Abstract:Digital Light Processing (DLP) is a 3D printing technology that enables the fabrication of complex, high-resolutionstructures; however, the mechanical properties of DLP-printed objects are often limited by the resins used. This study focuses on developing and characterizing bio-based polyester UV-curable resins with tunable mechanical properties optimized for DLP 3D printing. Bio-based polyester resins were synthesized by direct esterification polycondensation reaction of itaconic and/or succinic acids with 1,2-propane-, 1,4-butane-, and/or 1,8-octanediols followed by blending with triethylene glycol dimethacrylate. The bio-renewable nature of the resin components provides several advantages over traditional petroleum-derived resins. The diacid and diol monomers come from renewable feedstocks such as corn, soybean, and vegetable oils rather than finite fossil fuel reserves. Furthermore, bio-renewable materials lower dependence on petrochemicals and increase the sustainability of 3D printing. The effects of diacid structure and diol chain length on resin properties were systematically investigated. Chemical characteristics were investigated by NMR and FTIR and suggested successful synthesis of the desired bio-based polyesters. By varying the molecular design, diacid, and diol building blocks, the molecular weight, crosslink density, and mechanical performance were tailored. The liquid resins were characterized by gel permeation chromatography and rheological measurements, and solid and printed objects were characterized by static and dynamic tensile testing. Rheological studies confirmed all resin formulations displayed shear-thinning behavior ideal for SLA printing. Mechanical testing revealed that varying diacid and diol components could modulate tensile elastic modulus and elongation at break from 0.1-1.0 GPa and 3.5-8.5%, respectively. Printability was assessed by printing a resolution test structure on a DLP 3D printer equipped with a 405 nm UV source. This ability to tailor the properties of bio-based polyester resins by molecular design provides an avenue for fabricating high-performance SLA-printed objects targeted for specific applications ranging from prototypes to end-use products.

Improving the Performance of Photoactive Terpene-Based Resin Formulations for Light-Based Additive Manufacturing

(Meth)acrylate-Free Three-Dimensional Printing of Bio-Derived Photocurable Resins with Terpene- and Itaconic Acid-Derived Poly(ester-thioether)s

Improving the 3D Printability and Mechanical Performance of Biorenewable Soybean Oil-Based Photocurable Resins

Photoactive Resin Formulations and Composites for Optical 3D and 4D Printing of Functional Materials and Devices

Highly Tunable Thiol‐Ene Photoresins for Volumetric Additive Manufacturing

A renewably sourced, circular photopolymer resin for additive manufacturing

Itaconic-Acid-Based Sustainable Poly(ester amide) Resin for Stereolithography

Tailoring Mechanical Properties for Additive Manufacturing: Strategic Molecular Design of UV-Curable Bio-based Oligoester Resins via Diacid and Diol Exploration

Tailoring Mechanical Properties for Additive Manufacturing: Strategic Molecular Design of UV-Curable Bio-based Oligomeric Polyester Resins via Diacid and Diol Exploration

Selective Reactivity of Myrcene for Vat Photopolymerization 3D Printing and Postfabrication Surface Modification

Surface‐methacrylated microcrystalline cellulose bioresins with soybean oil for additive manufacturing via vat photopolymerization

Recyclable photoresins for light-mediated additive manufacturing towards Loop 3D printing

Additive and Lithographic Manufacturing of Biomedical Scaffold Structures Using a Versatile Thiol-Ene Photocurable Resin

Direct Restoration of Photocurable Cross-linkers for Repeated Light-based 3D Printing of Covalent Adaptable Networks

Photoinitiator Free Resins Composed of Plant-Derived Monomers for the Optical µ-3D Printing of Thermosets

Photocurable Itaconic Acid-Functionalized Star Polycaprolactone in Biobased Formulations for Vat Photopolymerization

DLP 3D printing of levoglucosenone‐based monomers: exploiting thiol‐ene chemistry for bio‐based polymeric resins

Glycerol-based Sustainably Sourced Resin for Volumetric Printing

Visible Light Photoinitiator for 3D-Printing of Tough Methacrylate Resins

Preparation and characterization of photocurable fluorinated polyether‐based reactive inks

Renewable Methacrylate Resins for 3D Printing Containing Dynamic Hydroxyester Linkages for Reprocessability