Abstract:In our previous 2D axisymmetric study of the spray-drying process, it was shown that the introduction of comprehensive formulation of drying kinetics had a substantial influence on both predicted gas and particle flow patterns in a spray dryer. On the other hand, it was demonstrated that the concept of 2D axisymmetric modeling is suitable for fast and low-resource consumptive numerical calculations of the spray-drying process and that the predicted velocity, temperature, and vapor mass fraction are of reasonable accuracy. However, due to their restrictions, 2D axisymmetric simulations fail to predict asymmetry of flow patterns and the presence of the transversal air flow and cannot provide actual 3D representation of particle trajectories inside the spray chamber. Therefore, in the present study a novel 3D theoretical model of multiscale multiphase transport phenomena in a steady-state spray-drying process is proposed for predicting more realistic particles paths, residence times, temperatures, and moisture contents. A drying process of silica slurry in a short-form pilot-scale spray dryer fitted with a pressure nozzle atomizer is investigated. The simulated 3D drying behavior of the dispersed phase and flow patterns of air velocity, temperature, and humidity are compared with the previously published results of 2D axisymmetric modeling. A significant influence of both drying kinetics and number of utilized dimensions on the predicted particle trajectories and transport phenomena in the drying chamber is observed. Hence, a proper formulation of the droplet drying kinetics and realistic 3D flow modeling is crucial for accurate numerical representation of the actual spray dryer performance.

Data-Driven Modeling of the Spray Drying Process. Process Monitoring and Prediction of the Particle Size in Pharmaceutical Production

Development of In-Line Measurement Techniques for Monitoring Powder Characteristics in a Multi-Stage Spray Drying Process

Particle morphology and shrinkage in spray dryers: A review focused on modeling single droplet drying

Mechanistic Formulation Design of Spray-Dried Powders

Unraveling Particle Formation: From Single Droplet Drying to Spray Drying and Electrospraying

Application of Near-Infrared Spectroscopy Combined with Design of Experiments for Process Development of the Pulsed Spray Fluid Bed Granulation Process

The design and scale-up of spray dried particle delivery systems

Dynamic Modeling of Micro- and Nano-Sized Particles Impinging on the Substrate During Suspension Plasma Spraying

Experimental Investigation of Spray Drying Breakup Regimes of a PVP-VA 64 Solution Using High-Speed Imaging

Spray drying of pharmaceuticals and biopharmaceuticals: Critical parameters and experimental process optimization approaches

Product-Property Guided Scale-Up of a Fluidized Bed Spray Granulation Process Using the CFD-DEM Method

Real‐time Droplet Size Analysis Using Laser Micrometer As a Process Analytical Technology Tool for Continuous Dripping Process

Data-Driven Dynamic Modeling and Online Monitoring for Multiphase and Multimode Batch Processes with Uneven Batch Durations

Empirical prediction model based process optimization for droplet size and spraying angle during pharmaceutical fluidized bed granulation

Application of Online Near Infrared for Process Understanding of Spray-Drying Solution Preparation

A meticulous overview on drying-based (spray-, freeze-, and spray-freeze) particle engineering approaches for pharmaceutical technologies

Advancements in spray drying, part II: From configuration to variegated applications in pharmaceuticals and chemical processing

Advantages and challenges of the spray-drying technology for the production of pure drug particles and drug-loaded polymeric carriers

Three-Dimensional Spray-Drying Model Based on Comprehensive Formulation of Drying Kinetics

Recent initiatives in effective modeling of spray drying

Describing the Drying and Solidification Behavior of Single Suspension Droplets Using a Novel Unresolved CFD-DEM Simulation Approach