Abstract:The micro-mechanical behavior of lamellar structured Ti6Al4V alloy was studied upon a small strain of 4.5 % compressional loading. The strain and stress concentration is found highly related to individual crystallographic orientation, their size, shape and grain-grain interaction, which usually concentrated along grain boundaries (GBs) typically soft and hard GBs owing to the strong strain gradient incurred. The generated local plastic deformation forms ledges through dislocation accumulation which further activate large amount of Geometrically necessary dislocations (GNDs) to accomodate strain incompatibility. Both strain and stress is maximized at some triple points (TPs). EBSD and crystal plasticity (CP) simulation disclosed some long range meso-bands (about 45° to loading direction) across multi-grains and mini-bands within grain interiors (GIs) with concentrated strain behavior which demonstrate slip and ductile behavior of the Ti6Al4V material. Prismatic slip is found dominated the slip behavior of the Ti6AL4V alloy (mostly from surface dislocation activation) which is away from some findings of literature and largely determined by its low critical resolved shear stress (CRSS). Dislocation is observed emitted from high angle grain boundaries (HAGBs) while slip transmission is observed through both low (LAGBs) and HAGBs. The substructures (α-lamellae), a type of LAGBs allocated within α-colonies, have no significant effect to dislocation movement. Fatigue failure can be inferred from the early stage of micro-mechanical behavior mainly judged by the amount of accumulated plastic deformation and induced stress/strain distribution amont the surroundings. Crack may nucleate from easy prismatic slip, local strain accumulation induced by soft and hard grain clustering (either hard embedded in soft or vice versa usually start from some TPs and sharp corners), or some concentrated long range slip activities. Other than the surface dents induced failure, shearing, cleavage, multi-cleavage and intergranular patterns is presumed highly related to the local microstructure, including their relative size, shape, orientation and grain-grain interactions. The multiple crack origins deemed for reduce fatigue life of shot peened samples regardless of the surface compressional residual stress being generated. The work helps understand the micro-mechanical deformation behavior (down to dislocation level) of Ti6Al4V alloy. Their fatigue and fracture can be inferred from such early stage of strain/stress behavior considering microstructural heterogeneities for similar alloys.

Compression and fretting wear studies of γ/α 2 duplex TiAl alloys at the nanoscale

A Study of Compression Deformation Behavior of Γ/α2 Interface in Γ(tial) Alloy Using Molecular Dynamics Simulation

An Atomic-Level Understanding of the Friction and Wear Behaviors of Ti2AlN/TiAl Composite Via MD Simulations

Tensile Behavior of Γ/α2 Interface System in Lamellar TiAl Alloy Via Molecular Dynamics

Molecular dynamics for nanoindentation in the γ/α 2 interfacial strengthening mechanism of a duplex full lamellar TiAl alloy

In-situ Synchrotron High Energy X-ray Diffraction Study on the Deformation Mechanisms of D019-α2 Phase During High-Temperature Compression in a TiAl Alloy

High Temperature Micromechanical Behavior of Ti2AlN Particle Reinforced TiAl Based Composites Investigated by In-Situ High-Energy X-ray Diffraction

Study on Nanoscale Friction Behavior of TiC/Ni Composites by Molecular Dynamics Simulations

Effect of the Micro-Structure Evolution of Friction Layer on the Sliding Tribology Behavior of TiAl-10 Wt.% Ag at 16 N-0.5 M/s

Micro-mechanical behavior of lamellar structured Ti6Al4V alloy upon compression via experimental and crystal plasticity study

Atomic-scale study of linear reciprocating friction of TCP/γ phase in nickel-based single crystal alloy

Mechanisms of remarkable wear reduction and evolutions of subsurface microstructure and nano-mechanical properties during dry sliding of nano-grained Ti6Al4V alloy: A comparative study

Dry Sliding Friction and Wear Characterization of in Situ TiC/Al-Cu3.7-Mg1.3 Nanocomposites with Nacre-Like Structures

Tribological Behavior of Extruded Spray-Forming 2195-T6 Al-Li Alloy at Different Loads Using Pin-on-disk Tribotester

Effects of Nano-Twinning on the Deformation and Mechanical Behaviours of TiAl Alloys with Distinct Microstructure at Elevated Loading Temperatures

Microcracking Behaviour of a TiAl-base Alloy with Different Microstructures During Compression

Fretting wear behaviors and mechanism of a high Nb–TiAl alloy with full lamellar microstructure at ambient temperature

Microstructure, Mechanical and Tribological Performances of a Directionally Solidified Γ-Tial Alloy

Microstructure, Tribological Behavior, and Strengthening Mechanisms of the Friction Interface Layer with Nanocrystalline Structure of Ni3Al Matrix Self-lubricating Composites

A Study of the Tribological Behavior of TiAl-10 Wt.%ag Composite Based on the Contact Stress Evolution

Nano-cutting deformation characteristics and atomic-scale behavior of two-phase γ/γ′ nickel-based single crystal superalloy