Abstract:In this paper, the main purpose was to investigate the effects of laser peening (LP) on the microstructural evolution and frictional wear resistance of TC6 titanium alloy. The surface topographic features, microhardness and residual stress distribution in the depth direction of differently treated specimens were measured using three-dimensional topography instrument, digital microhardness tester and residual stress instrument. The frictional wear test was carried out using a multifunctional friction wear tester. Meanwhile, X-ray diffraction (XRD), optical microscope (OM) and transmission electron microscopy (TEM) were utilized to investigate the effects of LP on the microstructural response of TC6 titanium alloy. The results indicated that the micro-pits induced by LP increased the surface roughness to a maximum of 6.94 μm. LP technique effectively improved the microhardness and frictional wear resistance of TC6 titanium alloy, and the wear form changed from abrasive wear, adhesive wear and fatigue spalling wear to abrasive wear at the laser energy of 8 J. Compared to the untreated specimens, the surface microhardness of the specimens treated by LP with 8 J increased from 356 HV to 442 HV, and the affected layer depth was approximately 500 μm. Moreover, the friction coefficient decreased from 1.2 to 0.5, the abrasion depth of the abrasion track was reduced by approximately 32 % compared to the untreated specimen. Additionally, the surface compressive residual stress induced by LP with 8 J reached about −510 MPa. The microstructural evolution of the specimens processed by LP was dominated by twin formation and dislocation slip, while the intercalation between multidirectional twins and the formation of sub-grain boundaries promoted grain refinement of TC6 titanium alloy. Refined grains, high density of dislocations, mechanical twins and the implantation of compressive residual stresses effectively improved the friction and wear resistance of TC6 titanium alloy.

Dynamic response and roughness control of surface materials on TC4 titanium alloy subjected to laser shock wave planishing

Effect of Surface Roughness and Compressive Residual Stress on the Fatigue Performance of TC4 Titanium Alloy Subjected to Laser Shock Wave Planishing

Effects of Different Laser Shock Processes on the Surface Morphology and Roughness of TC4 Titanium Alloy

Simulation of Residual Stress and Micro-plastic Deformation Induced by Laser Shock Imprinting on TC4 Titanium Alloy Aero-engine Blade

Surface residual stress, micro-hardness and geometry of TC6 titanium alloy thin-wall parts processed by multiple oblique laser shock peening

Analysis of laser shock waves and resulting surface deformations in an Al–Cu–Li aluminum alloy

Laser shock processing of titanium alloys: a critical review on the microstructure evolution and enhanced engineering performance

Fabrication of TiN Coatings Deposited on Laser Shock Micro-Textured Substrates for Improving the Interface Adhesion Properties of Coatings

Relationship between surface residual stress and dislocation configuration after laser shock processing of TC4 titanium alloy

High temperature wear performance of Ti–6.5Al–3.5Mo–1.5Zr–0.3Si alloy subjected to laser shock peening

Numerical investigation on spall fracture in a metallic material caused by laser shock peening

Formation Mechanism and Control Method of Residual Stress Profile by Laser Shock Peening in Thin Titanium Alloy Component

Investigations on femtosecond laser-induced surface modification and periodic micropatterning with anti-friction properties on Ti6Al4V titanium alloy

Microstructural response and surface mechanical properties of TC6 titanium alloy subjected to laser peening with different laser energy

Two-step laser based surface treatments of laser metal deposition manufactured Ti6Al4V components

Effect of fretting wear on TC4 alloy prepared by laser shock peening at high temperature

Laser shock peened Ti-6Al-4 V alloy: Experiments and modeling

Microstructure evolution and mechanical properties of a lamellar near-α titanium alloy treated by laser shock peening

Combining laser surface texturing and double glow plasma surface chromizing to improve tribological performance of Ti6Al4V alloy

Unveiling the origins of work-hardening enhancement and mechanical instability in laser shock peened titanium

The Influence of Absorbing Coating Material on the Efficiency of Laser Shock Peening