Abstract:Surface topography strongly modifies adhesion of hard-material contacts, yet roughness of real surfaces typically exists over many length scales. This investigation aims to determine which scales of topography have the strongest effect on macroscopic adhesion. Adhesion measurements were performed on technology-relevant diamond coatings of varying roughness using spherical ruby probes that are large enough ($0.5$-mm-diameter) to sample all length scales of topography. For each material, more than $2000$ measurements of pull-off force were performed in order to investigate the magnitude and statistical distribution of adhesion. Using sphere-contact models, the roughness-dependent effective values of work of adhesion were measured, ranging from $0.08$ to $7.15$ mJ/m$^2$ across the four surfaces. The data was more accurately fit using numerical analysis, where an interaction potential was integrated over the AFM-measured topography of all contacting surfaces. These calculations revealed that consideration of nanometer-scale plasticity in the materials was crucial for a good quantitative fit of the measurements, and the presence of such plasticity was confirmed with AFM measurements of the probe after testing. This analysis enabled the extraction of geometry-independent material parameters; the intrinsic work of adhesion between ruby and diamond was determined to be $46.3$ mJ/m$^2$. The range of adhesion was $5.6$ nm, which is longer than is typically assumed for atomic interactions, but is in agreement with other recent investigations. Finally, the numerical analysis was repeated for the same surfaces but this time with different length-scales of roughness included or filtered out. The results demonstrate a critical band of length-scales between $43$ nm and $1.8$ nm in lateral size that has the strongest effect on the total adhesive force for these hard, rough contacts.

When are rough surfaces sticky?

On stickiness of multiscale randomly rough surfaces

Adhesive Contact on Randomly Rough Surfaces Based on the Double-Hertz Model

Hard-material Adhesion: Which Scales of Roughness Matter?

Why soft contacts are stickier when breaking than when making them

Adhesion Force and Contact Surface Area for Particles with Rough Surfaces

Adhesive Effects on Dynamic Friction for Unlubricated Rough Planar Surfaces

A note on the possibility of roughness enhancement of adhesion in Persson's theory

Strongly Different Adhesion Reduction for 1D or 2D Random Fractal Roughness, and an Extension of the BAM Model to Anisotropic Surfaces

Theory of adhesion: role of surface roughness

Experimental insights into adhesion and friction between nominally dry rough surfaces

Adhesive Contact of Elastic Solids with Self-Affine Fractal Rough Surfaces

Adhesion of Elastic Wavy Surfaces: Interface Strengthening/weakening and Mode Transition Mechanisms

Combined Effects of Viscoelasticity and Surface Roughness on the Adhesion Behavior of a Flat-End Cylindrical Microstructure

Adhesive Contact Mechanics: from Deterministic to Stochastic Description

On roughness-induced adhesion enhancement

On the Adhesive Nanocontact of a Graded Coating

Dependence of Adhesive Friction on Surface Roughness and Elastic Modulus

Two-dimensional finite element analysis of elastic adhesive contact of a rough surface

Contact and Friction of Nano-Asperities: Effects of Adsorbed Monolayers