Abstract:Fringe fields in multipole magnets can have a variety of effects on the linear and nonlinear dynamics of particles moving along an accelerator beamline. An accurate model of an accelerator must include realistic models of the magnet fringe fields. Fringe fields for dipoles are well understood and can be modelled at an early stage of accelerator design in such codes as MAD8, MADX or ELEGANT. However, usually it is not until the final stages of a design project that it is possible to model fringe fields for quadrupoles or higher order multipoles. Even then, existing techniques rely on the use of a numerical field map, which will usually not be available until the magnet design is well developed. Substitutes for the full field map exist but these are typically based on expansions about the origin and rely heavily on the assumption that the beam travels more or less on axis throughout the beam line. In some types of machine (for example, a non-scaling FFAG such as EMMA) this is not a good assumption. In this paper, a method for calculating fringe fields based on analytical expressions is presented, which allows fringe field effects to be included at the start of an accelerator design project. The magnetostatic Maxwell equations are solved analytically and a solution that fits all orders of multipoles derived. Quadrupole fringe fields are considered in detail as these are the ones that give the strongest effects. Two examples of quadrupole fringe fields are presented. The first example is a magnet in the LHC inner triplet, which consists of a set of four quadrupoles providing the final focus to the beam, just before the interaction point. Quadrupoles in EMMA provide the second example. In both examples, the analytical expressions derived in this paper for quadrupole fringe fields provide a good approximation to the field maps obtained from a numerical magnet modelling code.

Extraction of 3D field maps of magnetic multipoles from 2D surface measurements with applications to the optics calculations of the large-acceptance superconducting fragment separator BigRIPS

Three Dimensional Compensation Spherical Coils for Compact Atomic Magnetometers

Using Magnetic Moment for Field Reconstruction in Accelerator Magnets and Particle Tracking

Accurate Taylor transfer maps for large aperture iron dominated magnets used in charged particle separators and spectrometers

Quantitative Assessment of Finite-element Models for Magnetostatic Field Calculations

Magnetic design study of coil-dominated superconducting quadrupole magnets based on racetrack coils

An octahedral Mach B-dot probe for 3D flows and magnetic fields in the edge of reversed field pinches

Magnetic Field Measurement, Shimming and Processing for 230 MeV Superconducting Cyclotron Main Magnet

Effective point-charge analysis of crystal electric fields -- application to rare-earth pyrochlores and tripod kagome magnets R3Mg2Sb3O14

Three-dimensional simulation of electron extraction process and optimization of magnetic field based on multi-aperture structure of negative hydrogen ion source

Experimental and Simulation Studies of SCIF Considering Non-Uniform Critical Current

Analytical expressions for fringe fields in multipole magnets

Fermi Surface Mapping of the Kagome Superconductor RbV3Sb5 Using De Haas-van Alphen Oscillations

Design of a 30-T Superconducting Magnet for Quantum Oscillation Application

Design and Fabrication of a 13-T Twin-Aperture Superconducting Dipole Magnet with Graded Common-Coil Configuration

Development of a 1/2-length prototype high field Nb3Sn magnet for the 4th generation ECR ion source

Magnetic Field Analysis and Measurement of Pulsed Septum Magnet

Research on the Evolution Characteristics of REBCO Inductance for 19 T All-Superconducting Magnet

Magnetic Field Optimization and Tolerance Study of a Medical Superconducting Cyclotron

Modelling and design of permanent magnet multipoles for beam transport and focusing. II. Configuring the quad

Precise Ion Optical Description of Strip-Line Pulsed Magnetic Lenses