Abstract:The inner detector of the present ATLAS experiment has been designed and developed to function in the environment of the present Large Hadron Collider (LHC). At the ATLAS Phase-II Upgrade, the particle densities and radiation levels will exceed current levels by a factor of ten. The instantaneous luminosity is expected to reach unprecedented values, resulting in up to 200 proton-proton interactions in a typical bunch crossing. The new detectors must be faster and they need to be more highly segmented. The sensors used also need to be far more resistant to radiation, and they require much greater power delivery to the front-end systems. At the same time, they cannot introduce excess material which could undermine tracking performance. For those reasons, the inner tracker of the ATLAS detector was redesigned and will be rebuilt completely. The ATLAS Upgrade Inner Tracker (ITk) consists of several layers of silicon particle detectors. The innermost layers will be composed of silicon pixel sensors, and the outer layers will consist of silicon microstrip sensors. This contribution focuses on the strip region of the ITk. The central part of the strip tracker (barrel) will be composed of rectangular short (∼2.5 cm) and long (∼5 cm) strip sensors. The forward regions of the strip tracker (end-caps) consist of six disks per side, with trapezoidal shaped sensors of various lengths and strip pitches. After the completion of final design reviews in key areas, such as Sensors, Modules, Front-End electronics, and ASICs, a large scale prototyping program has been completed in all areas successfully. We present an overview of the Strip System and highlight the final design choices of sensors, module designs and ASICs. We will summarise results achieved during prototyping and the current status of pre-production and production on various detector components, with an emphasis on QA and QC procedures.

Silicon strip prototypes for the Phase-II upgrade of the ATLAS tracker for the HL-LHC

Characterisation of silicon microstrip detectors for the ATLAS Phase-II Upgrade with a micro-focused X-ray beam

Investigation of HV/HR-CMOS Technology for the ATLAS Phase-II Strip Tracker Upgrade

Silicon detectors for the LHC Phase-II upgrade and beyond. RD50 status report

The CMS Silicon Strip Tracker - Overview and Status

ATLAS ITk strip detector for the Phase-II Upgrade

Prototyping and qualification of 2S modules for the CMS Outer Tracker upgrade at the HL-LHC

The ATLAS ITk Strip detector system for the Phase-II LHC upgrade

Quality Inspection Aspects of Hybrid Prototypes for the CMS Outer Tracker Upgrade at HL-LHC

Characterization, Simulation and Test Beam Data Analysis of Stitched Passive CMOS Strip Sensors

The Silicon Sensors for the High Granularity Calorimeter of CMS

Design, production, burn-in and tests of the hybrid circuits of the Upstream Tracker at the LHCb detector

Study of CMOS Strip Sensor for Future Silicon Tracker

The Silicon Microstrip Tracker for CMS

Study of Built-in Amplifier Performance on HV-CMOS Sensor for the ATLAS Phase-Ii Strip Tracker Upgrade

Characterisation of novel thin n-in-p planar pixel modules for the ATLAS Inner Tracker upgrade

Testbeam Studies of Barrel and End-Cap Modules for the ATLAS ITk Strip Detector Before and after Irradiation

Characterisation, simulation and test beam data analysis of stitched passive CMOS strip sensors

Developments in Readout for Silicon Microstrip Sensors at a Linear Collider Detector

Novel Silicon n-on-p Edgeless Planar Pixel Sensors for the ATLAS upgrade

Radiation Hardness of Two CMOS Prototypes for the ATLAS HL-LHC Upgrade Project.