Abstract:Textures and residual stresses are generated during electrodeposition of chromium coatings, which directly affect the performance of the coating. In this work, the variations of texture, hydrogen content, residual stress, microhardness and corrosion resistance of chromium deposited from hexavalent [Cr(VI)] chromium bath using direct current deposited technique were investigated. Electrodeposition experiments were carried out on the low carbon steel substrate by varying the key variable current density. The macrotexture of the coatings was studied by XRD. The crystal orientation and dislocation density were analyzed by EBSD. Residual stress was measured by the indentation method. The research demonstrated that a single preferred orientation on the (222) plane was found at current densities of 20 A/dm 2 , 35 A/dm 2 and 50 A/dm 2 . At 40 A/dm 2 , a mixed preferred orientation on the (222) + (211) planes was discovered. Furthermore, the formation of the chromium coating texture was affected by the variation of hydrogen content, for higher hydrogen promoting grain growth along the (222) crystal plane. Notably, the microstructure-property relationship was developed. At the single preferred orientation of (222) plane, the corrosion resistance was more favorable. At the mixed preferred orientation of (222) + (211) planes, the coating surface achieved higher microhardness, but formed higher residual stress and more microcracks. Moreover, the better electroplating parameter was proposed. At 35 A/dm 2 , the coating had the fewer microcracks and the better overall performance. The higher microhardness of 753 HV was found. The more favorable corrosion resistance was discovered, with the breakdown potential and passive current density of 804.7 mV and 2.220 × 10 −6 A/dm 2 . The lower residual stress of 61 MPa was found, which was about 81 % lower than the maximum stress. It was significant in industry for the enhancement of the service life of substrate and the optimization of the chromium coating process.

Surface composition and depth profile analysis of sulphate and chloride-based trivalent chromium electrodeposits using X-ray photoelectron spectroscopy

Investigation of the trivalent-chrome coating on 6063 aluminum alloy

EIS Investigation of the Deposition of Trivalent Chromium Coatings on Al 6063 Alloy

Improved electrochemical performance of trivalent-chrome coating on Al 6063 alloy via urea and thiourea addition

Chromium Distribution, Leachability and Speciation in a Chrome Plating Site

XPS on corrosion products of ZnCr coated steel: on the reliability of Ar+ ion depth profiling for multi component material analysis

Research on Process of Hard Chromium Electroplating with Trivalent Chromium Sulfate Electrolyte

Effect of Chromate on the Electrochemical Behavior of Sintered Zn–Al Coating in Seawater

Relationship between Texture, Hydrogen Content, Residual Stress and Corrosion Resistance of Electrodeposited Chromium Coating: Influence of Heat Treatment

Microstructure and corrosion behavior of Cr and Cr–P alloy coatings electrodeposited from a Cr(III) deep eutectic solvent

Effect of current density on the texture, residual stress, microhardness and corrosion resistance of electrodeposited chromium coating

Corrosion Behavior of Chromium-Free Dacromet Coating in Seawater

Corrosion resistance of electroplated coatings based on chromium trivalent-baths

Recent Status and Development of Composite Electrodeposition from Trivalent Chromium Bath

SECM in Situ Investigation of Corrosion and Self-Healing Behavior of Trivalent Chromium Conversion Coating on the Zinc

Application of the analytical methods REM/EDX, AES and SNMS to a chlorine induced aluminium corrosion

Surface Characterization of Stainless Steels Prepared with Various Surface Treatments

Study of single-metal multi-nanometer electrodeposition chromium layer

Comparison of Surface Fractal Dimensions of Chromizing Coating and P110 Steel for Corrosion Resistance Estimation

Assessment of thermal stability of chromium-rich electroplating sludge

The effects of main salt concentrations and deposition voltages on the structures and properties of cathode plasma electrolytic deposited Cr2O3 coatings