Abstract:Transverse 2D phase space distribution of a 2.1 MeV, 5 mA H$^-$ beam is measured at the PIPIT test accelerator at Fermilab with an Allison scanner. The paper describes the design, calibration, and performance of the scanner as well as the main results of the beam measurements. Analyses of the recorded phase portraits are performed primarily in action-phase coordinates; the stability of the action under linear optics makes it easier to compare measurements taken with different beamline conditions, e.g. in various locations. The intensity of a single measured point (\pixel") is proportional to the phase density in the corresponding portion of the beam. When the Twiss parameters are calculated using only the high-phase density part of the beam, the pixel intensity in the beam core is found to be decreasing exponentially with action and to be phase-independent. Outside of the core, the intensities decrease with action at a significantly slower rate than in the core. This `tail' comprises 10-30% of the beam, with 0.1% of the total measured intensity extending beyond the action 10-20 times larger than the rms emittance. The transition from the core to the tail is accompanied by the appearance of a strong phase dependence, which is characterized in action-phase coordinates by two `branches' extending beyond the core. A set of selected measurements shows, in part, that there is no measurable emittance dilution along the beam line in the main portion of the beam; the beam parameters are practically constant over a 0.5 ms pulse; and scraping in various parts of the beam line is an effective way to decrease the transverse tails by removing the branches.

A pepper-pot emittance meter for low-energy heavy-ion beams

Single Shot Transverse Emittance Measurement of multi-MeV Electron Beams Using a Long Pepper-Pot

A PEPPER-POT BASED DEVICE FOR DIAGNOSTICS OF THE SINGLE-SHOT BEAM*

Emulsion Cloud Chamber technique to measure the fragmentation of a high-energy carbon beam

A Numerical Approach to Designing a Versatile Pepper-pot Mask for Emittance Measurement

Characterizing ultra-low emittance electron beams using structured light fields

A SINGLE-SHOT BEAM CHARACTERIZATION DEVICE BASED ON THE PEPPER-POT PRINCIPLE*

FOUR-DIMENSIONAL TRANSVERSE EMITTANCE MEASUREMENT UNIT FOR HIGH INTENSITY ION BEAMS*

A High-Current Microwave Ion Source with Permanent Magnet and Its Beam Emittance Measurement

Limitations of emittance and source size measurement of laser-accelerated electron beams using the pepper-pot mask method

Emittance Measurement along Transport Beam Line for Laser Driven Protons

Knife-edge based measurement of the 4D transverse phase space of electron beams with picometer-scale emittance

Allison Scanner for High-Current Ion Beam Emittance Measurements

Measurements of a 2.1 MeV H$^-$ beam with an Allison scanner

A Resonant Cavity for Single-Shot Emittance Measurement

Nanometer Emittance Ultralow Charge Beams From Rf Photoinjectors

Beam Emittance Measurement and Plasma Channel Properties for Channel-Based Ion Beam Transport

Development of High Intensity Beam Emittance Measurement Unit

A system for online beam emittance measurements and proton beam characterization

Low-energy Ion Beam Diagnostics: An Integrated Solution