Abstract:Spent lithium-ion batteries (LIBs) contain large amounts of scarce metals, such as Li, Co, Al, Ni, and Mn, and are precious secondary resources. The leaching of spent LIBs using organic acids is considered to be an effective and feasible method for recovering these metals. However, the separation of Li, Co, Ni, and Mn in a solution is difficult to achieve. Using an extractant consisting of 15 % Cyanex272, 10 % tributyl phosphate, and 75 % sulfonated kerosene (v/v) and an organic to aqueous phase ratio of 1:1, over 90.13 % of Al, 95.72 % of Co, and 98.93 % of Mn were extracted. Only 2.05 % of Li and 2.68 % of Ni were co-extracted. The slope method and infrared spectra analysis showed that the extraction processes of Al, Co, and Mn with Cyanex272 follow cationic exchange mechanisms; the acetate anions introduced during the leaching participated in the extraction mechanism of Co. The thermodynamic parameters of Gibb’s free energy, enthalpy change, and entropy change for the extraction reactions were all lower than zero, indicating that the extraction reactions are exothermic and spontaneous and increase the disorder. After washing with NH4HSO4 1 M, most of the Co and Mn were removed, and a negligible amount of Al was lost. By adding 2.5 times the stoichiometric amount of (NH4)2S2O8 to the washing solution and heating at 363.15 K for 40 min, 99.3 % of the Mn was precipitated as MnO2 with a purity of 96.73 %. After removing Mn, Co2+ was precipitated as CoC2O4·2 H2O using anhydrous oxalic acid; Co3O4 with a purity of 98.13 % was subsequently obtained by calcination. This study demonstrates the potential of hydrometallurgical processes for the treatment of spent LIBs and provides insights into strategies for the utilization of secondary resources.

Novel Technology for the Removal of Fe and Al from Spent Li-Ion Battery Leaching Solutions by a Precipitation–Complexation Process

Removal of impurity metals as phosphates from Lithium-ion battery leachates

Separation of lithium and transition metals from the leachate of spent lithium-ion battery by extraction-precipitation with p-tert-butylphenoxy acetic acid

Two Targets, One Strike: Efficient Recovery of Lithium and Simultaneous Removal of Impurities from Spent LFP Batteries Via Ferric Ions Assisted Air Oxidation Method

Removal of iron, aluminium, manganese and copper from leach solutions of lithium-ion battery waste using ion exchange

Recovery of metals from sulfate leach solutions of spent ternary lithium-ion batteries by precipitation with phosphate and solvent extraction with P507

Separation of Co and Mn from acetic acid leaching solution of spent lithium-ion battery by Cyanex272

Separation of metals from acetic acid leaching solution of spent lithium-ion batteries by ionic liquid system

An entire recycling of spent Al-bearing cathode powder as giniite sphere and lithiophophate plate with leaching-hydrothermal-precipitation process

Removal of impurity elements from waste lithium-ion batteries powder by oxidation roasting, cyclic leaching, and precipitation method

Use of ferric salt solutions as leaching agents of Co, Ni, Cu, Fe, and Mn from metallic alloys of spent lithium-ion batteries and separation of iron from the leaching solution

Selective leaching of lithium from mixed spent lithium iron phosphate powder

Acid-Free Leaching Nickel, Cobalt, Manganese, and Lithium from Spent Lithium-Ion Batteries Using Fe(II) and Fe(III) Solution

Separation and recovery of valuable metals from spent lithium-ion batteries via concentrated sulfuric acid leaching and regeneration of LiNi1/3Co1/3Mn1/3O2

Recycling of Valuable Metals from the Priority Lithium Extraction Residue Obtained through Hydrogen Reduction of Spent Lithium Batteries

Built-in anionic equilibrium for atom-economic recycling of spent lithium-ion batteries

High-selective separation recovery of Ni, Co, and Mn from the spent LIBs via acid dissolution and multistage oxidation precipitation

Process for recycle of spent lithium iron phosphate battery via a selective leaching-precipitation method

Efficient Separation of Aluminum Foil and Cathode Materials from Spent Lithium-Ion Batteries Using a Low-Temperature Molten Salt

The priority leaching of lithium from spent LiFePO4 cathode without the oxidization

Stepwise Recovery Of Valuable Metals From Spent Lithium Ion Batteries By Controllable Reduction And Selective Leaching And Precipitation