Abstract:The glycerol generated as a by-product in the production of biodiesel could be used as a renewable raw material to economically promote the production process. The catalytic conversion of glycerol to a product with higher added value, such as glycerol carbonate, has attracted great interest in the chemical, pharmaceutical, and lithium battery industries, among others, due to its low toxicity, hydration capacity, and biodegradability. Layered-double hydroxide (LDH) materials, the precursors of the catalysts, were synthesized by a direct coprecipitation method to incorporate a third metal ion in addition to magnesium and aluminum ions. This method is the easiest regularly applied technique to design these low cost anionic nanoclay. The atomic percentage of Cu, Zn, or Ni incorporated was 15% of the Mg load in the material. The synthesis atomic ratio, (M 2+ +Mg 2+ )/Al 3+ had a constant value of 3, where M represents the transition metal incorporated. LDHs produced the corresponding mixed metal oxides by thermal decomposition. These materials have excellent properties for reactions catalyzed by the basic sites, high surface area, homogeneous cation dispersion, and thermal stability. The physicochemical material properties were characterized by XRD, N 2 sorption, MP-AES, TPD-CO 2 , SEM, and XPS. The mixed oxides were evaluated in the catalytic conversion of glycerol to glycerol carbonate. The addition of Cu, Ni, or Zn to the matrix of Mg and Al produced changes in its physicochemical properties and mostly in the catalytic activity. X-ray diffractograms of LDHs showed the typical characteristic structure of layers even with metallic ions of Cu, Ni, or Zn incorporated, because their ionic radii are similar to that of the Mg ion, 0.69, 0.73, and 0.74 Å, respectively. The obtained mixed oxides showed a high catalytic activity towards the conversion of glycerol to glycerol carbonate under mild reaction conditions, a 1:2 ratio of glycerol:ethylene carbonate and solvent free. Relative yields higher than 80% were obtained, attributable to an adequate distribution of basicity and textural parameters. The catalysts were used in successive reaction cycles without significant loss of activity.

Oxidation of glycerol to a lactic, glycolic acid mixture using a Li, Ni, Mn, Co oxide catalyst and p-TsOH—SnCl2 catalyzed polymerization to poly(lactic-co-glycolic acid)

Oxidative Lactonization of Diethylene Glycol to High-Value-added Product 1, 4-Dioxan-2-one Promoted by a Highly Efficacious and Selective Catalyst ZnO-ZnCr2O4

Melt Polycondensation of L‐lactic Acid Catalyzed by 1,3‐dialkylimidazolium Ionic Liquids

Solvent-Free Acetalization of Glycerol with N-Octanal Using Combined Brønsted Acid-Surfactant Catalyst

Oligomerization of glycerol on layered sodium silicate catalysts

Zinc Glycerolate: an Unconventional Heterogeneous Catalyst for the Glycerolysis of Fatty Acids in Biodiesel Production

Robust Iridium Coordination Polymers: Highly Selective, Efficient, and Recyclable Catalysts for Oxidative Conversion of Glycerol to Potassium Lactate with Dihydrogen Liberation

Selective electrooxidation glycerol to lactic acid coupled with hydrogen production over a cooperative BiOx/Au catalyst

Mixed oxides from calcined layered double hydroxides for glycerol carbonate production to contribute to the biodiesel economy

Production of Lactic Acid via Catalytic Transfer Dehydrogenation of Glycerol Catalyzed by Base Metal Salt Ferrous Chloride and Its NNN Pincer-Iron Complexes

Spent Li-Ion Battery Electrode Material with Lithium Nickel Manganese Cobalt Oxide as a Reusable Catalyst for Oxidation of Biofurans

Glycerol carbonate synthesis via transesterification of enriched glycerol and dimethyl carbonate using a Li-incorporated MCM-41 framework

Highly Efficient Process for the Conversion of Glycerol to Acrylic Acid via Gas Phase Catalytic Oxidation of an Allyl Alcohol Intermediate

Etherification of glycerol into short-chain polyglycerols over MgAl LDH/CaCO3 nanocomposites as heterogeneous catalysts to promote circular bioeconomy

Nanostructured Solid/Liquid Acid Catalysts for Glycerol Esterification: The Key to Convert Liability into Assets

Selective Catalytic Dehydrogenative Oxidation of Bio-Polyols to Lactic Acid

Valorization of biodiesel byproduct glycerol to glycerol carbonate using highly reusable apatite-like catalyst derived from waste Gastropoda Mollusca

Synthesis of Acetylglycerols over Hierarchical Porous Sulfonated Polymeric Solid Acid

Selective glycerol to lactic acid conversion via a tandem effect between platinum and metal oxides with abundant acid groups

Can Glycerol Carbonate be Synthesized Without a Catalyst?

Efficient Co-Synthesis of Glycolic Acid and Formic Acid from 1,3-Dihydroxyacetone by Keggin Cesium Phosphomolybdates