Abstract:Permanent magnet brushless dc (BLDC) motors are very convenient for many applications such as industrial, medical, robotic, aerospace, small electric vehicles, and home applications because of their inherent satisfying dynamic characteristics. There are numerous studies about these motors and their control schemes such as sensorless control and different speed and torque control schemes. All electric motors need commutation in order to produce speed and torque. Commutation in brushed DC motors is performed by means of a brush and collector. In BLDC motors, commutation is provided electronically in contrast to the brushed dc motors. In BLDC motors, motor phase windings are energized according to the information of the rotor position by inverter transistors. Rotor position information is used for commutation. Therefore, rotor position information is required to produce speed and torque for BLDC motors. The easiest and cheapest way to obtain rotor position information is to use Hall-effect or optical sensors. BLDC motor manufacturers generally produce BLDC motors equipped with three Hall-effect position sensors. Having three position sensors on BLDC motors provides six-step commutation which ensures two phase windings are energized in each moment. The third phase is empty. In this study, all phase windings are energized in the same time. This commutation method is twelve-step or 150 degrees commutation. So that more speed can be achieved from the same BLDC motor by comparison with six-step commutation. In this paper, both six-step and twelve-step commutation methods applied to the same BLDC motor and obtained experimental results from this study were presented, examined, and discussed.

Fast Self-Correction Commutation Method for High-Speed Sensorless BLDCMs With Nonideal Asymmetric Back EMF

A Novel Adaptive Commutation Angle Method for Single Phase BLDC Motor

An Enhanced Sensorless Control Scheme for PMSM Drives Considering Self-inductance Asymmetry

Auto-correction Commutation Method Based on Phase Voltage Threshold for Position Sensorless Brushless DC Motor

A PLL-Based Novel Commutation Correction Strategy for a High-Speed Brushless DC Motor Sensorless Drive System

Closed-loop correction strategy for commutation deviation of BLDC motor based on internal power factor angle detection

Implementation of a MFAC based position sensorless drive for high speed BLDC motors with nonideal back EMF

Adaptive Sensorless Control of High Speed Surface-Mounted PMSM Drives with Inductance Estimator Based on Current Error

A Position Sensorless Control Strategy for the BLDCM Based on a Flux-Linkage Function

Reasearch on Sensorless PM Brushless DC Motor Starting Control

Low Power Consumption Control Method for BLDCM with Very Small Inductance and Nonideal Back EMF

Investigation of PMSM Back-EMF using Sensorless Control with Parameter Variations and Measurement Errors

Research and Verification of a Novel Sensorless Control Algorithm for Brushless Direct Current Motor

Design, implementation, and application of 150-degree commutation VSI to improve speed range of sensored BLDC motor

Control of High-Speed Sensorless PM Brushless DC Motors

Self-Correction of Feedback Current for Low-Inductance PMSM Driving in Motor and Generator States

A Controlled Mechanical–Electronic Hybrid Commutation Theory and Position Sensorless Control

Sensorless control of BLDC motors using an improved low-cost back EMF detection method

Correction of Rotor Position Estimation Error for High-Speed Permanent Magnet Synchronous Motor Sensorless Drive System Based on Minimum-Current-Tracking Method

An Analysis of Step-by-step Startup of Brushless DC Motors Based on Back-EMF Inspection