Abstract:Purpose - The purpose is to present a sensorless control method by which high-resolution rotor position information is estimated and used for phase-advancing operation of a high-speed permanent magnet (PM) brushless DC (BLDC) motor.Design/methodology/approach - The proposed sensorless control approach uses hardware to observe the flux vector which is excited by rotor magnets. It can provide the rotor position which is the same as the phase angle of the observed flux vector.Findings - High-resolution rotor position signal of the BLDC motor for dynamic phase-advancing control cannot be directly obtained from the conventional Hall-effect sensors, or via the traditional back-EMF-based sensorless control strategies in which the back-EMF may be even undetectable at high-speed. The proposed rotor-flux-observer (RFO)-based sensorless control method overcomes these problems, and meanwhile provides high-resolution rotor position information for the phase-advancing purpose.Originality/value - The RFO-based sensorless control is traditionally applied to PM brushless ac (BLAC) operations, where the motor voltage vector can be calculated from the inverter switching status. However, this is not readily applicable to a BLDC motor since the voltage of the floating phase cannot be calculated. Moreover, during high-speed operation, the microprocessor may not be sufficiently fast to calculate the high-resolution rotor position. Therefore, in this paper, it is proposed to use hardware to observe the rotor-flux-vector. The microprocessor only samples the vector's alpha- and beta-components and calculates the phase angle, hence, its burden is low. The proposed method is validated with a 1.8 kW 85,000 rpm BLDC motor system.

Implementation of a MFAC based position sensorless drive for high speed BLDC motors with nonideal back EMF

An Enhanced Sensorless Control Scheme for PMSM Drives Considering Self-inductance Asymmetry

A Novel Starting Method of Sensorless BLDC Motors for Electric Vehicles

Adaptive Sensorless Control of High Speed Surface-Mounted PMSM Drives with Inductance Estimator Based on Current Error

A Position Sensorless Control Strategy for the BLDCM Based on a Flux-Linkage Function

Fuzzy Neural Network Applied in Sensorless BLDC Motor Control Based on MC56F8013

Fast Self-Correction Commutation Method for High-Speed Sensorless BLDCMs With Nonideal Asymmetric Back EMF

Position Sensor-less and Adaptive Speed Design for Controlling Brush-less DC Motor Drives

Sensorless control of BLDC motors using an improved low-cost back EMF detection method

Control of High-Speed Sensorless PM Brushless DC Motors

Comparative Performance Evaluation of Hall Effect Sensorless Control Options in Permanent Magnet Brushless DC Motor Drives

Full-Region Sensorless BLDC Drive for Permanent Magnet Motor Using Pulse Amplitude Modulation With DC Current Sensing

DC-link current based position estimation and speed sensorless control of a BLDC motor used for electric vehicle applications

Sensorless High‐speed BLDC Machine Using Hardware‐rfo

Low Power Consumption Control Method for BLDCM with Very Small Inductance and Nonideal Back EMF

Design of Control System for BLDCM Without Position Sensor

Position and Speed Control of Brushless DC Motors Using Sensorless Techniques and Application Trends

A PLL-Based Novel Commutation Correction Strategy for a High-Speed Brushless DC Motor Sensorless Drive System

A Novel Sensorless Control System of Brushless DC Motors

Analysis and Compensation of Position Estimation Error for Sensorless Reduced DC-Link Capacitance IPMSM Drives