Abstract:Dielectric elastomers (DEs) featured with fast reversible and large deformation excited by an external electric field show promising applications as leading artificial muscle materials in many emerging technologies. It remains a great challenge to synthesize a DE simultaneously with high electromechanical performance (large actuation strain, high energy density, free of pre-stretch and bracing) and excellent mechanical properties (low Tg, low viscous loss, low modulus, and high mechanical strength). Herein, we propose and demonstrate that end-block-curing ABA triblock copolymer elastomer with well-designed structures is a new strategy to address the challenge by taking advantage of the microphase separation nature of the block copolymer. Particularly, poly (styrene-b-butyl acrylate-b-styrene) (SBAS) with post-curable end blocks, i.e. polystyrene (PS) blocks, are designed and synthesized. Different levels of cyclohex-3-enylmethyl acrylate (CEA) that contains two asymmetric vinyl groups with very different reactivity are incorporated into the end blocks for end-block curing while the molecular weight for each block is fixed. It is found that curing the end blocks enhances the strain-hardening effect during stretch and thus significantly increases the electro-mechanical performance. Without pre-stretch, the DE actuator of the end block cured SBAS exhibits a maximum actuation strain up to 72%, dielectric breakdown strength up to 154 kV mm(-1), and energy density up to 270 kJ/m(3), which are three, four, and almost fourty times that of the SBAS free of CEA, respectively. The maximum energy density is over 30 times that of mammalina skeletal muscle while the maximum actuation strain is 3.4 times. Interestingly, the improvement in eletromechanical performance is fulfilled with little increase in glass transition temperature (Tg), mild increase in modulus, and excellent tensile strength due to the microphase structures. The end-block-cured SBAS retains a low Tg of the rubbery phase around -35 degrees C, relatively low viscous loss of 0.2 at room temperature, a modulus lower than 1 MPa, and tensile strength around 3 MPa, which are attractive in terms of DE device applications.

Significantly enhancing electro-actuation performance of dielectric elastomer with ZrO2 nanoparticles

Significantly improved electromechanical performance of dielectric elastomers via alkyl side-chain engineering

Self‐Strengthening Dielectric Elastomer of Triblock Copolymer with Significantly Improved Electromechanical Performance under Low Voltage

Confining Nano-ZrO2 in Nanodomains Leads to Electroactive Artificial Muscle with Large Deformation

Tunable Actuation of Dielectric Elastomer by Electromechanical Loading Rates

Mechanisms of large actuation strain in dielectric elastomers

Spatially Modulus-Patterned dielectric elastomer actuators with oriented electroactuation

Self-healing High-performance Dielectric Elastomer Actuator with Novel Liquid-solid Interpenetrating Structure

Thermoplastic Dielectric Elastomer of Triblock Copolymer with High Electromechanical Performance.

A New Low Moduli Dielectric Elastomer Nano-Structured Composite with High Permittivity Exhibiting Large Actuation Strain Induced by Low Electric Field

Highly Improved Electro-Actuation of Dielectric Elastomers by Molecular Grafting of Azobenzenes to Silicon Rubber

Plasticizer-induced enhanced electromechanical performance of natural rubber dielectric elastomer composites

End-block-curing ABA triblock copolymer towards dielectric elastomers with both high electro-mechanical performance and excellent mechanical properties

Enabling large actuated strain at low electric field by grafting cyanoester dipoles onto a poly(styrene-b-butadiene-b-styrene) elastomer using thiol-ene click chemistry

Composite elastomers with on-demand convertible phase separations achieve large and healable electro-actuation

Enhanced Electromechanical Performance of Natural Rubber Composites Via Constructing Strawberry-like Dielectric Nanoparticles

Mechanics of Dielectric Elastomers: Materials, Structures, and Devices

A Mussel-Like Inspired Modification of BaTiO3 Nanopartciles Using Catechol/polyamine Co-Deposition and Silane Grafting for High-Performance Dielectric Elastomer Composites

Improving actuation strain and breakdown strength of dielectric elastomers using core-shell structured CNT-Al2O3

Low-loss polyacrylate dielectric elastomer with outstanding actuation performance by optimizing crosslinking network

Largely improved actuation strain at low electric field of dielectric elastomer by combining disrupting hydrogen bonds with ionic conductivity