Abstract:Dielectric elastomers (DEs) featured with fast reversible and large deformation excited by an external electric field show promising applications as leading artificial muscle materials in many emerging technologies. It remains a great challenge to synthesize a DE simultaneously with high electromechanical performance (large actuation strain, high energy density, free of pre-stretch and bracing) and excellent mechanical properties (low Tg, low viscous loss, low modulus, and high mechanical strength). Herein, we propose and demonstrate that end-block-curing ABA triblock copolymer elastomer with well-designed structures is a new strategy to address the challenge by taking advantage of the microphase separation nature of the block copolymer. Particularly, poly (styrene-b-butyl acrylate-b-styrene) (SBAS) with post-curable end blocks, i.e. polystyrene (PS) blocks, are designed and synthesized. Different levels of cyclohex-3-enylmethyl acrylate (CEA) that contains two asymmetric vinyl groups with very different reactivity are incorporated into the end blocks for end-block curing while the molecular weight for each block is fixed. It is found that curing the end blocks enhances the strain-hardening effect during stretch and thus significantly increases the electro-mechanical performance. Without pre-stretch, the DE actuator of the end block cured SBAS exhibits a maximum actuation strain up to 72%, dielectric breakdown strength up to 154 kV mm(-1), and energy density up to 270 kJ/m(3), which are three, four, and almost fourty times that of the SBAS free of CEA, respectively. The maximum energy density is over 30 times that of mammalina skeletal muscle while the maximum actuation strain is 3.4 times. Interestingly, the improvement in eletromechanical performance is fulfilled with little increase in glass transition temperature (Tg), mild increase in modulus, and excellent tensile strength due to the microphase structures. The end-block-cured SBAS retains a low Tg of the rubbery phase around -35 degrees C, relatively low viscous loss of 0.2 at room temperature, a modulus lower than 1 MPa, and tensile strength around 3 MPa, which are attractive in terms of DE device applications.

Increasing the breakdown strength of dielectric actuators by using Cu@CuxO/silicone dielectric elastomer

Self‐Strengthening Dielectric Elastomer of Triblock Copolymer with Significantly Improved Electromechanical Performance under Low Voltage

Self-healing High-performance Dielectric Elastomer Actuator with Novel Liquid-solid Interpenetrating Structure

Thermoplastic Dielectric Elastomer of Triblock Copolymer with High Electromechanical Performance.

Modelling and Control of a Dielectric Elastomer Actuator

A New Low Moduli Dielectric Elastomer Nano-Structured Composite with High Permittivity Exhibiting Large Actuation Strain Induced by Low Electric Field

Novel Arrangements For High Performance And Durable Dielectric Elastomer Actuation

Tunable Actuation of Dielectric Elastomer by Electromechanical Loading Rates

Control of Dielectric Elastomer Soft Actuators Using Antagonistic Pairs

Significantly improved electromechanical performance of dielectric elastomers via alkyl side-chain engineering

A dielectric elastomer actuator with a large actuated strain enabled by CaCu3Ti4O12/MXene/silicone dielectric composite

Durable Dielectric Elastomer Actuation

Investigation of the State Transition and Moving Boundary in a Pneumatic–Hydraulic Coupled Dielectric Elastomer Actuator

The Behavior of Dielectric Elastomer Actuators Connected in Series and Parallel

Scar-Like Self-Reinforced and Failure-Tolerant Dielectric Elastomer Actuator with AgNWs Electrode

Improving actuation strain and breakdown strength of dielectric elastomers using core-shell structured CNT-Al2O3

Electrostatic Field Induced Coupling Actuation Mechanism for Dielectric Elastomer Actuators

End-block-curing ABA triblock copolymer towards dielectric elastomers with both high electro-mechanical performance and excellent mechanical properties

Ultra-Compliant Liquid Metal Electrodes with In-Plane Self-Healing Capability for Dielectric Elastomer Actuators

A dual cone actuator with high energy density and long fatigue life by developing a nano-silica reinforced dielectric elastomer composite

Dielectric Elastomers with Large Actuation Strain and High Output Force