Abstract:Decades ago, multi-column GC was developed for separating analytes which cannot be separated with a single column by switching the flow channels and introducing them into multiple columns. Formerly, a channel switching system consisted of stainless-tube-type packed columns and multi-port switching valves which were connected by stainless-steel pipes. These systems utilizing packed columns are still widely used today, mainly for gas analysis, especially for refinery gas analysis and natural gas analysis related to oil refining. However, there have been no new development updates in terms of hardware for decades. Since multi-port switching valves are used, there are problems such as the high frequency of valve replacements due to wear of seals, high running costs as well as long downtimes. In recent years, a heart-cutting multidimensional capillary GC using pressure switching devices such as the Deans switch has been put into practical use. Compared to the switching valves, the pressure switching devices have no wearing parts and are maintenance-free. Multi-dimensional capillary GC using the pressure-switching method cannot be applied to the analysis of low-boiling-point gasses because the retention capacity of the capillary column is low and the column inlet pressure is far from the optimum value for switching. Because of this another related factors, it has not been able to completely replace the traditional methods. In this study, an ON/OFF type silicon pneumatic microvalve was designed and fabricated by semiconductor manufacturing technology, and a flow channel switching module was developed by mounting microvalves on a metallic channel plate which is made by diffusion bonding. The flow channel switching module using silicon pneumatic microvalves has a heat resistance of up to 310 °C, can withstand pressures up to 1.5 MPA or more, and a durability that can withstand over 2 million opening and closing operations. In addition, the reproducibility of the gas sample analysis showed good reproducibility values of RSD 0.1% or less for peak areas and RSD 0.01 to 0.04% for retention time. Flow path switching without the use of pressure switching simplifies method development in several ways. For instance, by incorporating the use of valves that can be opened and closed independently, it was possible to integrate several methods such as heart cut, precut, column switching, and backflushing flow path layouts.

Jet expansion module for liquid-sampled GC-discharge ionization detection of liquefied gases

Innovations in High-Pressure Liquid Injection Technique for Gas Chromatography: Pressurized Liquid Injection System

Development of an automated high-temperature valveless injection system for online gas chromatography

Micro gas chromatography sample injector for the analysis of natural gas

High-Sensitivity Micro-Gas Chromatograph–Photoionization Detector for Trace Vapor Detection

In-Line Dopant Generation for Atmospheric Pressure Ionization Mass Spectrometry

Repetitive liquid injection system for inverse gas chromatography

A Simple and Demountable Capillary Microflow Nebulizer with A Tapered Tip for Inductively Coupled Plasma Mass Spectrometry

A MEMS-enabled portable gas chromatography injection system for trace analysis

Compact, Automated, Inexpensive, and Field-Deployable Vacuum-Outlet Gas Chromatograph for Trace-Concentration Gas-Phase Organic Compounds

A demountable nanoflow nebulizer for sheathless interfacing nano-high performance liquid chromatography with inductively coupled plasma mass spectrometry

A Low-Cost Demountable Direct Injection High-Efficiency Nebulizer for Inductively Coupled Plasma Mass Spectrometry

The applicability of a large-volume injection (LVI) system for quantitative analysis of permanent gases O2 and N2 using a gas chromatograph/barrier discharge ionization detector

Construction and Evaluation of a Low Cost Interface for the Determination of Elemental Speciation by Gas Chromatography Coupled to Inductively Coupled Plasma Mass Spectrometry (GC‐ICP‐MS)

A multifunction flow channel switching module for multi-column capillary gas chromatography using silicon pneumatic microvalves

A miniaturized hydrogen flame ionization detector based on integrated nozzle assembly and embedded sealing structure

Sample introduction in high speed capillary gas chromatography; input band width and detection limits

Liquid sample injection using an atmospheric pressure direct current glow discharge ionization source

Capillary gas chromatographic injection system for large sample volumes

A novel miniaturized flame ionization detector for portable gas chromatography.

Electrically heated, air-cooled thermal modulator and at-column heating for comprehensive two-dimensional gas chromatography