Abstract:Gamma camera is an important apparatus in nuclear medicine imaging. Its detection part is consists of a scintillation detector with a heavy collimator. Substitution of semiconductor detectors instead of scintillator in these cameras has been effectively studied. In this study, it is aimed to introduce a new design of P-N semiconductor detector array for nuclear medicine imaging. A P-N semiconductor detector composed of N-SnO2 :F, and P-NiO:Li, has been introduced through simulating with MCNPX monte carlo codes. Its sensitivity with different factors such as thickness, dimension, and direction of emission photons were investigated. It is then used to configure a new design of an array in one-dimension and study its spatial resolution for nuclear medicine imaging. One-dimension array with 39 detectors was simulated to measure a predefined linear distribution of Tc(99_m) activity and its spatial resolution. The activity distribution was calculated from detector responses through mathematical linear optimization using LINPROG code on MATLAB software. Three different configurations of one-dimension detector array, horizontal, vertical one sided, and vertical double-sided were simulated. In all of these configurations, the energy windows of the photopeak were ± 1%. The results show that the detector response increases with an increase of dimension and thickness of the detector with the highest sensitivity for emission photons 15-30° above the surface. Horizontal configuration array of detectors is not suitable for imaging of line activity sources. The measured activity distribution with vertical configuration array, double-side detectors, has no similarity with emission sources and hence is not suitable for imaging purposes. Measured activity distribution using vertical configuration array, single side detectors has a good similarity with sources. Therefore, it could be introduced as a suitable configuration for nuclear medicine imaging. It has been shown that using semiconductor P-N detectors such as P-NiO:Li, N-SnO2 :F for gamma detection could be possibly applicable for design of a one dimension array configuration with suitable spatial resolution of 2.7 mm for nuclear medicine imaging.

Solid state detectors in nuclear medicine

Cadmium telluride semiconductor detector for improved spatial and energy resolution radioisotopic imaging

Recent Progress in CdTe and CdZnTe Detectors

Study of a new design of p-N semiconductor detector array for nuclear medicine imaging by monte carlo simulation codes

Progresses in the Development of CdZnTe Unipolar Sensing Detector For Medical Imaging

A SIMIND Monte Carlo Simulation Study on CdTe and NaI (Tl) Thickness as Detectors of a Small Animal SPECT System

Development of compact high efficiency microstructured semiconductor neutron detectors

Sensors for Positron Emission Tomography Applications

CdZnTe room-temperature semiconductor operation in liquid scintillator

Recent developments and future trends in nuclear medicine instrumentation.

Novel Electrodes and Engineered Interfaces for Halide-Semiconductor Radiation Detectors

Latest developments in room-temperature semiconductor neutron detectors: Prospects and challenges

[Feasibility study of SPECT quantification using CdTe semiconductor detector]

Role of selenium addition to CdZnTe matrix for room-temperature radiation detector applications

Feasibility of using cadmium-zinc-telluride detectors in electronically collimated SPECT

Physical aspects of detector design

A Study on Determination of an Optimized Detector for Single Photon Emission Computed Tomography

What is Stochastic Independence?

Progress in the Development of CdZnTe Unipolar Detectors for Different Anode Geometries and Data Corrections

Multi-energy Detection Using CdZnTe Semiconductor Detectors