Abstract:This paper demonstrates analytically and experimentally an acoustic levitation motor which has the ability to levitate and rotate an object in the air without mechanical contact. To realize such a device two core methods are applied simultaneously; (i) resonance tracking with an Autoresonance feedback loop, (ii) generation of controlled structural traveling waves. The purpose of the first method is to achieve near-field acoustic levitation, which can levitate an object of a few kilograms. In this research, this is accomplished through high amplitude vibration of an aluminum annulus at ultrasonic frequencies (~30kHz). For high efficiency, the annulus is designed to have a very high Q value, and operating even slightly off resonance ceases levitation. Compounding this is the fact that the natural frequency constantly drifts as ambient conditions and loading change. To accommodate such a drift, and produce stable levitation automatically, a resonance tracking feedback loop is employed here. Simultaneously, the purpose of the second method is to achieve propulsion forces on the levitated object by propagating and controlling traveling waves in the aluminum annulus to create a thin layer of rotating air beneath the levitated body. Even though a single vibration mode can produce only standing waves, an axisymmetric structure possesses two modes per natural frequency, and excitation of a doublet mode pair can generate effective travelling waves. The present paper develops the theory behind the use of the Autoresonance feedback method for achieving constant levitation and propagating travelling waves in co- and counter rotating directions. It will be shown that all this can be accomplished with only single sensor. The result is a stable, repeatable and a highly controllable contactless acoustic levitation motor.

Theoretical and experimental examination of near-field acoustic levitation

Acoustic Radiation Simulation and Pre-Stress Effect on Compact Acoustic Levitation Platform

Study on Transient Properties of Levitated Object in Near-Field Acoustic Levitation

Validation of finite element analysis strategy to investigate acoustic levitation in a two-axis acoustic levitator

Rapid rise of planar object by near-field acoustic levitation on recessed acoustic radiation surface

Inter-Particle Effects with a Large Population in Acoustofluidics

Optical measurement of acoustic radiation pressure of the near-field acoustic levitation through transparent object

Three-dimensional Mid-air Acoustic Manipulation by Ultrasonic Phased Arrays

Enhancing acoustic levitation capacity through array geometry optimization

Direct measurement of forces in air-based acoustic levitation systems

Modelling and closed loop control of near-field acoustically levitated objects

Nonlinear aspects of the acoustic levitation of compressible spheres

Lateral Movement of Particles in a Levitating Acoustic Field

The levitation and driving performance of a contact-free manipulation device actuated by ultrasonic energy

The resonant behavior of airborne standing-wave acoustic levitators based on arrays of ultrasonic transducers

Acoustic levitation of liquid drops: Dynamics, manipulation and phase transitions

Tangential Motion Mechanism and Reverse Hydrodynamic Effects of Acoustic Platform with Nonparallel Squeeze Film

High-resolution localization of rotating acoustic sources: An experimental investigation and axial fan application

Inertial Effect on Gas Squeeze Film for Large Radius Disc Excited by Standing Waves with Complex Modal Shapes

Acoustic radiation force on a free elastic sphere in a viscous fluid: Theory and experiments

Realization of a Contactless Acoustic Levitation Motor via Doublet Mode Control and Autoresonance