Abstract:Herein, a new phase change absorbent N‐aminoethylpiperazine/diethylene glycol dimethyl ether/H2O is developed to absorb carbon dioxide in flue gas. Through a series of experimental operations, the optimal absorption and desorption conditions are found, and the mechanism and renewable energy consumption are studied to determine whether it is suitable for industrial applications. Excessive carbon dioxide (CO2) emissions can lead to environmental problems, and the use of phase change absorbents for CO2 capture has received much attention due to their excellent absorption and desorption properties. Herein, a novel liquid–liquid phase change absorbent consisting of N‐aminoethylpiperazine (AEP), diethylene glycol dimethyl ether (DEGDME), and H2O is utilized. Under the optimal absorption conditions, the absorption capacity is 1.23 mol CO2·mol−1 amine. The rich‐phase viscosity of the AEP/DEGDME/H2O solution is only 6.2 mPa s−1, and the rich phase‐to‐volume ratio is 52.7%, which is suitable for industrial applications. After five cycles of absorption–desorption experiments, the cyclic capacity reaches 0.62 mol CO2·mol−1 amine. However, it should be noted that this leads to an increase in the viscosity of the solution with time. The 13C Nuclear Magnetic Resonance characterization is used to analyze the material distribution and phase separation mechanism, and it is found that during the absorption process, the carbamate and carbonate products generated by the reaction of the amino group in the AEP with CO2 are mainly located in the rich phase, while the DEGDME and H2O mainly remain in the lean phase. In the desorption process, most of the absorbed products are decomposed, and the regeneration efficiency is 66.8%. Through the regeneration energy consumption experiment, when the regeneration efficiency is 56%–67%, the total regeneration energy consumption is 2.71–2.89 GJ t−1 CO2, which is 0.91–1.09 GJ t−1 CO2 lower than that of the regeneration efficiency of 30 wt% MEA solution at 63%, which indicates that this absorbent has certain energy‐saving advantages.

Highly efficient capture of CO2 through the synergy of intramolecular amines within piperazine‐derived alcoholamines

Reducing Aerosol and Ammonia Emission in Post-Combustion CO2 Capture: Additives As Key Solutions

Target-specific Modification of Diethylenetriamine with Hydroxyalkyls: Efficient Absorbents for CO2 Capture

Target-specific modification of diethylenetriamine with hydroxyalkyls: Efficient absorbents for CO 2 capture

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Process Simulation for CO2 Capture with the Aqueous Solution of 1-Methylpiperazine and Its Mixture with Piperazine

Novel Biphasic Solvent of AEP/1-propanol/H2O for CO2 Capture with Efficient Regeneration Performance and Low Energy Consumption

A Pore Matching Amine-Functionalized Strategy for Efficient CO2 Physisorption with Low Energy Penalty

Experimental Studies and Rate-Based Simulations of CO2 Absorption with Aqueous Ammonia and Piperazine Blended Solutions

Research Progress on Amine Absorbent for CO2 Capture from Flue Gas

Simulation and Performance Comparison for CO2 Capture by Aqueous Solvents of N-(2-Hydroxyethyl) Piperazine and Another Five Single Amines

Atom-level interaction design between amines and support for achieving efficient and stable CO2 capture

Experimental study on the performance of a highly efficient NE‐1 absorbent for CO2 capture

A general Energy-Efficient strategy for optimizing CO 2 Capture: Designing and harnessing the rapid adsorption kinetics of Amine-Impregnated adsorbents

Study on performance of alkanolamines as absorbents for CO2 capture

CO2 Capture Using Piperazine-Promoted, Aqueous Ammonia Solution: Rate-based Modelling and Process Simulation

Development of composite amine functionalized polyester microspheres for efficient CO2 capture

A Novel Phase Change Absorbent for CO2 Capture with Low Viscosity and Effective Absorption–Desorption Properties

Recent Progress on CO 2 Capture Based on Sterically Hindered Amines: A Review

Research Progress of Aqueous Amine Solution for CO2 Capture: A Review

Sponges with covalently tethered amines for high-efficiency carbon capture