Abstract:Safety and efficient dispose of municipal solid waste incineration (MSWI) fly ash with high toxicity has emerged as a worldwide challenge. Vitrification provides the advantages of capacity reduction, detoxification, and solidification of heavy metals, which has the potential to dispose of hazardous waste on a large scale. Herein, co-vitrification of MSWI fly ash and bottom slag has been accomplished based on the characteristics of calcium and silicon composition. A novel approach for producing glass ceramic foams by alkaline activation-crystallization was developed to realize the disposal of the obtained glass. The effect of MSWI fly ash/bottom slag ratios on the glass network, crystallization ability of the basic glass, pore structure, and physical properties of the porous green body was investigated. The results revealed that with increasing MSWI fly ash proportion, the Si-O of [SiO4] in the basic glass changed significantly and the crystallization ability steadily reduced. Si-O and Al-O in basic glass are easy to corrode under alkaline conditions, releasing Ca2+ and forming a low solubility product, calcium silicate hydrate. When the crystallization temperature increases from 950 ℃ to 1150 ℃, it is more conducive to the precipitation of the gehlenite phase. Extending the crystallization time promotes three-dimensional growth of crystals that are coupled with each other to form a network structure and a multi-stage pore structure. The pore structure was developed with the help of NH3 and H2 generated by the secondary aluminum ash (SAA). Through the preparation of glass ceramic foams, the raw materials were detoxified. The toxic heavy metals showed extremely low leaching concentrations, which were smaller than the limit of TCLP. The prepared samples had 70.22-80.61% of porosity, 0.78-1.19 g/cm3 of low bulk density, and 0.54-7.86 MPa of compressive strength.

Barium slag processing system and method

Efficient separation and recovery of barium from barium slag via hydrometallurgical approach: Process design, thermodynamics research and mechanism investigation

Efficient Stabilization of Barium- and Gypsum-Bearing Tailings by One-Step Dry Ball Milling-an Ingenious Inspiration

High-performance aerated concrete building material utilizing barium slag and preparation method thereof

Conversion of barium sulfate into barium carbonate in rare earth acid insoluble slag using low-temperature roasting with sodium hydroxide

Composition modification and plasma vitrification of bottom ash from industrial hazardous waste incineration

Comprehensive utilization and safe disposal of hazardous arsenic-alkali slag by the combination of beneficiation and metallurgy

SULFUR CAPTURE MECHANISM AND APPLICATION OF NOVEL BARIUM-BASED SORBENTS AT HIGH TEMPERATURE

Study on the capacity of high-temperature melting technology to treat coal gasification fine slag and characterization of slag obtained

A novel synergistic method on potential green and high value-added utilization of blast furnace slag

Co-vitrification of municipal solid waste incinerator fly ash and bottom slag: Glass detoxifying characteristics and porous reformation

Converting ash into reusable slag at lower carbon footprint: Vitrification of incineration bottom ash in MSW-fueled demonstration-scale slagging gasifier

Comprehensive Utilization of Carbide Slag

Non-hazardous Treatment for Barium Slag Using Phosphogypsum

Synergetic valorization of basic oxygen furnace slag and stone coal: Metal recovery and preparation of glass-ceramics

A new separation flowsheet for resources recovery from waste coal gasification fine slag black water and its benefits analysis

Thermodynamic Phase Conversion Mechanism on Copper–Cobalt Slag Cleaning Process Using Gypsum Wastes as Sulfurizing Agent

The viscosity, crystallization behavior and glass-ceramics preparation of blast furnace slag: A review

Processing of copper converter slag for metal reclamation. Part I: Extraction and recovery of copper and cobalt

Minimization and stabilization of smelting arsenic-containing hazardous wastewater and solid waste using strategy for stepwise phase-controlled and thermal-doped copper slags

Calcium Recovery from Waste Carbide Slag Via Ammonium Sulfate Leaching System