Abstract:The power conversion efficiency of perovskite solar cells (PSCs) has increased dramatically over the past decade, reaching more than 26%. With such high efficiency, PSCs could become one of the most important commercial alternatives to silicon‐based solar cells in the near future. However, the inconsistency of PSC operation over time is the key issue restricting its commercial application. One of the most common means of improving the overall stability of PSCs is the introduction of additives with specific functional groups to extend their useful life. Here we compare the performance and stability of MAPbI3‐based PSCs with additions of either benzoic acid (0F‐B), fluorinated benzoic acids (4‐fluorobenzoic acid (1F‐B), or 2,3,4,5,6‐pentafluorobenzoic acid (5F‐B)) in the perovskite active layer. These additives, upon interacting with the perovskite precursors, chelate onto lead ions and form hydrogen bond with methyl ammonium ions. These combined interactions result in an increased activation energy for nucleation of perovskite crystals, thereby, increased crystal size, reduced defect formation, improved electronic properties, as well as reduced ion migration. As a result, PSCs added with largest fluorine substitution of 5F‐B achieve the highest efficiency of 20.50% with a narrow PCE distribution compared to that of PSC devices added with 1F‐B (19.25%), 0F‐B (18.80%) and pristine devices (18.53%). Notably, 5F‐B added PSCs retain 80% of their initial PCE after ∽100 days humidity test (at 25 °C and 50 RH%), 30 days thermal stability test (at 85 °C in nitrogen environment), and 12 days light illumination test (continuous simulated solar radiation). Therefore, 5F‐B added PSCs synergistically achieve the highest performance and remain very stable under constant heat, humidity, or light illumination conditions for sustained energy‐harvesting applications in the future. TOC: This study focuses on the impacts of benzoic acid and its fluorinated derivatives functioning as effective passivation additives for methyl ammonium lead iodide (MAPbI3) perovskite solar cells. These additives synergistically passivate the perovskite layer, resulting in improved crystallinity and surface morphology, leading to an increased efficiency. Moreover, this approach enhances the long‐term stability of the architected solar cells, rendering them more suitable for future commercial applications. This article is protected by copyright. All rights reserved.

Efficient Inverted Perovskite Solar Cells Using Dual Fluorinated Additive Modification

Defect Passivation in CH3NH3PbI3 Films Using Alkali Metal Fluoride Additives for Highly Efficient Perovskite Solar Cells

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Dual‐Interface Modification for Inverted Methylammonium‐Free Perovskite Solar Cells of 25.35% Efficiency with Balanced Crystallization

Self‐Induced Bi‐interfacial Modification via Fluoropyridinic Acid For High‐Performance Inverted Perovskite Solar Cells

Synergistic Enhancement of Stability and Performance for Perovskite Solar Cells Using Fluorinated Benzoic Acids as Additives

Improving the Performance of Perovskite Solar Cells via a Novel Additive of N ,1‐Fluoroformamidinium Iodide with Electron‐Withdrawing Fluorine Group

Synergistic Effect of Fluorinated Passivator and Hole Transport Dopant Enables Stable Perovskite Solar Cells with an Efficiency Near 24%

Synergistic Passivation With Phenylpropylammonium Bromide for Efficient Inverted Perovskite Solar Cells

Reduction of Bulk and Surface Defects in Inverted Methylammonium- and Bromide-Free Formamidinium Perovskite Solar Cells

Bridging the Interfacial Contact for Improved Stability and Efficiency of Inverted Perovskite Solar Cells

Enhanced Efficiency and Stability of Inverted CsPbI2Br Perovskite Solar Cells Via Fluorinated Organic Ammonium Salt Surface Passivation.

Efficient and Stable Inverted Perovskite Solar Cells Enabled by Inhibiting Voids Via a Green Additive.

Interface Modification for Efficient and Stable Inverted Inorganic Perovskite Solar Cells

Enhanced Efficiency and Stability for the Inverted High‐Bandgap Perovskite Solar Cell via Bottom Passivation Strategy

Judicious Fluorination of Perovskite Quantum Wells Enables Over 25% Efficiency in Inverted Solar Cells

Phosphonate Diacid Molecule Induced Crystallization Manipulation and Defect Passivation for High‐Performance Inverted MA‐Free Perovskite Solar Cells

Regulating the Crystallization of FAPbI3‐Based Perovskite with a Furan Substituted Ethylammonium Additive for Achieving Highly Efficient Solar Cells

Enhanced Photovoltaic Performance of Perovskite Solar Cells Using Polymer P(VDF-TrFE) As a Processed Additive

Fluorinated Oligomer Wrapped Perovskite Crystals for Inverted MAPbI 3 Solar Cells with 21% Efficiency and Enhanced Stability

Double-functional additive strategy for efficient perovskite solar cells