Abstract:Iron ore pellet reduction experiments were performed with pure hydrogen (H2) and mixtures with carbon monoxide (CO) at different ratios. For direct reduction processes that switch dynamically between reformed natural gas and hydrogen as the reductant, it is important to understand the effects of the transition on the oxide reduction kinetics to optimize the residence time of iron ore pellets in a shaft reactor. Hence, the reduction rates were studied by varying experimental parameters such as the temperature (800, 850 & 900 °C), reactant gas flow rate (100, 150 & 200 cm3/min), pellet size and composition of the reactant gas mixture. The rate of reduction was observed to increase with an increase in temperature and reactant gas flow rate, but it decreased with an increase in pellet size. SEM greyscale analysis was performed to analyze the porosity and phase composition of partially reduced pellets. The porosity of the pellets was observed to increase from 0.3 for unreacted pellet to 0.42 for a completely reduced pellet. Energy-dispersive X-ray spectroscopy (EDAX) analysis was performed to identify the phases observed in the SEM images. The fraction of iron phase was observed to increase from the shell region of the pellet to the core region with an increase in the degree of reduction. A 2D-axisymmetric numerical model was developed on COMSOL Multiphysics, and it was validated using the conversion (X) vs. time curves obtained from each experiment. The model was able to accurately predict the total time needed for the complete conversion of a single iron ore pellet for multiple experiments. Effects of changes in the porosity and tortuosity of the pellet on the model were also studied and the rate of reduction was observed to be sensitive to changes in both porosity and tortuosity. The SEM analysis and the model results show that tortuosity is higher for pellets reduced with H2 than for pellets reduced with H2-CO gas mixtures.

Reduction and Desulphurization of Chromium Ore Pellet Containing Carbonaceous Material in the Flowing Atmosphere of H2-CO

Reduction and Carbonaceous Desulphurization of Chromium Ore Material in the Flowing Atmosphere Pellet Containing of H 2 CO *

Hydrogen-based pre-reduction of chromite: Reduction and consolidation mechanisms

Direct reduction of iron ore pellets by H 2 -CO mixture: An in-situ investigation of the evolution and dynamics of swelling

Reduction Process of Cr_2O_3 / Carbon Pellets

Experimental and Modeling Study on Reduction and Heat Transfer Characteristics of Single Iron Ore Pellet in H<sub>2</sub>/CO Atmospheres

Kinetic Analysis of Isothermal and Non-Isothermal Reduction of Iron Ore Fines in Hydrogen Atmosphere

Reduction kinetics of iron oxide pellets with H2 and CO mixtures

Modeling Isothermal Reduction of Iron Ore Pellet Using Finite Element Analysis Method: Experiments & Validation

Reduction Kinetics of Oxidized New Zealand Ironsand Pellets in H2 at Temperatures up to 1443 K

Reduction Kinetics of Fine Hematite Ore Particles with a High Temperature Drop Tube Furnace

Study on the reduction of Fe2O3 pellets by CO-CO2 and H2-H2O: Reaction kinetics and pore network model

Reduction of Iron‐Ore Pellets Using Different Gas Mixtures and Temperatures

Thermodynamic evaluation for reduction of iron oxide ore particles in a high temperature drop tube furnace

Investigation of (H2–H2O) partial pressure on the gas-based reduction of fine iron ore in mixed gases (H2–H2O–CO–CO2–N2)

Investigation of reduction behavior of various iron ores in a hydrogen-rich reducing atmosphere

Direct Reduction of Iron Ore Pellets by Using CO/CO2 and CO Gases

Kinetics of Carbothermic Reduction of Synthetic Chromite

Results of Hydrogen Reduction of Iron Ore Pellets at Different Temperatures

Kinetics of solid-state reduction of chromite overburden