Abstract:This study explores the turbulent flow-induced whistling phenomena in a channel with corrugated wall surfaces, which is crucial for mitigating the acoustic fatigue problem in the aerospace field. By solving a compressible linearized Navier–Stokes equation in the frequency domain, the interference between the turbulent flow field along the corrugated wall and the incident acoustic field is studied, including the acoustic wave scattering phenomenon caused by turbulence and the fluid perturbation induced by acoustic waves. In conjunction with this, the acoustic two-ports method is utilized to investigate the transfer-function model and predict the whistling potentiality of the turbulent flow along corrugated walls. Experimental validations through the literature results confirm the numerical accuracy of this aeroacoustic simulation strategy. Subsequently, the investigation extends to different cavity configurations with different cavity profiles and numbers, and the two-port scattering matrix is applied to quantify the acoustic transmission and damping coefficients caused by the background flow field and turbulent eddy viscosity. The acoustic power conversion mechanism between the turbulent flow field and the incident acoustic field is established, allowing for quick prediction and effective analysis of the generation frequency range of the whistling phenomenon. Furthermore, the modulation effect of sound waves on the fluid is studied by analyzing the response of the incident sound wave frequency to the phase interference momentum and shear layer of different configurations of corrugated cavities. The results show that compared with the right-edge configuration, the rounded-edge configuration produces whistling at a lower frequency due to the turbulence effect, and the number of cavities adjusts the intensity, not the frequency, of the sound power generated. In addition, the oscillation of the shear layer caused by sound waves is related to the cavity configuration and the sound wave frequency.

Frequency modulation of an aerodynamic whistle-based bat deterrent

Novel ultrasonic bat deterrents based on aerodynamic whistles

A passive, blade-mounted ultrasonic bat deterrent for wind turbines

Amplitude modulation of wind turbine noise

Enhancing the Vortex Whistle for Measures of Respiratory Capacity Via Computational Fluid Dynamics and Computational Aero-Acoustic Analysis

Mechanism and scaling of wing tone generation in mosquitoes

The Nonlinear Evolution of Whistler-Mode Chorus Revisited: Modulation Instability as the Source of Tones

Adaptive Weighted Envelope Spectrum: A Robust Spectral Quantity for Passive Acoustic Detection of Underwater Propeller Based on Spectral Coherence

Numerical prediction of the whistling potentiality of a turbulent channel flow with corrugated walls

Frequency shifts during whistling occurs as transition between two phase synchronised limit cycles via a state of intermittency or abruptly

Low-frequency fluctuations and their suppression in the 5.5 m × 4 m aeroacoustic wind tunnel at CARDC

A high-intensity low-frequency acoustic generator based on the Helmholtz resonator and airflow modulator

Acoustic-based whistle detection of drain hole for wind turbine blade

Low-Frequency Intensity Modulation of High-Frequency Rotor Noise

Time-frequency modulation based mimicking dolphin whistle for covert underwater acoustic communication

Matched power-frequency-modulated signal transform and its application in bat call signal analysis

Flexural wave modulation and mitigation in airfoils using acoustic black holes

Biologically inspired covert underwater acoustic communication by mimicking dolphin whistles

Quantification of Flow Noise Produced by an Oscillating Foil

Propeller–strut interaction tone noise

Theoretical research on the application of impedance calculation in the design of high-intensity low-frequency acoustic generator