Abstract:The proton exchange membrane (PEM) fuel cell is considered to be one of the most promising alternative clean power generators for portable, mobile and stationary applications because of its low to zero emissions, low-temperature operation, high power density and fast start-up.Fuel (humidified hydrogen) and oxidant (humidified air) are fed into the cathode and anode, respectively. The water vapor in the cell introduced by humidification and produced by the cathode electrochemical reaction will condense to liquid water when the partial pressure of the vapor exceeds its saturation pressure. The resulting two-phase transport of water significantly affects the transport of reactants to the porous electrode and the membrane ohmic resistance, and then the cell performance. For example, liquid water accumulating in the channels and in the pores of the gas diffusion layer (GDL) increases the transport resistance of oxygen to the catalyst layer (CL), even resulting in cathode flooding at high current densities. In addition, the membrane must remain well-hydrated because the proton transport capability in the membrane is proportional to the membrane water content. Therefore, understanding and control of the water transport in the cell are important for improving cell performance. At present, the local distributions and transport of reactants in the cell are difficult to measure due to the small cell sizes; thus, numerical models (including the two-phase transport) have become an important means for understanding the reactant transport, electrochemical reactions, current density distributions, and cell performance.This work presents a complete three-dimensional, two-phase transport model for a PEM fuel cell based on the two-fluid method, in which the two-phase flow of the multi-component reactants and liquid water are coupled with the species transport, electrochemical reactions, proton and electron transport, electro-osmosis and back diffusion of water. Different two liquid water transport equations were developed for the various cell units based on the different liquid water transport mechanisms in the fuel cell. The model is used to investigate the effects of the various flow field designs in the bipolar plates on the cell performance. The improved understanding of the two-phase transport is then used to develop a series of new flow field designs, including the tapered flow field, contracted flow field, and partially blocked or blocked flow fields. The predictions show that the improved flow field designs significantly increase the liquid water removal from the GDL, which enhances the reactant transport rates and improves cell performance.

Development Status of Flow Field Design for Bipolar Plates in Hydrogen Fuel Cells

Bipolar Plate Flow Field Structure Research Status and Trends for Hydrogen Fuel Cell Vehicles

Design and Modelling of 3D Bionic Cathode Flow Field for Proton Exchange Membrane Fuel Cell

Optimization Scheme of Bipolar Plate for Hydrogen Fuel Cell

Modeling, design, materials and fabrication of bipolar plates for proton exchange membrane fuel cell: A review

Review of Flow Field Designs for Polymer Electrolyte Membrane Fuel Cells

Effect of bipolar-plates design on corrosion, mass and heat transfer in proton-exchange membrane fuel cells and water electrolyzers: A review

A novel intersectant flow field of metal bipolar plate for proton exchange membrane fuel cell

AI-Assisted Flow Field Design for Proton Exchange Membrane Fuel Cells: Progress and Perspective

Performance study on a stepped flow field design for bipolar plate in PEMFC

Experimental Investigation on the Anode Flow Field Design for an Air-Cooled Open-Cathode Proton Exchange Membrane Fuel Cell

Research Progress and Prospects of Bipolar Plate Materials for Proton Exchange Membrane Fuel Cells

Testing Study of Different Flow Direction and Structure for Air-Cooled Proton Exchange Membrane Fuel Cell

Current status of research on composite bipolar plates for proton exchange membrane fuel cells (PEMFCs): nanofillers and structure optimization

Effect of Bipolar Plate Material on Proton Exchange Membrane Fuel Cell Performance

Porous Flow Field for Next-Generation Proton Exchange Membrane Fuel Cells: Materials, Characterization, Design, and Challenges

Numerical Analysis of Parallel Flow Fields Improved by Micro-Distributor in Proton Exchange Membrane Fuel Cells

Flow flied inspired by sieve plate structure of plant leaf veins for proton exchange membrane fuel cells

Two-Phase Model Of Pem Fuel Cells For Optimal Flow Field Design Of Bipolar Plates

Polymer electrolyte membrane fuel cell flow field designs and approaches for performance enhancement

Reinforcement of proton‐exchange membrane fuel cell performance through a novel flow field design with auxiliary channels and a hole array