Abstract:Alkaline water electrolysis has been operated on 100+ MW scale in the 20 th century powered by hydropower. Because of this history, the technology is often regarded as a mature technology with limited improvement potential that is less suitable for flexible operation. As a result most research efforts in the field of water electrolysis focus on other technologies such as PEM, solid oxide and AEM electrolysis. This is a pity, since alkaline electrolysis is very well positioned to be deployed on large-scale for the production of green hydrogen in the coming decades. Main reason is that in contrast to the other technologies, alkaline technology does not depend on scarce and/or expensive noble or rare earth metals. Also, the use of a diaphragm instead of a membrane makes the technology more robust. Yet, to enable the large-scale deployment of alkaline electrolysis for production of green hydrogen from renewable electricity certain technical challenges need to be overcome. These include safety challenges associated with rare scenarios where hydrogen and oxygen can mix, flexibility limitations associated with gas crossover limiting the minimum load of the plant, and durability challenges resulting from frequent shutdowns of electrolyzers. In principle all these challenges can be overcome by rigorous plant design and the selection of suitable diaphragm and electrode materials, but they do require research efforts. Next to that, there is room to significantly drive down the costs of green hydrogen produced by alkaline electrolyzers. Traditionally, alkaline electrolyzers have been operated at low current densities of 0.2-0.4 A cm -2 . This was related to the high ohmic drop associated with the use of thick diaphragms and non-zero-gap cell designs. Presently, advanced alkaline electrolyzers are under development that can operate at significantly higher current densities (~1 A cm -2 ) through the use of thinner diaphragms, zero-gap cell designs and improved electrode materials. Operation at these increased current densities increases the output of alkaline electrolyzers and in this way can effectively reduce the costs and footprint of water electrolysis plants. Yet, the use of thinner diaphragms and advanced electrodes also creates new challenges, since they can lead to increased gas crossover and vulnerability to impurities and reverse currents that occur upon the shutdown of electrolyzers. In this presentation the fundamentals of alkaline water electrolysis will be discussed. These include overpotentials and durability of electrode coatings, the role of electrolyte impurities, ohmic resistance, gas crossover through the diaphragm, the influence of operating temperature and pressure, the effect of bubbles, and the influence stray currents resulting from the manifold design. These fundamentals will be translated into a potential design for the perfect alkaline electrolyzer. Figure:alkaline electrolyzers operational in Norway in 1931. Source: Norsk Industriarbeidermuseum Figure 1

Energy Efficiency of Steady DC and Half Sine Pulsed DC in the High Voltage Pre-Plasma and Plasma Alkaline Water Electrolysis

Optimizing Energy Efficiency for Industrial Application of Pulsed Corona Gas Cleaning Techniques

The electro-acoustic transition process of pulsed corona discharge in conductive water

Optimum pulse electrolysis for efficiency enhancement of hydrogen production by alkaline water electrolyzers

Effect of pulse potential on alkaline water electrolysis performance

An Energy-Based Analysis of High Voltage Resonant-Based Pulsed Low Power Converter for Water Treatment Application

Experimental study of alkaline water electrolyzer performance and frequency behavior under high frequency dynamic operation

Application of Pulsed Electrochemistry to Enhanced Water Decontamination

(Invited) A Critical Review on the Expressions of Energy Efficiency Used in Low Temperature Water Electrolysis

Atmospheric Pressure Pulsed Modulated Arc Discharge Plasma

DC Discharges with a Porous Liquid Anode: Increasing Refrigerant Efficiency for Flash Evaporation Cooling with Charged Particle Kinetics

First pulsed control system design for enhanced hydrogen production performance in proton exchange membrane water electrolyzers

Effect of Electrical Parameters on Energy Yield of Organic Pollutant Degradation in a Dielectric Barrier Discharge Reactor

Investigation of Pulsed Dielectric Barrier Discharge System on Water Treatment by Liquid Droplets in Air

Pulsed Dynamic Electrolysis Enhanced PEMWE Hydrogen Production: Revealing the Effects of Pulsed Electric Fields on Protons Mass Transport and Hydrogen Bubble Escape

(Invited) Challenges and Opportunities of Alkaline Water Electrolysis

Electrically Efficient Production of a Diffuse Nonthermal Atmospheric Plasma

A review of pulse electrolysis for efficient energy conversion and chemical production

High‐Rate Alkaline Water Electrolysis at Industrially Relevant Conditions Enabled by Superaerophobic Electrode Assembly

Effect of Operating Parameters on Performance of Alkaline Water Electrolysis

Proton exchange membrane-like alkaline water electrolysis using flow-engineered three-dimensional electrodes