Abstract:Alkaline water electrolysis has been operated on 100+ MW scale in the 20 th century powered by hydropower. Because of this history, the technology is often regarded as a mature technology with limited improvement potential that is less suitable for flexible operation. As a result most research efforts in the field of water electrolysis focus on other technologies such as PEM, solid oxide and AEM electrolysis. This is a pity, since alkaline electrolysis is very well positioned to be deployed on large-scale for the production of green hydrogen in the coming decades. Main reason is that in contrast to the other technologies, alkaline technology does not depend on scarce and/or expensive noble or rare earth metals. Also, the use of a diaphragm instead of a membrane makes the technology more robust. Yet, to enable the large-scale deployment of alkaline electrolysis for production of green hydrogen from renewable electricity certain technical challenges need to be overcome. These include safety challenges associated with rare scenarios where hydrogen and oxygen can mix, flexibility limitations associated with gas crossover limiting the minimum load of the plant, and durability challenges resulting from frequent shutdowns of electrolyzers. In principle all these challenges can be overcome by rigorous plant design and the selection of suitable diaphragm and electrode materials, but they do require research efforts. Next to that, there is room to significantly drive down the costs of green hydrogen produced by alkaline electrolyzers. Traditionally, alkaline electrolyzers have been operated at low current densities of 0.2-0.4 A cm -2 . This was related to the high ohmic drop associated with the use of thick diaphragms and non-zero-gap cell designs. Presently, advanced alkaline electrolyzers are under development that can operate at significantly higher current densities (~1 A cm -2 ) through the use of thinner diaphragms, zero-gap cell designs and improved electrode materials. Operation at these increased current densities increases the output of alkaline electrolyzers and in this way can effectively reduce the costs and footprint of water electrolysis plants. Yet, the use of thinner diaphragms and advanced electrodes also creates new challenges, since they can lead to increased gas crossover and vulnerability to impurities and reverse currents that occur upon the shutdown of electrolyzers. In this presentation the fundamentals of alkaline water electrolysis will be discussed. These include overpotentials and durability of electrode coatings, the role of electrolyte impurities, ohmic resistance, gas crossover through the diaphragm, the influence of operating temperature and pressure, the effect of bubbles, and the influence stray currents resulting from the manifold design. These fundamentals will be translated into a potential design for the perfect alkaline electrolyzer. Figure:alkaline electrolyzers operational in Norway in 1931. Source: Norsk Industriarbeidermuseum Figure 1

Effect of Operating Parameters on Performance of Alkaline Water Electrolysis

Performance Evolution of Typical Electrocatalysts with Electrolyte Temperature During Alkaline Water Electrolysis

Study the Effect of Lye Flow Rate, Temperature, System Pressure and Different Current Density on Energy Consumption in Catalyst Test and 500W Commercial Alkaline Water Electrolysis

Non-Precious Electrodes for Practical Alkaline Water Electrolysis

Effects of foam cathode electrode structure on alkaline water electrolysis for hydrogen production

Effect of pulse potential on alkaline water electrolysis performance

Mathematical Modeling and Experimental Validation for a 50 Kw Alkaline Water Electrolyzer

The Optimization of a Physical Factor of Hydrogen Production in Alkaline Water Electrolysis

Optimizing Alkaline Water Electrolysis: A Dual-Model Approach for Enhanced Hydrogen Production Efficiency

Experimental Studies on Dynamic Performance of 250kw Alkaline Electrolytic System

Parametric Modelling and Optimization of Alkaline Electrolyzer for the Production of Green Hydrogen

Polymer anion-selective membrane for electrolytic water splitting: The impact of a liquid electrolyte composition on the process parameters and long-term stability

Understanding Performance Limitation of Liquid Alkaline Water Electrolyzers

Analysis of the Effect of Characteristic Parameters and Operating Conditions on Exergy Efficiency of Alkaline Water Electrolyzer

Numerical modeling and analysis of the effect of pressure on the performance of an alkaline water electrolysis system

Determining the change in performance from replacing a separator with an anion exchange membrane for alkaline water electrolysis

Dynamic Simulation and Performance Analysis of Alkaline Water Electrolyzers for Renewable Energy-Powered Hydrogen Production

Optimum pulse electrolysis for efficiency enhancement of hydrogen production by alkaline water electrolyzers

(Invited) Challenges and Opportunities of Alkaline Water Electrolysis

Investigation of the operation characteristics and optimization of an alkaline water electrolysis system at high temperature and a high current density

Effect of electrode spacing on hydrogen production using a home-made alkaline electrolyzer