Abstract:Cement industry is estimated to account for ~6–7% of anthropogenic CO 2 emissions globally. Therefore, the identification of innovative solutions for their mitigation is both a priority and a challenge. The integration of carbon capture and storage technologies into the industrial production process is considered among the most viable solutions for this purpose, and calcium looping (CaL) represents one of the most promising. A key research challenge points to maximize process efficiencies and minimize production cost to decouple cement production from carbon emissions. The carbon capture process proposed in this work is a looping system where CO 2 is absorbed by calcium oxide (CaO) in the first reactor (carbonator) and the calcium carbonate (CaCO 3 ) produced is regenerated in an oxy-fired calciner. During calcination, CO 2 is released from the sorbents, purified, compressed, and then made available for geological storage. In this study, greenhouse gas (GHG) emissions related to two cement production systems with CaL carbon capture are evaluated: the tail-end CaL carbon capture and the integrated CaL carbon capture. The carbon footprint is complemented with the assessment of the resources depletion mineral and elements and the demand of primary energy. An eco-design approach was pursued by carrying out a life cycle assessment to identify the environmental hotspots and which CaL integration approach presents a higher potential for cement industry decarbonization. The results of the analysis were compared with a conventional cement production process. The results show that the GHG emissions may be reduced by 74% with a tail-end approach and 71% when the CaL is fully integrated into the cement production process. When a future perspective, with higher penetration of renewable energy resources into the electricity sector, was modeled, the results showed that CaL integrated into the clinker production process is more promising in terms of reduction of the carbon footprint, rather than the tail-end solutions. Primary energy consumption from non-renewables is substantially impacted by CaL, with the integrated CaL configuration showing to be a more efficient solution because of less primary energy consumption (coal).

Carbon footprint and techno-economic analysis to decarbonize the production of linerboard via fuel switching in the lime kiln and boiler: Development of a marginal abatement cost curve

Integration of carbon capture in a pulp mill—effect of strategic development towards better biomass resource utilization

Environmental and economic analysis of the transformation of paper mill sludge treatment technologies in China

The Role of Low-Carbon Fuels and Carbon Capture in Decarbonizing the U.S. Clinker Manufacturing for Cement Production: CO2 Emissions Reduction Potentials

Substitution of coke with pelletized biocarbon in the European and Chinese steel industries: An LCA analysis

Inorganic Chemistry during Pyrolysis, Gasification, and Oxyfuel Combustion of Kraft Pulping Black Liquor

Carbon emissions analysis of the pulp molding industry: a comparison of dry-press and wet-press production processes

Analysis of emission reduction strategies for power boilers in the US pulp and paper industry

Mixed-Framework-Based Energy Optimization of Chemi-Mechanical Pulping

Uncovering Energy Use, Carbon Emissions and Environmental Burdens of Pulp and Paper Industry: A Systematic Review and Meta-Analysis

Woody biomass waste derivatives in decarbonised blast furnace ironmaking process

Assessment of fuel switching as a decarbonization strategy in the cement sector

Multi-Case Study on Environmental and Economic Benefits through Co-Burning Refuse-Derived Fuels and Sewage Sludge in Cement Industry

A Thermodynamic View on the In-situ Carbon Dioxide Reduction by Biomass-derived Hydrogen during Calcium Carbonate Decomposition

Integrated control of emission reductions, energy-saving, and cost-benefit using a multi-objective optimization technique in the pulp and paper industry.

Decarbonizing the Fertilizers Sector: An Alternative Pathway for Urea and Nitric Acid Production

Energy and exergy diagnostics of an industrial annular shaft limekiln working with producer gas as renewable biofuel

Evaluating the Carbon Footprint of Cement Plants Integrated With the Calcium Looping CO2 Capture Process

Innovations in papermaking: an LCA of printing and writing paper from conventional and high yield pulp

Integrated torrefaction-extrusion system for solid fuel pellet production from mixed fiber-plastic wastes: Techno-economic analysis and life cycle assessment

Biomass–Coal Hybrid Fuel: A Route to Net-Zero Iron Ore Sintering