Abstract:Having summarized the calculation methods of electric field and the actualities of the research on the calculation of electric field and design of grading rings at home and aboard, this paper combines the finite element method and charge simulation method nicely in order to calculate the electric field and potential distribution along composite insulators as well as design the grading rings for the 800kV UHVDC transmission lines according to the features of composite insulator and the domain decomposition method.The three-dimensional (3D) model of 800kV two polar DC transmission lines with tower configuration and the simplified two-dimensional (2D) model are established by using ANSYS 8.0 and ANSOFT software. The electric field and potential distribution along composite insulator without any grading ring is calculated, which is rather too uneven in the case of running under 800kV UHVDC transmission lines. The potential distribution along composite insulator of 800kV UHVDC transmission line and lower voltage class is contrasted for the further study on the relationship between the nonlinearity of the electric field and potential distribution along composite insulator and the length of the composite insulator. The result shows that the higher the voltage class is, the more uneven the electric field and potential distribution along composite insulator will be.A method to optimize the location and the configuration parameters of the grading ring is presented; the aim of the optimization is the limitation of the maximal electric field around the metal fitting and the grading ring, while the variables are the configuration parameters of the grading ring. If the result of the 3D model is lower than the set electric field intensity, the approving parameters of the grading ring is gained. Finally, the optimized parameters of the grading ring are verified in the 3D model, the result indicates that the maximal electric field around the sheath, metal fitting and the grading ring is controlled to be acceptable, and the optimized grading ring can meet the needs of the ±800kV UHVDC power transmission project.

Finite element simulation of electric field of new T-junction tower for transmission line

Electric Field Computation and Optimization of Composite Tower in 330 Kv Double Circuit Transmission Lines

Electric Field Distribution Calculation and Analysis of Composite Insulators Operating on Double Circuit Transposition Tower in 500kv Transmission Lines

Calculation of Electric Field Distribution along Composite Insulator Strings and Design of Grading Ring of UHVDC Transmission Line

Electric Field Computation and Corona Test for Composite Cross-Arms in 750kV Cup Type Tower

Test and Simulation Analysis on the Electric Field Distribution Characteristics of UHVAC Composite Cross-arm Fittings

Numerical Analysis of Electric-Field Distribution Around Composite Insulator and Head of Transmission Tower

Research on the Electromagnetic Environment of 220 Kv Four Circuits on One Tower Transmission Line

Simulated Calculation and Analysis of Lightning Performance of UHV A.C. Transmission Line

Simulation and Design of Electric Field Distribution for the Incoming Conductor Between 330 Kv Terminal Tower and 750 Kv Substation

A Finite Element Method for the Calculation of the Electric Field and Potential Distribution along the 330 Kv Line Composite Insulators

Optimization Design for 500 kV Four-Circuit Transmission Lines on Same Tower

Research on transient response of tower-line system under wind field based on finite element simulation

Electric field distribution calculation and analysis on the surface of jumper on double circuit transposition tower in UHV AC transmission lines

Calculation and Analysis on Induced Voltage and Current of 1 000 Kv Transmission Line Adopting Structure of Double Circuit on the Same Tower

Optimal analysis of electric field characteristics for live working on straight-line tower of ±1100kV DC transmission line

Finite Element Analysis of the Electric Fields on Suspension Insulator Strings at 500kV Power Transmission Towers

Electric-Field Calculation for Hot-line Working on the Head of Transmission Tower

Electric Field and Electromagnetic Environment Analyses of a 500 Kv Composite Cross Arm

Design Of Grading Ring For Composite Cross-Arm In 500 Kv Single-Circuit Transmission Tower

Electric Field Calculation and Grading Ring Design for 330kv Terminal Tower with Composite Cross-Arms