Abstract:Recently, the treatment of waste water by Zr-based adsorbents had significantly attracted wide interest among researchers owing to its distinct features. The unique properties of Zr such as thermal stability, large size, high positive charge, greater mechanical rigidity and acid-base nature are mainly responsible for its diverse application. In this work, designing of the new adsorbent material containing tetravalent Zr metal oxide layered double hydroxide (LDH) composite for the removal of anionic dye was studied. The modification of LDH was conducted via the urea hydrolysis method by using zirconium salts as a precursor material. The adsorption efficiency of the as-synthesized material represented as ZrO2/MgAl-LDH was investigated for the decontamination of congo red (CR) dye from an aqueous medium. The adsorbent ZrO2/MgAl-LDH composite was characterized by several instrumental techniques including powder X-ray diffraction (P-XRD), Brunauer-Emmett-Teller (BET), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy(FT-Ir), scanning emission microscopy(SEM), energy dispersive X-ray(EDX), transmission emission microscopy(TEM) and thermogravimetric analysis(TGA). The influence of several experimental factors on the adsorption equilibrium studies such as pH, temperature, initial dye concentration, contact time, adsorbent dosages, and interfering ions are examined under optimized conditions. The thermodynamic study manifests the spontaneous and endothermic nature of the sorption process. Additionally, based on fitting the experimental data with different models the isotherm and kinetics mechanism are found to be more appropriate with Langmuir isotherm, Redlich-Peterson isotherm, and pseudo-second-order kinetics. The spectral analysis further indicates the oxidizing nature of the material, therefore favoring the adsorption of anionic dye. The maximum dye removal efficiency of ZrO2/MgAl-LDH reached up to 97.19% under the optimum reaction condition (initial dye concentration = 50 mg/L, contact dosages = 0.02 g, temperature = 303 K). In addition, the maximum monolayer adsorption capacity (qmax= 169.42 mg) for CR adsorption also reveals its superiority in adsorption test. Moreover, the adsorbent can be easily retrieved and reused up to fifth cycle. Therefore, the characterization and experimental results of ZrO2/MgAl-LDH affirms its potential application for effective decontamination of waste water.

Insight of Anionic Dyes Adsorption from Their Aqueous Solutions onto MgAl LDH/Lignin: Characterization and Isotherm Studies

LDH–Ferrite–Biochar–Polymeric Composites for Enhanced Adsorption–Desorption of Acid Blue 41 and Real Textile Wastewater Purification: A Batch and Column Study

Efficacy of Mg-Al-layered double hydroxide nano-adsorbents for a multi-anionic mixed dye solution

Preparation and Superstrong Adsorption of a Novel La(III)-Crosslinked Alginate/Modified Diatomite Macroparticle Composite for Anionic Dyes Removal from Aqueous Solutions

Synthesis of ZrO2/MgAl-LDH composites and evaluation of its isotherm, kinetics and thermodynamic properties in the adsorption of congo red dye

Understanding the physicochemical properties of Zn–Fe LDH nanostructure as sorbent material for removing of anionic and cationic dyes mixture

Sustainable Bio-Based Adsorbents for Simultaneous and Efficient Removal of Hazardous Dyes from Aqueous Solutions

Industrial Solid Waste-Based Layered Double Hydroxide Composite with Enhanced Adsorption Affinity to Congo Red, Acid Red, and Reactive Red

Adsorption of anionic and cationic azo dyes from wastewater using novel and effective multicomponent adsorbent

Eco-friendly approach for effective removal for Congo red dye from wastewater using reusable Zn-Al layered double hydroxide anchored on multiwalled carbon nanotubes supported sodium dodecyl sulfonate composites

Synthesis, Characterization, and Utilization of a Lignin-Based Adsorbent for Effective Removal of Azo Dye from Aqueous Solution

Design and synthesis of LDH nano composite functionalized with trimesic acid and its environmental application in adsorbing organic dyes indigo carmine and methylene blue

Textural properties and adsorption behaviour of recyclable Ni–Al layered double hydroxides for Congo red and Alizarin red S dyes removal in single and binary systems

Cationic dye remediation in water treatment with Lizardite–Rice Husk composite: A statistical physics approach

NiFe-LDH nanosheet/carbon fiber nanocomposite with enhanced anionic dye adsorption performance

Optimized adsorption and effective disposal of Congo red dye from wastewater: Hydrothermal fabrication of MgAl-LDH nanohydrotalcite-like materials

Efficient Removal of Congo Red, Methylene Blue and Pb(II) by Hydrochar–MgAlLDH Nanocomposite: Synthesis, Performance and Mechanism

Synergism between Polyethyleneimine, Graphene Oxide, and MgFeAl-Layered Triple Hydroxide in Removing Acid Red 1 dye and Bisphenol A from Contaminated Water Samples

Green fabrication and efficiency of activated biochar-layered double hydroxide (LDH) nanocomposites against toxic Pink-XFG dye

Defects-rich MgFe LDH: A Highly Capacity Adsorbent for Methyl Orange Wastewater

Recent progress in layered double hydroxides (LDH)-containing hybrids as adsorbents for water remediation