Sustainable Bio-Based Adsorbents for Simultaneous and Efficient Removal of Hazardous Dyes from Aqueous Solutions

Dhwani Vara,Stuti Jha,Shweta Bisht,Syed Shahabuddin,Rama Gaur,Suhas,Inderjeet Tyagi
DOI: https://doi.org/10.3390/toxics12040266
2024-04-02
Toxics
Abstract:Dyes provide a notable environmental issue as a result of their intrinsic poisonous and carcinogenic characteristics. An estimated 60,000 metric tons of dyes has been discharged into the environment, leading to a substantial increase in water pollution. The mitigation of these dyes is a substantial and intricate challenge. The primary objective of this research is to conduct a comprehensive analysis of the adsorption of cationic dyes containing positively charged groups such as sulphonates, amines, and triphenylmethanes. The adsorption study was carried out using four different low-cost adsorbents derived from biowaste, specifically Groundnut Shell (GS), Mosambi Peel (MP), Mango Bark (MBARK), and Mango Leaves (ML). The adsorbent materials were characterized using FTIR, UV–Vis spectroscopy, scanning electron microscopy (SEM), point-of-zero charge (PZC), and BET techniques. The adsorption capacity was found to be between 1.5 and 2.2 mg/gm for Groundnut Shell, Mosambi Peel, Mango Bark, and Mango Leaves for individual dye removal (Crystal violet, Methylene blue, Rhodamine B, and Malachite green). It was observed that adsorbent derived from mango bark showed excellent adsorption (%) in a mono-component dye system and, thus, was explored for the simultaneous removal of a mixture of the same dyes. MBARK exhibited an excellent overall dye removal efficiency of 94.44% (Qe = 2.7 mg/g) for the dye mixture in 60 min. From a detailed kinetic investigation, it was concluded that the adsorption followed the pseudo-second-order model (R2= 0.99963 to 1 for different dyes and adsorbents) hinting at chemisorption. The effect of the pH of the analyte solution and the dosage of adsorbent was also studied for simultaneous removal. The isothermal studies demonstrated that the Langmuir adsorption model (R2 = 0.99416) was the best-fitted model, suggesting monolayer adsorption. The adsorption process was predicted to be governed by ion exchange, electrostatic interaction, hydrogen bonding, pi–pi interaction, etc., based on charge, functional groups, and pH of dyes and adsorbent. Thus, this study highlights the application of low-cost biowaste as a potential adsorbent for the mitigation of toxic industrial dyes present in wastewater.
environmental sciences,toxicology
What problem does this paper attempt to address?
### Problems the paper attempts to solve This paper aims to solve the problem of toxic dye pollution in industrial wastewater. Specifically, the main objective of the research is to adsorb and remove cationic dyes containing positive - charge groups (such as sulfonate, amine and triphenylmethane). Four low - cost biological wastes from different sources were used as adsorbents in the study, namely groundnut shell (GS), lemon peel (MP), mango bark (MBARK) and mango leaf (ML). Through these biological waste adsorbents, the researchers hope to achieve effective removal of single and mixed dyes, thereby providing a sustainable and economical solution to alleviate the dye pollution problem in water bodies. ### Main research contents 1. **Selection and preparation of adsorbents**: - Four biological wastes (GS, MP, MBARK, ML) were selected as adsorbents and detailed characterization analyses were carried out, including FTIR, UV - Vis spectroscopy, scanning electron microscope (SEM), point of zero charge (PZC) and BET specific surface area tests. 2. **Evaluation of adsorption performance**: - The adsorption capacities of the four adsorbents in single - dye systems (crystal violet, methylene blue, rhodamine B and malachite green) were evaluated. The results showed that the adsorption capacities of these adsorbents were between 1.5 and 2.2 mg/g. - In particular, mango bark (MBARK) exhibited the highest single - component dye adsorption efficiency and was therefore further used for adsorption studies in multi - component dye systems. 3. **Kinetics and isotherm studies**: - Kinetics studies showed that the adsorption process conformed to the pseudo - second - order kinetic model (R² = 0.99963 to 1), indicating that the adsorption process was mainly chemical adsorption. - Isotherm studies showed that the Langmuir model (R² = 0.99416) was the most suitable model, indicating that the adsorption process was mainly monolayer adsorption. 4. **Analysis of influencing factors**: - The effects of solution pH value and adsorbent dosage on the multi - component dye adsorption efficiency were studied. The results showed that the pH value and adsorbent dosage had a significant impact on the adsorption effect. ### Conclusions In this paper, effective removal of various toxic dyes was successfully achieved by using low - cost biological wastes as adsorbents. In particular, mango bark (MBARK) exhibited excellent adsorption performance and was able to achieve a 94.44% multi - component dye removal rate within 60 minutes. These research results provide new ideas for industrial wastewater treatment and show the potential application value of biological wastes in environmental protection.