Development of a Low-Cost and Compact Medical Image Reconstruction Platform Based on EIT Technique
Chi Tran NhuAnh Phan HoangTuan Vu QuocLoc Do QuangPhu Nguyen DangTrinh Chu DucTung Bui Thanh1 Faculty of Electronics and Telecommunications,VNU University of Engineering and Technology,E3 Building,144 Xuan Thuy,Hanoi,100000,Vietnam2 Faculty of Physics,VNU University of Science,334 Nguyen Trai,Hanoi,100000,VietnamChi Tran Nhu received his BSc degree in mechatronics from VNU University of Engineering and Technology,Hanoi,Vietnam,in 2016,and MSc degree in electronics and telecommunications from VNU University of Engineering and Technology,Hanoi,Vietnam,in 2019. He is currently a PhD student at the Faculty of Electronics and Telecommunication,VNU University of Engineering and Technology,Vietnam. His main research involves the study and development of biosensors,microfluidic chip and applications. E-mail: h Phan Hoang received his BS degree in electronic engineering from Post and Telecommunication Institute of Technology,Hanoi,Vietnam in 2019,and master degree in electronic engineering from VNU University of Technology,Hanoi,Vietnam,in 2021. He is currently a lecturer at Faculty of Electronic Technology,VNU,University of Technology,Hanoi,Vietnam. His main research interests include robotics,automation and BioMems. E-mail: anh.ph@vnu.edu.vnTuan Vu Quoc received the BS degree in physics and the MSc degree in electronic engineering from Vietnam National University,Hanoi,in 2007 and 2014,respectively. He is received PhD degree from the VNU – University of Engineering and Technology,Hanoi,Vietnam in 2021. His areas of interest include sensor,fluidic sensor,microfluidic,low lever measurement. E-mail: vqtuan0211@gmail.comLoc Do Quang received his BSc (Hons) degree in radiophysics from the VNU University of Science,Hanoi,Vietnam,in 2014,and PhD degree in radiophysics and electronics from VNU University of Science,Hanoi,Vietnam,in 2019. He is currently a lecturer at the Faculty of Physics,VNU University of Science,Hanoi,Vietnam. His main research interests include the development of electronic biosensor systems and microfluidic technologies for cell manipulation and cell detection. E-mail: locdq@hus.edu.vnPhu Nguyen Dang received the BS and master degree in material science from VNU University of Science,Hanoi,Vietnam 2007 and 2009,respectively. He received the PhD degree in solid state physics from Hanoi National University of Education in 2020. He is currently a lecturer at the Faculty of electronics and telecommunications,VNU University of engineering and technology. His main research interests include the synthesis of nanomaterials for biomedical application,biosensor systems and lab-on-chip. E-mail: phund@vnu.edu.vnTrinh Chu Duc received the BS degree in physics from Hanoi University of Science,Hanoi,Vietnam,in 1998,the MSc degree in electrical engineering from Vietnam National University,Hanoi,in 2002,and the PhD degree from Delft University of Technology,Delft,The Netherlands,in 2007. His doctoral research concerned piezoresistive sensors,polymeric actuators,sensing microgrippers for microparticle handling,and microsystems technology. He is currently a full professor with the Faculty of Electronics and Telecommunications,VNU University of Engineering and Technology,Vietnam National University,Hanoi,Vietnam. He has been chair of Microelectromechanical Systems and Microsystems Department,since 2011. E-mail: trinhcd@vnu.edu.vnTung Bui Thanh received the BS degree in electrical engineering from Vietnam National University,Hanoi (VNUH) in 2004,and the ME and DEng degrees in science and engineering from Ritsumeikan University,Shiga,Japan,in 2008 and 2011,respectively. From 2011 to 2015 he was a postdoctoral researcher with the 3D Integration System Group,Nanoelectronics Research Institute (NeRI),National Institute of Advanced Industrial Science and Technology (AIST),Tsukuba,Japan. Currently,he is an associate professor in the Faculty of Electronics and Telecommunication (FET),VNU University of Engineering and Technology (UET),Vietnam National University,Hanoi (VNUH). His current interests include microfluidics,MEMS-based sensors,actuators and applications. He is the author and co-author of more than 100 scientific articles and 7 inventions. Corresponding author. E-mail: tungbt@vnu.edu.vn
DOI: https://doi.org/10.1080/03772063.2024.2310137
IF: 1.8768
2024-01-31
IETE Journal of Research
Abstract:Electrical impedance tomography (EIT) is an important imaging modality in non-invasive and radiation-free image reconstruction techniques. With the advantages of real-time imaging capabilities, portability, and safety features, EIT has acquired substantial significance as a valuable technique for lung patients during the COVID-19 pandemic. Nevertheless, a significant challenge arises when many COVID-19 patients need to utilize EIT devices for monitoring and treatment. To address this problem, a low-cost and compact wireless communication EIT platform was developed for impedance image reconstruction and real-time monitoring of human lung operations. Since the system was structured as a platform, it can be readily replicated and scaled up in emergencies. The proposed system consisted of 16 electrodes placed on the chest of the lung patients. A stable current was injected into the object through a pair of adjacent electrodes, while the voltage was measured on the remaining electrode pairs using a lock-in amplifier. The electrical impedance between each electrode pair was determined based on Ohm's law. Experimental results showed that the system could reconstruct the shape and the position of objects inside the medium with high accuracy. The average blur radius and percentage of the location error of the reconstructed image were 1.01 ± 0.28 and 5.18 ± 1.35%, respectively. Furthermore, images showing the operation of the human lung were also observed by the proposed system, confirming the possibility of using the system in clinical applications. The proposed EIT system with wireless communication is a potential study for large-scale implementation, particularly in response to the COVID-19 pandemic.
telecommunications,engineering, electrical & electronic