Abstract:White-light OLED devices play an important application in information display fields. Optical interference of the microcavity structure has an important effect on device performances. According to the design of the band structure, ITO/MoO3 composite films were used as the anode, and Mg : Ag (1%) composite films were prepared by coevaporation as the translucent cathode; CuPc was used as the hole injection layer and anode passivation layer, NPB as the hole transmission layer and yellow light main material, rubrene as yellow dopant material, ADN as blue light main material, DSA-Ph as blue dopant material, and TPBi and Alq3 as the electron transport layers. We realized the change of the microcavity structure by adjusting the thickness of each organic functional layer film and simulated and calculated the optimized thickness of each organic film layer and influence on OLED device performances using the SimOLED software system. The optimized OLED microdisplay structure is Si(CMOS)/ITO (35 nm)/MoO3 (2 nm)/CuPc (5 nm)/2-TNATA (20 nm)/NPB (10 nm)/NPB : rubrene (1.5%)ADN : DSA-Ph (5%) (25 nm)/TPBi (15 nm)/Alq3 (1.2 nm)/Mg (13 nm) : Ag (1%). The optimized OLED microdisplay was prepared by the vacuum coating system, and the photoelectric performances of the OLED device were characterized by a spectral testing system consisting of the Photo Research PR655 spectrometer and Keithley 2400 program-controlled power supply. The effect of the microcavity structure on OLED device performances was studied. The results show that the variation of the film thickness of each organic functional layer has an important effect on the performances of OLED microdisplay, such as brightness and color coordinate, and the OLED microdisplay reaches a higher brightness of 3342 cd/m2 under the normal working voltage at 5.0 V after the structure is optimized, with CIE coordinate (0.28, 0.37), which is closer to the energy point of standard white light.

10‐2: Research on low brightness Motion blur in low temperature poly‐silicon display field

Novel Transflective Lcd Based on Patterned Polarizer Using Photoaligrunent Technique

Low-Temperature Effect On The Liquid-Crystal Response Time Of Mobile Displays

Low Temperature Poly-Si TFT Technology

[Analysis of Anti-Ultraviolet Characteristic of Liquid-Crystal Display].

Liquid crystal display and organic light-emitting diode display: present status and future perspectives

Investigation of Perceptual Attributes for Mobile Display Image Quality

Improving Flicker of Low-Refresh-Rate Driven Active-Matrix Organic Light-Emitting Diode Display

51.4: Quantitative Analysis of LCD Motion Blur and Performance of Existing Approaches

Employing Drain-Bias Dependent Electrical Characteristics of Poly-Si TFTs to Improve Gray Level Control in Low Power AMOLED Displays

P-6.10: LTPS-TFT Process for OLED and some issues generated from the manufacturing

Image Quality Evaluation for Smart-Phone Displays at Lighting Levels of Indoor and Outdoor Conditions

Eliminating Hysteresis Effects in Flexible Organic Light-Emitting Diodes

A New Low Temperature Polycrystalline Silicon Thin Film Transistor Pixel Circuit for Active Matrix Organic Light Emitting Diode

A straightforward method to assess motion blur for different types of displays

Study on Display Quality and Visual Fatigue of OLED and QD-LCD

Image quality enhancement in variable refresh rate LTPO-based AMOLED displays using a gate in panel voltage compensation scheme

Electrical performance of a-Si:H and poly-Si TFTs with heating stress

Design Simulation and Preparation of White OLED Microdisplay Based on Microcavity Structure Optimization

LCD Motion Blur Modeling and Analysis

Investigation of Photo-Induced Leakage on Low-K Hydrogen Silsesquioxane for Active Matrix Liquid Crystal Display Technology