Abstract:Fracture in aluminum alloys with precipitates involves at least two mechanisms, namely, ductile fracture of the aluminum-rich matrix and brittle fracture of the precipitates. In this work, a coupled crystal plasticity-phase field model for mixed ductile-brittle failure modes is formulated and used to investigate the effect of precipitate morphology and size distribution on damage evolution in aluminum alloys. A thermodynamically consistent framework for elastic and plastic work dissipation in the fracture process zone is used to formulate the coupled constitutive behavior for brittle and ductile damage, respectively. Representative Volume Elements (RVE) with varying particle morphology and orientation were generated and their uni-axial loading was simulated to assess the damage resistance of the different model microstructures. For critical energy release rate $G_c$ values of the aluminum matrix ranging from 4 to 8~Jm$^{-2}$ for single crystals and from 10 to 16~Jm$^{-2}$ for polycrystals, the model predicts a change in failure modes from particle debonding to cracking followed by ductile matrix failure. The change of particle failure mechanism as a result of increased $G_c$ is observed for both, single and polycrystalline model microstructures. For the case of particle debonding, microstructures with circular or ellipsoidal particles (with the major axis perpendicular to the loading direction) show a higher ductility and fracture work compared to the other studied cases. In the case of particle cracking, microstructures with ellipsoidal particles aligned parallel to the loading axis show a higher ductility and fracture work among the investigated cases. The simulations qualitatively reproduce the experimentally observed particle failure mechanisms (cracking and debonding) for two different matrix alloy classes (commercially pure and 2xxx alloys) reinforced with ceramic particles.

Single Particle Impact Crushing Simulation and Establishment of Specific Fracture Energy Model

Particle fracture regimes from impact simulations

Computational modelling of impact damage in brittle materials

Experimental study and theoretical analysis on ballast particle crushing based on energy dissipation and release

Progress in Complex 2d and 3d Cohesive Fracture Modelling Considering Random Heterogeneity

A breakage model for particulate solids under impact loading

Phase-Field Modeling of Coupled Brittle-Ductile Fracture in Aluminum Alloys

Collision Energy Analysis within the Vertical Shaft Impact Crusher Based on the Computational Fluid Dynamics-Discrete Element Method

Determination of the influence of particle spatial distribution and interface heterogeneity on tensile fracture of ordinary refractory ceramics by applying discrete element modelling

A Study on Phase-Field Models for Brittle Fracture

A JKR-based dynamic model for the impact of micro-particle with a flat surface

A Dynamic Constitutive Model of Ultra High Toughness Cementitious Composites

Fracture Behavior and Size Effect of UHPFRC: Experimental and Mesoscale Numerical Investigation

Analysis of Ductile Fracture by Extended Unified Strength Theory

Fatigue Damage Propagation Models for Ductile Fracture of Ultrahigh Toughness Cementitious Composites

A Finite Element Method (FEM) Study on Adhesive Particle-Wall Normal Collision

Analytical modeling of particle size effect on impact wear deformation characteristics of ductile materials

Plastic deformation and fracture behaviors in particle-reinforced aluminum composites: A numerical approach using an enhanced finite element model

FEM Simulation Analysis on the Impact Force of Impact Crusher

Fragmentation processes in impact of spheres

A Unified Phase Field Damage Model for Modeling the Brittle-Ductile Dynamic Failure Mode Transition in Metals