Abstract:The fragmentation of brittle and heterogeneous spherical solids under impact loading is numerically studied using the combined finite and discrete element method (FDEM) and cohesive crack model. The effect of different fracture mechanisms on the dynamics and statistics of fragmentation is investigated by adjusting the failure criterion of the cohesive interface elements (CIEs). Specifically, three sets of FDEM simulates modeling, the collision of a single spherical specimen against a rigid wall are conducted, each governed by tension-dominated, shear-dominated, and mix-mode fracture mechanisms, respectively. The influence of fracture mode on the resultant fragment mass distribution and shape characteristics after the impact are analyzed through statistical methods. It is found that the final fragment mass distribution can be characterized by a power law function with a higher power-law coefficient for shear-dominated fracture mode than for the tension-dominated fracture mode. This coefficient increases dramatically with increasing impact velocity in the three considered situations. As the impact velocity increases beyond the critical velocity, such coefficient converges to a relatively constant value around 1.743 +/- 0.003, regardless of the controlling of fracture mechanisms. This value is very close to the mean values reported in other experimental and numerical studies in existing literature. The fracture structure is characterized by the direction distributions of fragment velocity and crack surface norms, and the fracture network is visualized by the spatial distribution of broken CIEs viewed from different perspectives. These statistical inspectors allow quantitative discussion of the effect of fracture mechanisms on the fracture patterns developed during impact. It is also found that shear-dominated fracture mode favors the generation of isotropic, rounded, and convex fragments, while tension-dominated fracture mode encourages elongated, angular, and concave fragments.

Particle fracture regimes from impact simulations

Analysis of fragment size and ejection velocity at high strain rate

The Fractal Evolution of Particle Fragmentation under Different Fracture Energy

Fragmentation processes in impact of spheres

Exploring the Regimes of Particle Behavior upon Impact via the Discrete Element Method

Fractal Behavior and Shape Characteristics of Fragments Produced by the Impact of Quasi-Brittle Spheres

Numerical Simulation of Particle Fracture and Surface Erosion Due to Single Particle Impact

Universal behavior in fragmenting brittle, isotropic solids across material properties

Numerical Investigation of Particle Breakage As Applied to Mechanical Crushing—part II: Interparticle Breakage

Single Particle Impact Crushing Simulation and Establishment of Specific Fracture Energy Model

The Effect of Different Fracture Mechanisms on Impact Fragmentation of Brittle Heterogeneous Solid

A breakage model for particulate solids under impact loading

Computational modelling of impact damage in brittle materials

Discrete Element Modeling of Particle Breakage Considering Different Fragment Replacement Modes

Single Particle Fragmentation in Ultrasound Assisted Impact Comminution

Dynamic Simulation for Impact and Fracture of Propellant Grain

Impact Behavior of Intrinsically Brittle Nanoparticles: A Molecular Dynamics Perspective

Evolution of Power‐Law Particle‐Size Distributions in Dense Grain‐Flow Experiments

Simulation on Crushing of Two-dimensional Grains

Fragmentation Analyses of Rocks under High-Velocity Impacts Using the Combined Finite-Discrete Element Simulation