Abstract:The study effectively optimized the transesterification process of Jatropha oil to fatty acid methyl ester using response surface methodology (CCD) and Taguchi orthogonal method, leading to enhanced efficiency and product quality. The optimization of five process parameters was conducted to predict the biodiesel yield (%) from the transesterification of Jatropha oil. The procedure was made easier with the use of a nanocatalyst made from calcium oxide obtained from snail shells using the hydrothermal technique. The RSM approach yielded an optimal FAME of 94.10% under specific conditions: a methanol to oil ratio of 5 : 1, catalyst weight of 1.5 w/w, reaction temperature of 50 °C, reaction duration of 45 minutes, and an agitation speed of 250 rpm across 32 experimental trials. On the other hand, the Taguchi method predicted a higher FAME yield of 86.36% using specific operational parameters. These parameters included a methanol to oil ratio of 4 : 1, catalyst weight of 0.5 w/w, reaction temperature of 60 °C, reaction duration of 25 minutes, and an agitation speed of 200 rpm. These parameters were determined through 16 experimental trials. The RSM technique yielded impressive results with a determined coefficient of determination ( R 2 ) of 0.9943, adjusted R 2 of 0.9838, predicted R 2 of 0.8470, and a coefficient of variance (CV) of 0.65. On the other hand, the Taguchi method had coefficients of 0.8994, 0.7483, and 1.95. The FAME yield of RSM was slightly higher, but the Taguchi method was much more cost-efficient. The analysis of variance (ANOVA) results showed that the methanol to oil ratio had the highest influence on the yield, accounting for 49.61% of the variation. This highlights the significant impact of this factor on the overall process. The study highlights the significance of utilizing advanced techniques such as TOA and RSM, which are known for their effectiveness. The study aims to enhance the yield and efficiency of the transesterification process, thereby increasing the overall production of fatty acid methyl ester from Jatropha oil. This innovative approach efficiently generates biodiesel from renewable resources, like Jatropha oil, in a manner that is both environmentally friendly and maximizes the effectiveness of the process parameters.

Optimization of the catalytic production of methyl stearate by applying response surface Box–Behnken design: an intensified green option for high-cetane biofuel manufacture

Transesterification of Methyl Oleate for Sustainable Production of Biolubricant: Process Optimization and Kinetic Study

Optimization of ethanolic transesterification ultrasound‐assisted from oil mixtures utilizing Box‐Behnken design

Response Surface Optimization of Biocatalytic Biodiesel Production with Acid Oil

Lipase-Assisted Synthesis of Alkyl Stearates: Optimization by Taguchi Design of Experiments and Application as Defoamers

Synthesis of MIL-68 (Al) Catalyst and Optimization of Green Biodiesel Production from Waste Cooking Oil

Response surface optimization of a single-step castor oil-based biodiesel production process using a stator-rotor hydrodynamic cavitation reactor

An Integrated Framework for the Geometric Optimization of Bio-catalytic Microreactor

Modeling and optimization of transesterification of Jatropha oil to fatty acid methyl ester: application of response surface methodology (CCD) and Taguchi orthogonal method

Modeling and global optimization of biodiesel synthesis using hybrid response surface methodology‐crow search algorithm: Case study of papaya seed waste oil utilization

Towards A Bio-Based Industry: Benign Catalytic Esterifications of Succinic Acid in the Presence of Water

Valorization of used cooking oil into bio-based surfactant: modeling and optimization using response surface methodology

Sulfamic acid modified UiO-66 metal-organic framework for biodiesel production: Process optimization using response surface methodology, kinetics, and thermodynamic study

The Optimization of the Production of Methyl Esters from Corn Oil Using Barium Hydroxide as a Heterogeneous Catalyst

Optimization, production, and environmental sustainability of clean energy fuel utilizing reused cooking oil employing CaO catalysts

Optimization of biodiesel production process for mixed nonedible oil (processed dairy waste, mahua oil, and castor oil) using response surface methodology

Optimized biodiesel production from mixed non-edible oils using advanced computational techniques and a novel bifunctional liquified catalyst: Compatibility assessment in IC engines

Optimization of whole cell-catalyzed methanolysis of soybean oil for biodiesel production using response surface methodology

Optimization of the Lipase-Catalyzed Irreversible Transesterification of Pistacia Chinensis Bunge Seed Oil for Biodiesel Production

Effectiveness of RSM based Central Composite Design for optimization of in-situ biodiesel production process from castor seeds

OPTIMIZATION OF DIFFERENT CHEMICAL PROCESSES USING RESPONSE SURFACE METHODOLOGY- A REVIEW