Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. Renewable and green fuels like carbon-free ammonia and carbon neutral algal-biodiesel appear to be more promising alternatives. Reactivity controlled compression ignition offers a viable alternative to classical combustion. In current delving, compression ratio, injection timing and premixing ratio are established by investigating the combustion, performance, and emission parameters of reactivity-controlled compression ignition operation fueled with ammonia and algae biodiesel as low reactive and high reactive fuel. Primarily, different compression ratio (16, 17, and 18) for different ammonia energy premixing fractions (20%, 30%, 40%, and 50%) at 80% load with standard injection time (24° before top dead center) was evaluated to identify the ideal compression ratio. Next stage, different Injection timing (24°, 26°, and 28° before top dead center) was examined with that ideal compression ratio at 80% load utilizing combustion attributes. Finally, with the ideal compression ratio and injection timing (18° and 26°), the performance and emission for various ammonia energy premixing fractions (20%, 30%, 40%, and 50%) on the entire load ranges (20%, 40%, 60%, 80%, and 100%) were investigated and the optimal fuel fraction was arrived by multi objective optimization technique in response surface methodology by considering response weights. The multi objective optimization result enhances the 43% ammonia premixing combustion. The experimental validation of 43% ammonia premixing combustion achieved the best brake thermal efficiency of 34.02% whereas fuel consumption is 12.72 MJ/kWh. The maximum emission rate of hydrocarbon, carbon monoxide, carbon dioxide, oxides of nitrogen and smoke opacity is 47 ppm, 0.084% volume, 2.04% volume 593 ppm and 15.9%. In comparison to the Conventional biodiesel combustion, an increase in efficiency of 3.34% and a decrease in energy consumption of 3.72% are achieved for the 43% ammonia energy premixing combustion. Similarly, emissions were reduced by 45.35%, 44%, 46.25%, 23.44%, and 28.38% respectively than conventional biodiesel combustion.

Experimental assessment and optimization of the performance of a biodiesel engine using response surface methodology

Multiple response optimizations to improve performance and reduce emissions of Argemone Mexicana biodiesel-diesel blends in a VCR engine

Optimization of biodiesel production parameters for hybrid oil using RSM and ANN technique and its effect on engine performance, combustion, and emission characteristics

Diesel Engine Performance and Emission Parameters Optimization Using Taguchi and Response Surface Methodology

A Taguchi-based hybrid multi-criteria decision-making approach for optimization of performance characteristics of diesel engine fuelled with blends of biodiesel-diesel and cerium oxide nano-additive

Optimisation of an experimental and feasibility research on a CRDI diesel engine based on a blend of waste cooking oil and waste plastic oil using RSM: A value addition for disposed waste oil

Multi-objective optimization of the performance and emissions characteristics of a CI engine powered by Pyrus glabra biodiesel as a novel feedstock using response surface method

Optimization of engine performance, emission and combustion parameters by using mixed nonedible oil biodiesel with nano-additives using hybrid techniques

Performance and Emission Analysis of Biodiesel Blends in a Low Heat Rejection Engine with an Antioxidant Additive: An Experimental Study

Performance and emission characteristics of novel biodiesel-diesel blends: an RSM and ANN approach

Effective utilization of tobacco (Nicotiana Tabaccum) for biodiesel production and its application on diesel engine using response surface methodology approach

Multi-response and multi-criteria decision-making optimization of transesterification reaction for biodiesel production based on critic weight determination method

Application of adaptive neuro-fuzzy inference system and response surface methodology in biodiesel synthesis from jatropha–algae oil and its performance and emission analysis on diesel engine coupled with generator

Optimized biodiesel production from mixed non-edible oils using advanced computational techniques and a novel bifunctional liquified catalyst: Compatibility assessment in IC engines

Multi-objective optimization of ternary blends of Algal biodiesel-diesel-1-decanol to mitigate environmental pollution in powering a diesel engine using RSM, ANOVA, and artificial bee colony

Overall Performance Investigation and Optimization of a Multi-fuel Operated Compression Ignition Engine Using Coupled Taguchi and Grey Relational Analysis

Optimization of ideal engine parameters to adopt ammonia and algae biodiesel for reactivity controlled compression ignition engine using response surface methodology

Comparative thermal assessment and emission analysis of various green biodiesel from novel feedstocks for CI engines: a sustainable approach towards emission reduction

Optimization, production, and environmental sustainability of clean energy fuel utilizing reused cooking oil employing CaO catalysts

Performance analysis and optimization of thermal barrier coated piston diesel engine fuelled with biodiesel using RSM

Modeling and global optimization of biodiesel synthesis using hybrid response surface methodology‐crow search algorithm: Case study of papaya seed waste oil utilization