Aluminum–air batteries: current advances and promises with future directions

Bharti Rani,Jitendra Kumar Yadav,Priyanka Saini,Anant Prakash Pandey,Ambesh Dixit

DOI: https://doi.org/10.1039/d4ra02219j

IF: 4.036

2024-01-01

RSC Advances

Abstract:Owing to their attractive energy density of about 8.1 kW h kg −1 and specific capacity of about 2.9 A h g −1 , aluminum–air (Al–air) batteries have become the focus of research.

chemistry, multidisciplinary

What problem does this paper attempt to address?

A comprehensive review on recent progress in aluminumâair batteries

Yisi Liu,Qian Sun,Wenzhang Li,Keegan R. Adair,Jie Li,Xueliang Sun

IF: 12.781

2017-01-01

Green Energy & Environment

Abstract:The aluminumâair battery is considered to be an attractive candidate as a power source for electric vehicles (EVs) because of its high theoretical energy density (8100 Wh kgâ1), which is significantly greater than that of the state-of-the-art lithium-ion batteries (LIBs). However, some technical and scientific problems preventing the large-scale development of Alâair batteries have not yet to be resolved. In this review, we present the fundamentals, challenges and the recent advances in Alâair battery technology from aluminum anode, air cathode and electrocatalysts to electrolytes and inhibitors. Firstly, the alloying of aluminum with transition metal elements is reviewed and shown to reduce the self-corrosion of Al and improve battery performance. Additionally for the cathode, extensive studies of electrocatalytic materials for oxygen reduction/evolution including Pt and Pt alloys, nonprecious metal catalysts, and carbonaceous materials at the air cathode are highlighted. Moreover, for the electrolyte, the application of aqueous and nonaqueous electrolytes in Alâair batteries are discussed. Meanwhile, the addition of inhibitors to the electrolyte to enhance electrochemical performance is also explored. Finally, the challenges and future research directions are proposed for the further development of Alâair batteries. Keywords: Aluminumâair battery, Aluminum anode, Air cathode, Oxygen reduction reaction, Electrolytes
A comprehensive review on recent progress in aluminum–air batteries

Yisi Liu,Qian Sun,Wenzhang Li,Keegan R. Adair,Jie Li,Xueliang Sun

DOI: https://doi.org/10.1016/j.gee.2017.06.006

IF: 12.781

2017-01-01

Green Energy & Environment

Abstract:The aluminum–air battery is considered to be an attractive candidate as a power source for electric vehicles (EVs) because of its high theoretical energy density (8100 Wh kg−1), which is significantly greater than that of the state-of-the-art lithium-ion batteries (LIBs). However, some technical and scientific problems preventing the large-scale development of Al–air batteries have not yet to be resolved. In this review, we present the fundamentals, challenges and the recent advances in Al–air battery technology from aluminum anode, air cathode and electrocatalysts to electrolytes and inhibitors. Firstly, the alloying of aluminum with transition metal elements is reviewed and shown to reduce the self-corrosion of Al and improve battery performance. Additionally for the cathode, extensive studies of electrocatalytic materials for oxygen reduction/evolution including Pt and Pt alloys, nonprecious metal catalysts, and carbonaceous materials at the air cathode are highlighted. Moreover, for the electrolyte, the application of aqueous and nonaqueous electrolytes in Al–air batteries are discussed. Meanwhile, the addition of inhibitors to the electrolyte to enhance electrochemical performance is also explored. Finally, the challenges and future research directions are proposed for the further development of Al–air batteries.
An Overview and Future Perspectives of Aluminum Batteries

Giuseppe Antonio Elia,Krystan Marquardt,Katrin Hoeppner,Sebastien Fantini,Rongying Lin,Etienne Knipping,Willi Peters,Jean-Francois Drillet,Stefano Passerini,Robert Hahn

DOI: https://doi.org/10.1002/adma.201601357

Abstract:A critical overview of the latest developments in the aluminum battery technologies is reported. The substitution of lithium with alternative metal anodes characterized by lower cost and higher abundance is nowadays one of the most widely explored paths to reduce the cost of electrochemical storage systems and enable long-term sustainability. Aluminum based secondary batteries could be a viable alternative to the present Li-ion technology because of their high volumetric capacity (8040 mAh cm(-3) for Al vs 2046 mAh cm(-3) for Li). Additionally, the low cost aluminum makes these batteries appealing for large-scale electrical energy storage. Here, we describe the evolution of the various aluminum systems, starting from those based on aqueous electrolytes to, in more details, those based on non-aqueous electrolytes. Particular attention has been dedicated to the latest development of electrolytic media characterized by low reactivity towards other cell components. The attention is then focused on electrode materials enabling the reversible aluminum intercalation-deintercalation process. Finally, we touch on the topic of high-capacity aluminum-sulfur batteries, attempting to forecast their chances to reach the status of practical energy storage systems.
Primary aluminum-air flow battery for high-power applications: Optimization of power and self-discharge

Dayatri Bolaños-Picado,Cindy Torres,Diego González-Flores

DOI: https://doi.org/10.5599/jese.2075

2023-11-14

Journal of Electrochemical Science and Engineering

Abstract:Aluminum-air batteries are a front-runner technology in applications requiring a primary energy source. Aluminum-air flow batteries have many advantages, such as high energy density, low price, and recyclability. One of the main challenges with aluminum-air batteries is achieving high power while parasitic corrosion and self-discharge are minimized. In this study, the optimization of an aluminum-air flow cell by multiple-parameters analysis and integration of a four-cell stack are shown. We also studied the incorporation of ammonium metavanadate (NH4VO3) as anticorrosive in 4 mol L-1 KOH electrolyte by discharge and polarization plots. It was concluded that NH4VO3 is an efficient anticorrosive at low currents, but it limits the battery reaction at high-current and high-power applications. Nevertheless, high currents inhibit the corrosion reaction using 4 mol L-1 KOH electrolyte, allowing high power and capacity without anticorrosive additives. The flow in the stack also plays a significant role, and parallel flow is suggested over cascade flow since the latter results in the progressive accumulation of hydrogen as the electrolyte flows through the stack.
Investigation of Commercial Aluminum Alloys As Anode Materials for Alkaline Aluminum–air Batteries

Tao Wang,Yuan Zhu,Yifan Li,Kai Yang,Wenyi Lu,Ke Peng,Zhongliang Tian

DOI: https://doi.org/10.1039/d2se01341j

IF: 6.813

2022-01-01

Sustainable Energy & Fuels

Abstract:Employed as anode materials for aqueous alkaline Al–air batteries, commercial aluminum alloys realized energy conversion and resource sustainability.
Experimental Investigation on Various Aluminium Composite Material for Aluminium-Air batteries

G. Thenmozhi,P.S. Samuel Ratnakumar,S. John Alexis,S.P. Praison Abe Francis,S. Siva,S. Hrithik

DOI: https://doi.org/10.4273/ijvss.14.7.01

2023-02-28

International Journal of Vehicle Structures and Systems

Abstract:The loftiest energy-putting away advancements looked by experimenters are metal-air batteries. Among them, aluminium is a plentiful and enticing anode material for energy capacity and change, as a result of its high unambiguous limit. The hypothetical explicit energy of a promoted lithium-particle battery is 120-200 Wh/kg. The aluminium-air battery has the second biggest limit, coming behind the Lithium-air battery, which is the most grounded auxiliary battery. Three unique kinds of aluminium accessories will be utilized for anode AA5083, certified with multiwall carbon nano tubes, to decrease cell impedance and disintegration. The electrolyte will be KOH. The cathode will be a carbon or graphite plate. An aluminium-air battery has been accessible on demand as an essential battery. To be created as an optional battery, every cell of the battery is compared to anode and cathodes.
Aluminum batteries: Unique potentials and addressing key challenges in energy storage

Khurram Shahzad,Izzat Iqbal Cheema

DOI: https://doi.org/10.1016/j.est.2024.111795

IF: 9.4

2024-05-06

Journal of Energy Storage

Abstract:The study of electropositive metals as anodes in rechargeable batteries has seen a recent resurgence and is driven by the increasing demand for batteries that offer high energy density and cost-effectiveness. Aluminum, being the Earth's most abundant metal, has come to the forefront as a promising choice for rechargeable batteries due to its impressive volumetric capacity. It surpasses lithium by a factor of four and sodium by a factor of seven, potentially resulting in significantly enhanced energy density. These batteries, now commonly referred to as aluminum-ion batteries, offer numerous advantages. These advantages include the abundance of aluminum, its superior charge storage capacity using Al 3+ ions in comparison to Li ions, and a fourfold greater volumetric capacity for Al anodes, all while avoiding the safety concerns associated with alkali metals. Nevertheless, there are challenges to address in pursuing this technology. These challenges encompass the intricate Al 3+ intercalation process and the problem of anode corrosion, particularly in aqueous electrolytes. This review aims to explore various aluminum battery technologies, with a primary focus on Al-ion and Al‐sulfur batteries. It also examines alternative applications such as Al redox batteries and supercapacitors, with pseudocapacitance emerging as a promising method for accommodating Al 3+ ions. Additionally, the review briefly mentions the potential utilization of Al anodes in lithium-ion batteries.

energy & fuels
Aluminum: The future of Battery Technology

Zdravko Pandur,Marijan Šušnjar,Marin Bačić

DOI: https://doi.org/10.26434/chemrxiv-2024-wnt0j

2024-04-24

Abstract:Due to the world turning away from fossil fuels and towards renewable energy, electrical energy is becoming increasingly important. Aluminum-ion batteries (AIBs) are promising contenders in the realm of electrochemical energy storage. While lithium-ion batteries (LIBs) have long dominated the market with their high energy density and durability, sustainability concerns stem from the environmental impact of raw material extraction and manufacturing processes, and performance-related drawbacks include limited lifespan, safety hazards like thermal runaway, and challenges in recycling. AIBs stand out for their superior sustainability and theoretical capacity, powered by the usage of trivalent aluminum ions (Al³⁺), due to a higher abundance in Earth’s crust and a well-established recycling infrastructure. Despite the advantages of AIBs in sustainability and theoretical capacity, their widespread commercial use has been hindered by certain electrochemical limitations, such as challenges in achieving competitive energy density and addressing issues related to the efficient cycling of trivalent aluminum ions. This paper delves into the merits of AIBs, exploring their potential to surpass LIBs and serve as the leading battery technology of the future.

Chemistry
Recent Progress and Future Trends of Aluminum Batteries

Yuxiang Hu,Dan Sun,Bin Luo,Lianzhou Wang

DOI: https://doi.org/10.1002/ente.201800550

IF: 4.149

2018-01-01

Energy Technology

Abstract:As one of the most promising alternatives to next-generation energy storage systems, aluminum batteries (ABs) have been attracting rapidly increasing attention over the past few years. In this review, we summarize the recent advancements of ABs based on both aqueous and non-aqueous electrolytes, with a particular focus on rechargeable non-aqueous ionic liquid-based aluminum-ion batteries (AIBs). Progress of the current intensive investigation on the development of cathode materials and electrolytes in non-aqueous AIBs are discussed. Then research efforts towards aqueous ABs are described to give readers a broader view of the aluminum battery family. Finally, the review summaries the key challenges underpinning ABs and provides future research perspectives on this growing field.
High performance aluminum-air battery for sustainable power generation

Weng Cheong Tan,Lip Huat Saw,Ming Chian Yew,Dongyang Sun,Wei-Hsin Chen

DOI: https://doi.org/10.1016/j.ijhydene.2022.11.247

IF: 7.2

2022-12-31

International Journal of Hydrogen Energy

Abstract:Metal-air battery is receiving vast attention due to its promising capabilities as an energy storage system for the post lithium-ion era. The electricity is generated through oxidation and reduction reaction within the anode and cathode. Among various types of metal-air battery, aluminum-air battery is the most attractive candidate due to its high energy density and environmentally friendly. In this study, a novel polypropylene-based dual electrolyte aluminum-air battery is developed. Polypropylene pads are used as a medium to absorb the electrolyte, isolate the anode and cathode, control the hydrogen generation in the parasitic reaction. Potassium hydroxide is used as anolyte and sulfuric acid is used as catholyte. Parametric study is conducted to investigate the effect of electrolyte concentration and polypropylene separator thickness on the performance of the battery. The results show that the dual-electrolyte system can boost the open circuit voltage to 2.2 V as compared to the single electrolyte system for 5 M of anolyte while maintaining specific discharge capacity of about 1390.92 mAh.g −1 . The maximum peak power density has improved dramatically from 100 mW.cm −2 to 350 mW cm −2 for the dual electrolyte system.

energy & fuels,electrochemistry,chemistry, physical
Challenges and Strategies of Aluminum Anodes for High‐Performance Aluminum–Air Batteries

Yuxin Zhang,Chaonan Lv,Yuanxin Zhu,Jialin Kuang,Haiyan Wang,Yixin Li,Yougen Tang

DOI: https://doi.org/10.1002/smtd.202300911

IF: 12.4

2023-12-29

Small Methods

Abstract:Aluminum–air batteries (AABs) are considered as a potential next‐generation storage/conversion system candidate. However, aluminum anodes suffer from severe self‐corrosion reactions in alkaline electrolytes, which greatly limit the practical application of AABs. This article reviews the recent strategies to mitigate anodic corrosion and prospects for the future development direction of AABs. Aluminum–air battery (AAB) is a promising candidate for next‐generation energy storage/conversion systems due to its cost‐effectiveness and impressive theoretical energy density of 8100 Wh kg−1, surpassing that of lithium‐ion batteries. Nonetheless, the practical applicability of AABs is hampered by the occurrence of serious self‐corrosion side reactions and substantial capacity loss, resulting in suboptimal anode utilization. Consequently, improving the anode utilization to facilitate the construction of high‐performance AABs have attracted widespread attention. Herein, the fundamentals and strategies to enhance aluminum anode utilization are reviewed from modifications of aluminum anodes and electrolytes. This comprehensive review may provide a scientific tool for the development of novel AABs in the future.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
High performance aluminum-air flow batteries through double-face architecture and laser-modified and friction-stir processed 3D anode

Lingyue Zhang,David Fieser,Bapi Bera,Douglas Aaron,Matthew M. Mench,Anming Hu,Yuan Li,Jian Chen,Zhili Feng,Antonino Gulino,Giuseppe Compagnini

DOI: https://doi.org/10.1016/j.jpowsour.2023.233752

IF: 9.2

2023-11-01

Journal of Power Sources

Abstract:Aluminum-air batteries (AAB) are regarded as one of the most promising beyond-lithium high-energy-density storage candidates. This paper introduces a three-dimensional (3D) Al 7075 anode enabled by femtosecond laser and friction-stir process which, along with a special double-face anode architecture provides world-class performance. Electrochemical characterizations prove that the corrosion resistance of the modified 3D Al 7075 FSP anode was enhanced, and electrochemically active surface area (ECSA) was increased compared with that of normal Al 7075 anode. Friction-stir processing reduced the mean grain size from 30 μm to 3 μm. The discharge performance of 3D Al 7075 FSP anode is shown to be quite stable, and the average values of energy density are significantly increased from 2256 mWh g −1 to 2941 mWh g −1 at 100 mA cm −2 . In a double-face flowing Al-air battery system, the 3D Al 7075 FSP anode exhibited significantly better electrocatalytic performance (discharge voltage of 0.76 V at 400 mA cm −2 , and power density of 337.8 mW cm −2 ) than that of a commercial Al 7075 anode.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
Eco-Sustainable Aluminum-Air Batteries

Maria F. Gaele,Pasquale Gargiulo,Tonia M. Di Palma

DOI: https://doi.org/10.1080/00032719.2024.2345745

2024-05-03

Analytical Letters

Abstract:Aluminum-air batteries are energy conversion devices considered to be promising alternative to lithium-ion batteries due to their high theoretical energy density as well as the easy availability and recyclability of the anode material. The use of neutral water-based electrolytes and raw materials of natural or synthetic but biodegradable origin in the battery components, mainly electrolytes and cathodes, adds further advantages of safety, affordable costs and eco-friendliness. In this work, the electrochemical performance of aluminum-air batteries assembled with gel polymer electrolytes, made of natural polysaccharides and saline aqueous solutions, was investigated and discussed, through comparing the results obtained using cathodes based on platinum catalyst with respect to those based on a cheaper wood-derived activated carbon. Three-electrodes discharge measurements, rate performance tests, polarization and power density curves, and linear sweep voltammetry measurements were used to critically compare different cathodic materials used in combination with neutral electrolytes. The results show that the best electrochemical performances were obtained for aluminum-air cells assembled with wooden biomass-derived air cathodes.

chemistry, analytical
Advances of Aluminum Based Energy Storage Systems

Lijun Fu,Na Li,Yu Liu,Weigang Wang,Yusong Zhu,Yuping Wu

DOI: https://doi.org/10.1002/cjoc.201600655

IF: 5.56

2017-01-01

Chinese Journal of Chemistry

Abstract:Rechargeable aluminum based batteries and supercapacitors have been regarded as promising sustainable energy storage candidates, because aluminum metal is the most abundant metal element in the earth crust, and it delivers very high volumetric capacity and acceptable gravimetric capacity. This mini review presents the brief development of Al-based primary batteries, and introduces the latest advances of rechargeable Al-based energy storage systems with both nonaqueous and aqueous electrolytes.
A Mechanistic Overview of the Current Status and Future Challenges of Aluminum Anode and Electrolyte in Aluminum-Air Batteries

S M Abu Nayem,Santa Islam,Mostafa Mohamed,Syed Shaheen Shah,A J Saleh Ahammad,Md Abdul Aziz

DOI: https://doi.org/10.1002/tcr.202300005

Abstract:Aluminum-air batteries (AABs) are regarded as attractive candidates for usage as an electric vehicle power source due to their high theoretical energy density (8100 Wh kg-1 ), which is considerably higher than that of lithium-ion batteries. However, AABs have several issues with commercial applications. In this review, we outline the difficulties and most recent developments in AABs technology, including electrolytes and aluminum anodes, as well as their mechanistic understanding. First, the impact of the Al anode and alloying on battery performance is discussed. Then we focus on the impact of electrolytes on battery performances. The possibility of enhancing electrochemical performances by adding inhibitors to electrolytes is also investigated. Additionally, the use of aqueous and non-aqueous electrolytes in AABs is also discussed. Finally, the challenges and potential future research areas for the advancement of AABs are suggested.
Metal-air batteries: progress and perspective

Yuhui Chen,Jijing Xu,Ping He,Yu Qiao,Shaohua Guo,Huijun Yang,Haoshen Zhou

DOI: https://doi.org/10.1016/j.scib.2022.11.027

IF: 18.9

2022-12-01

Science Bulletin

Abstract:The metal-air batteries with the largest theoretical energy densities have been paid much more attention. However, metal-air batteries including Li-air/O2, Li-CO2, Na-air/O2, and Zn-air/O2 batteries, are complex systems that have their respective scientific problems, such as metal dendrite forming/deforming, the kinetics of redox mediators for oxygen reduction/evolution reactions, high overpotentials, desolution of CO2, H2O, etc. from the air and related side reactions on both anode and cathode. It should be the main direction to address these shortages to improve performance. Here, we summarized recently research progress in these metal-air/O2 batteries. Some perspectives are also provided for these research fields.

multidisciplinary sciences
Recent Theoretical and Experimental Advancements of Aluminum‐Sulfur Batteries

Muhammad Faheem,Arshad Hussain,Muhammad Ali,Abdul Aziz,Md. Abdul Aziz

DOI: https://doi.org/10.1002/tcr.202300268

IF: 6.935

2023-10-24

The Chemical Record

Abstract:Abstract Aluminum‐sulfur batteries (AlSBs) exhibit significant potential as energy storage systems due to their notable attributes, including a high energy density, cost‐effectiveness, and abundant availability of aluminum and sulfur. In order to commercialize AlSBs, an understanding of their working principles is necessary. In this review, we examine the current advancements in cathodes, both in theory and practice, as well as the progress made in aqueous and nonaqueous electrolytes. We also explore the modifications made to separators and the theoretical understanding of problems associated with AlSBs. Furthermore, we discuss future research directions aimed at resolving these issues. Our aim is to summarize the current progress in AlSBs and, based on recent progress and understanding of the mechanism, help design a battery to overcome the challenges that such batteries have been facing.

chemistry, multidisciplinary
A Mechanistic Overview of the Current Status and Future Challenges in Air Cathode for Aluminum Air Batteries

Santa Islam,S M Abu Nayem,Ahtisham Anjum,Syed Shaheen Shah,A J Saleh Ahammad,Md Abdul Aziz

DOI: https://doi.org/10.1002/tcr.202300017

Abstract:Aluminum air batteries (AABs) are a desirable option for portable electronic devices and electric vehicles (EVs) due to their high theoretical energy density (8100 Wh K-1 ), low cost, and high safety compared to state-of-the-art lithium-ion batteries (LIBs). However, numerous unresolved technological and scientific issues are preventing AABs from expanding further. One of the key issues is the catalytic reaction kinetics of the air cathode as the fuel (oxygen) for AAB is reduced there. Additionally, the performance and price of an AAB are directly influenced by an air electrode integrated with an oxygen electrocatalyst, which is thought to be the most crucial element. In this study, we covered the oxygen chemistry of the air cathode as well as a brief discussion of the mechanistic insights of active catalysts and how they catalyze and enhance oxygen chemistry reactions. There is also extensive discussion of research into electrocatalytic materials that outperform Pt/C such as nonprecious metal catalysts, metal oxide, perovskites, metal-organic framework, carbonaceous materials, and their composites. Finally, we provide an overview of the present state, and possible future direction for air cathodes in AABs.
An All-Solid-State Fiber-Shaped Aluminum-Air Battery with Flexibility, Stretchability, and High Electrochemical Performance.

Yifan Xu,Yang Zhao,Jing Ren,Ye Zhang,Huisheng Peng

DOI: https://doi.org/10.1002/anie.201601804

2016-01-01

Angewandte Chemie

Abstract:Owing to the high theoretical energy density of metal-air batteries, the aluminum-air battery has been proposed as a promising long-term power supply for electronics. However, the available energy density from the aluminum-air battery is far from that anticipated and is limited by current electrode materials. Herein we described the creation of a new family of all-solid-state fiber-shaped aluminum-air batteries with a specific capacity of 935 mAh g(-1) and an energy density of 1168 Wh kg(-1) . The synthesis of an electrode composed of cross-stacked aligned carbon-nanotube/silver-nanoparticle sheets contributes to the remarkable electrochemical performance. The fiber shape also provides the aluminum-air batteries with unique advantages; for example, they are flexible and stretchable and can be woven into a variety of textiles for large-scale applications.
Metal–Air Batteries: Will They Be the Future Electrochemical Energy Storage Device of Choice?

Yanguang Li,Jun Lu

DOI: https://doi.org/10.1021/acsenergylett.7b00119

IF: 22

2017-01-01

ACS Energy Letters

Abstract:Metal–air batteries have a theoretical energy density that is much higher than that of lithium-ion batteries and are frequently advocated as a solution toward next-generation electrochemical energy storage for applications including electric vehicles or grid energy storage. However, they have not fulfilled their full potential because of challenges associated with the metal anode, air cathode, and electrolyte. These challenges will have to be properly resolved before metal–air batteries can become a practical reality and be deployed on a large scale. Here we survey the current status and latest advances in metal–air battery research for both aqueous (e.g., Zn–air) and nonaqueous (e.g., Li–air) systems. An overview of the general technical issues confronting their development is presented, and our perspective on possible solutions is offered.

Aluminum–air batteries: current advances and promises with future directions

A comprehensive review on recent progress in aluminumâair batteries

A comprehensive review on recent progress in aluminum–air batteries

An Overview and Future Perspectives of Aluminum Batteries

Primary aluminum-air flow battery for high-power applications: Optimization of power and self-discharge

Investigation of Commercial Aluminum Alloys As Anode Materials for Alkaline Aluminum–air Batteries

Experimental Investigation on Various Aluminium Composite Material for Aluminium-Air batteries

Aluminum batteries: Unique potentials and addressing key challenges in energy storage

Aluminum: The future of Battery Technology

Recent Progress and Future Trends of Aluminum Batteries

High performance aluminum-air battery for sustainable power generation

Challenges and Strategies of Aluminum Anodes for High‐Performance Aluminum–Air Batteries

High performance aluminum-air flow batteries through double-face architecture and laser-modified and friction-stir processed 3D anode

Eco-Sustainable Aluminum-Air Batteries

Advances of Aluminum Based Energy Storage Systems

A Mechanistic Overview of the Current Status and Future Challenges of Aluminum Anode and Electrolyte in Aluminum-Air Batteries

Metal-air batteries: progress and perspective

Recent Theoretical and Experimental Advancements of Aluminum‐Sulfur Batteries

A Mechanistic Overview of the Current Status and Future Challenges in Air Cathode for Aluminum Air Batteries

An All-Solid-State Fiber-Shaped Aluminum-Air Battery with Flexibility, Stretchability, and High Electrochemical Performance.

Metal–Air Batteries: Will They Be the Future Electrochemical Energy Storage Device of Choice?

A comprehensive review on recent progress in aluminumâair batteries