Abstract:Chromium (Cr) is a heavy metal that has a serious environmental pollution problem. Electroplating wastewater contains high level of Cr that surpassed the acceptable environmental discharge standard limit in surface water bodies and causes aquatic ecosystem risks. Various studies have been conducted in Ethiopia on the removal of Cr from various types of wastewater; however, factual studies on the adaptability of cost-effective activated coffee husk carbon for the removal of Cr from electroplating wastewater are lacking. Thus, this study was conducted to evaluate the Cr adsorption efficiency of activated coffee husk carbon from electroplating wastewater at laboratory scale. The activated coffee husk carbon’s pH, electrical conductivity (EC), ash content, moisture content, bulk density, particle size, pore volume, porosity, volatile organic matter, carbon yield, and carbon:nitrogen ratio were determined following standard methods. In the adsorption experiment, adsorbent dosage, agitation speed, contact time, pH, and initial concentration were optimized. Models were used to examine the adsorption isotherms and kinetics. The ability of activated coffee husk carbon to desorb Cr was investigated. The adsorbent functional groups and surface morphology were examined using Fourier transform infrared (FTIR) spectroscopy and scanning electron microscope (SEM), respectively. Analysis of the physicochemical characteristics of the adsorbent showed that the activated coffee husk carbon has good quality, and thus, playing an important role in metal adsorption. Furthermore, FTIR analysis also confirmed the presence of hydroxyl, carboxyl, and other important functional groups, which promote heavy metal adsorption. The adsorption process optimization revealed 99.65% maximum Cr adsorption efficiency at 120 min contact time, 40 mgL-1 initial concentration, 150 rpm agitation speed, pH 7.0, and 20 gL-1 adsorbent dosages. From the adsorption model studies, Freundlich sorption isotherm and pseudosecond-order models were well fitted with respective R 2 values of 0.987 and 0.999. A 60% Cr was removed according to desorption studies. In general, due to the ease with which coffee husk can be obtained from coffee processing facilities, its use as an absorbent will be cost-effective and considered as an alternative option in removing Cr metal from wastewaters.

Response Surface Methodology (RSM) for Optimization Carbonization Parameters of Exhausted Coffee Husk for Iron Removal from Aqueous Solution

Optimization of the Carbonization Parameter of Exhausted Coffee Husk (ECH) as Biochar for Pb and Cu Removal Based on Energy Consumption

Adsorption Parameters Optimization of Spent Coffee Ground Biochar for Methylene Blue Removal Using Response Surface Methodology

Adsorption of Cadmium, Manganese and Lead Ions from Aqueous Solutions Using Spent Coffee Grounds and Biochar Produced by Its Pyrolysis in the Fluidized Bed Reactor

Optimization of biochar preparation from the stem of Eichhornia crassipes using response surface methodology on adsorption of Cd2+

Optimized carbonization of coffee shell via response surface methodology: A circular economy approach for environmental remediation

Mechanisms for the Removal of Cd(II) and Cu(II) from Aqueous Solution and Mine Water by Biochars Derived from Agricultural Wastes.

Improving the adsorption properties of low surface area hardwood biochar for the removal of Fe+ and PO43− from aqueous solution

Improving the adsorption properties of low surface area hardwood biochar for the removal of Fe+ and PO₄3- from aqueous solution

Cadmium removal from aqueous solution by blended bamboo sawdust/rice-husk biochar; optimization of influencing parameters

Response surface method based parametric optimization of Cr(VI) removal from tannery wastewater using a mixed banana peel and corn cob activated carbon: Kinetic and isotherm modeling studies

Multicomponent Adsorption of Pollutants from Wastewater Using Low-Cost Eco-Friendly Iron-Modified Rice Husk Biochar in the Era of Green Chemistry

Box–Behnken design to optimize Ni(II) adsorption using coffee husk-derived biochar compositing with MnFe2O4

Optimization and Modeling of Cr (VI) Removal from Tannery Wastewater onto Activated Carbon Prepared from Coffee Husk and Sulfuric Acid (H2SO4) as Activating Agent by Using Central Composite Design (CCD)

Optimization of preparation conditions for biochar derived from water hyacinth by using response surface methodology (RSM) and its application in Pb2+ removal

Response surface methodology–based optimisation of adsorption of diclofenac and treatment of pharmaceutical effluent using combined coagulation-adsorption onto nFe2O3 decorated water chestnut shells biochar

Adsorption and desorption of nutrients from abattoir wastewater: modelling and comparison of rice, coconut and coffee husk biochar

Chromium Removal from Electroplating Wastewater Using Activated Coffee Husk Carbon

Removal of Selected Heavy Metal Ions from Industrial Wastewater Using Rice and Corn Husk Biochar

Modelling and Optimization of Biochar-Based Adsorbent Derived from Wheat Straw Using Response Surface Methodology on Adsorption of Pb2+

Adsorption of chromium (VI) and Acid Orange 7 on lemon peel biochar: a response surface methodology approach