Modelling and Optimization of Biochar-Based Adsorbent Derived from Wheat Straw Using Response Surface Methodology on Adsorption of Pb2+

Pawar, Ashish

DOI: https://doi.org/10.1007/s41742-022-00498-3

2022-12-15

International Journal of Environmental Research

Abstract:The removal of Pb 2+ from wheat straw-derived biochar produced at 600 °C was studied. Proximate, Ultimate, FTIR, SEM, TG–DTA, and BET surface area analyses were carried out to determine the morphology of the wheat straw biochar. The wheat straw biochar was found a larger surface area, pore volume, and pore diameter to be around 70.12 m 2 /g, 0.076 cm 3 /g, and 1.5 nm. The interactive effect of three process variables viz. the biochar dosage (1–3 g/l), heavy metal concentration (0.02–0.06 mg/g), and contact time (120–360 min) for reduction of Pb 2+ were considered taking 15 sets of runs. The optimum value Pb 2+ (99%) was found at 2.90 (g/l) biochar dose, 0.022 (mg/g) heavy metal concentration, and 309 (minutes) time using Box Behnken Experimental Design. The Response Surface Methodology (RSM) employing the Box-Behnken design was used for experimentation. The derived second-degree polynomial regression model shows the strong individual and interactive effects of biochar dosage, heavy metal concentration, and contact time with a higher regression coefficient ( R 2 = 0.9987).

environmental sciences