Abstract:Pure titanium is limited to be used in biomedical applications due to its lower mechanical strength compared to its alloy counterpart. To enhance its properties and improve medical implants feasibility, advancements in titanium processing technologies are necessary. One such technique is equal-channel angular pressing (ECAP) for its severe plastic deformation (SPD). This study aims to surface modify commercially pure titanium using micro-arc oxidation (MAO) or plasma electrolytic oxidation (PEO) technologies, and mineral solutions containing Ca and P. The composition, metallography, and shape of the changed surface were characterized using X-ray diffraction (XRD), digital optical microscopy (OM), and scanning electron microscope (SEM), respectively. A microhardness test is conducted to assess each sample's mechanical strength. The weight % of Ca and P in the coating was determined using energy dispersive spectroscopy (EDS), and the corrosion resistance was evaluated through potentiodynamic measurement. The behavior of human dental pulp cell and periodontal cell behavior was also studied through a biomedical experiment over a period of 1-, 3-, and 7-days using culture medium, and the cell death and viability can be inferred with the help of enzyme-linked immunosorbent assay (ELISA) since it can detect proteins or biomarkers secreted by cells undergoing apoptosis or necrosis. This study shows that the mechanical grain refinement method and surface modification might improve the mechanical and biomechanical properties of commercially pure (CP) titanium. According to the results of the corrosion loss measurements, 2PassMAO had the lowest corrosion rate, which is determined to be 0.495 mmpy. The electrode potentials for the 1-pass and 2-pass coated samples are 1.44 V and 1.47 V, respectively. This suggests that the coating is highly effective in reducing the corrosion rate of the metallic CP Ti sample. Changes in the grain size and the presence of a high number of grain boundaries have a significant impact on the corrosion resistance of CP Ti. For ECAPED and surface-modified titanium samples in a 3.6% NaCl electrolyte solution, electrochemical impedance spectroscopy (EIS) properties are similar to Nyquist and Bode plot fitting. In light of ISO 10993-5 guidelines for assessing in vitro cytotoxicity, this study contributes valuable insights into pulp and periodontal cell behavior, focusing specifically on material cytotoxicity, a critical factor determined by a 30% decrease in cell viability.

STUDYING THE INFLUENCE OF ELECTROLYTIC MEDIUM ON THE STRUCTURAL-PHASE COMPOSITION OF CALCIUM-PHOSPHATE COATINGS OBTAINED BY THE METHOD OF MICROARC OXIDATION ON THE SURFACE OF TITANIUM ALLOY VT1-0

Study on structure and properties of microarc oxidation coating on magnesium alloy in phosphate-potassium hydroxide solution

Surface Modification and Tribological Performance of Calcium Phosphate Coatings with TiO2 Nanoparticles on VT1-0 Titanium by Micro-Arc Oxidation

Effect of plasma-electrolytic oxidation on mechanical properties of titanium coatings

Investigation of the properties of oxide coatings on titanium alloys obtained by plasma electrolytic oxidation

Study on Morphologies and Structures of Ceramic Coating Prepared by Micro-Arc Oxidation on TC4 Alloy

Influence of different modes of microarc oxidation of titanium on the electrochemical properties and surface morphology of the obtained coatings

Effect of Several Inorganic Additives on Microstructure and Properties of Microarc Oxidation Coating on Aluminium Alloy

Preparation of Calcium Phosphate Coating on Titanium Alloy Substrate and Its Mechanism Study

Electrolytic Deposition of Calcium Phosphate Coatings on Titanium Substrate

Fabricating Electroactive Azobenzene Self-Assembled Monolayers and Their Characterization

Electrochemical, Tribological and Biocompatible Performance of Electron Beam Modified and Coated Ti6Al4V Alloy

Effect of electric mode of micro-arc oxidation on structural and phase state of calcium-phosphate coating

Improving Pure Titanium's Biological and Mechanical Characteristics through ECAP and Micro-Arc Oxidation Processes

One-Step Approach for the Fabrication and Characterization of Hydroxyapatite/Tio2 Composite Ceramic Coatings by Micro-Arc Oxidation in Situ on the Surface of Pure Titanium

Calcium Phosphate Coatings Deposited on 3D-Printed Ti–6Al–4V Alloy by Plasma Electrolytic Oxidation

Study on Preparation of Micro-Arc Oxidation Film on TC4 Alloy with Titanium Dioxide Colloid in Electrolyte

Micro-Arc Oxidation Enhances Mechanical Properties and Corrosion Resistance Of Ti-6Al-7Nb Alloy

Study of Micro-arc Oxidation as a Method for Improving the Technical Characteristics of AA5086 Aluminum and VT6 Titanium Alloys

Microstructure and surface performance of hydroxyapatite-modified multilayer amorphous coating on Ti-rich TiNbZrSn medium entropy alloy: A comparative study

Structural, morphological and adhesive properties of calcium phosphate coatings formed on magnesium alloy by micro-arc oxidation method in electrolyte containing dispersed particles