Abstract:Geometric error model and compensation for abrasive water jet cutting. The primary factors affecting the geometric accuracy of abrasive water jet (AWJ) machining of ultra‐thick carbon fiber‐reinforced polymer (CFRP) laminates are the cutting front drag and kerf width deviation caused by energy dissipation. Firstly, this study comprehensively analyzes the influence of the coupling relationship between cutting front drag and kerf width deviation on the geometric accuracy of hole machining. Secondly, a gradient distribution theory for jet traverse speed with cutting depth is proposed for taper hole machining characteristics. Finally, a general geometric error model applicable to both straight and taper hole machining of ultra‐thick CFRP laminates using AWJ is established, along with a geometric error compensation method. A series of experiments validate the accuracy of the proposed geometric error model and compensation method. The novelty of this research lies in unifying the geometric error models for straight and taper hole machining of ultra‐thick CFRP laminates by considering the gradient distribution of jet traverse speed. The proposed error compensation method reduces the high degree of freedom required for machine tools. This study provides a general geometric error model and compensation strategy for AWJ hole machining of ultra‐thick CFRP laminates, which has significant engineering value for achieving 3D controllable AWJ machining of complex ultra‐thick CFRP components. Highlights The high geometric precision taper holes machining technique is a necessary prerequisite for achieving precise machining of complex trajectories in ultra‐thick CFRP with abrasive water jet. The influence of the coupling relationship between cutting front drag and kerf taper on the geometric accuracy of hole processing is comprehensively analyzed. A model considering the gradient distribution of traverse speed during taper holes machining was established, and a geometric error model considering this gradient distribution of traverse speed was developed. A taper holes machining geometric error compensation method with high engineering applicability was proposed. Geometric error prediction experiments and error compensation experiments were conducted, and the results proved the accuracy of the geometric error model and error compensation method.

Geometry accuracy control in abrasive water jet taper hole machining of ultra‐thick carbon fiber‐reinforced polymer (CFRP) laminates

Predicting the geometric morphology of water jet machining in ultra-thick CFRP laminates based on analytical modeling

Modeling of the Cutting Front Profile in Abrasive Water Jet Machining Based on the Energy Balance Approach

Numerical Research on Kerf Characteristics of Abrasive Waterjet Machining Based on the SPH-DEM-FEM Approach

A Unified Geometrical Modeling and Analysis Method for Evaluating CFRP Machining Performance: Cutting Geometry Space

Modeling and Compensation of Volumetric Errors for a Six-Axis Automated Fiber Placement Machine Based on Screw Theory

Quality prediction and process optimization in abrasive waterjet cutting of ultra‐thick carbon fiber reinforced polymer

Integrated error modeling for abrasive waterjet cutting at various nozzle tilt angle

An analytical approach to cutting force prediction in milling of carbon fiber reinforced polymer laminates

A Study on Processing Defects and Parameter Optimization in Abrasive Suspension Jet Cutting of Carbon-Fiber-Reinforced Plastics

Experimental Study on Carbon Fiber-Reinforced Polymer Groove Machining by High-Power Water-Jet-Guided Laser

Hole characteristics and surface damage formation mechanisms of C /SiC composites machined by abrasive waterjet

Experimental and simulation study on the influence factors of abrasive water jet machining ductile materials

An experimental and empirical assessment of machining damage of hybrid glass-carbon FRP composite during abrasive water jet machining

Improving hole quality of thick CFRP laminates through a laser-mechanical compound drilling process

An adaptive approach to error compensation by on-machine measurement for precision machining of thin-walled blade

A novel quantitative analysis approach for hole surface damage of ceramic matrix composites machined by abrasive waterjet

Helical milling for making holes on carbon fiber-reinforced polymer

Improving surface striation and kerf taper of hybrid Al/CFRP stacks using dual-pass abrasive waterjet slotting strategy

Hole quality in longitudinal–torsional coupled ultrasonic vibration assisted drilling of carbon fiber reinforced plastics

Mechanism of C /SiC hole making with high shape precision using abrasive waterjet based on response surface method