Abstract:Geometric error model and compensation for abrasive water jet cutting. The primary factors affecting the geometric accuracy of abrasive water jet (AWJ) machining of ultra‐thick carbon fiber‐reinforced polymer (CFRP) laminates are the cutting front drag and kerf width deviation caused by energy dissipation. Firstly, this study comprehensively analyzes the influence of the coupling relationship between cutting front drag and kerf width deviation on the geometric accuracy of hole machining. Secondly, a gradient distribution theory for jet traverse speed with cutting depth is proposed for taper hole machining characteristics. Finally, a general geometric error model applicable to both straight and taper hole machining of ultra‐thick CFRP laminates using AWJ is established, along with a geometric error compensation method. A series of experiments validate the accuracy of the proposed geometric error model and compensation method. The novelty of this research lies in unifying the geometric error models for straight and taper hole machining of ultra‐thick CFRP laminates by considering the gradient distribution of jet traverse speed. The proposed error compensation method reduces the high degree of freedom required for machine tools. This study provides a general geometric error model and compensation strategy for AWJ hole machining of ultra‐thick CFRP laminates, which has significant engineering value for achieving 3D controllable AWJ machining of complex ultra‐thick CFRP components. Highlights The high geometric precision taper holes machining technique is a necessary prerequisite for achieving precise machining of complex trajectories in ultra‐thick CFRP with abrasive water jet. The influence of the coupling relationship between cutting front drag and kerf taper on the geometric accuracy of hole processing is comprehensively analyzed. A model considering the gradient distribution of traverse speed during taper holes machining was established, and a geometric error model considering this gradient distribution of traverse speed was developed. A taper holes machining geometric error compensation method with high engineering applicability was proposed. Geometric error prediction experiments and error compensation experiments were conducted, and the results proved the accuracy of the geometric error model and error compensation method.

Predicting the geometric morphology of water jet machining in ultra-thick CFRP laminates based on analytical modeling

Modeling of the Cutting Front Profile in Abrasive Water Jet Machining Based on the Energy Balance Approach

Quality prediction and process optimization in abrasive waterjet cutting of ultra‐thick carbon fiber reinforced polymer

Numerical Research on Kerf Characteristics of Abrasive Waterjet Machining Based on the SPH-DEM-FEM Approach

Geometry accuracy control in abrasive water jet taper hole machining of ultra‐thick carbon fiber‐reinforced polymer (CFRP) laminates

An analytical approach to cutting force prediction in milling of carbon fiber reinforced polymer laminates

Modeling and Analysis of Force Prediction in Milling Process of Unidirectional Fiber Reinforced Polymer Composites

A Unified Geometrical Modeling and Analysis Method for Evaluating CFRP Machining Performance: Cutting Geometry Space

Experimental and simulation study on the influence factors of abrasive water jet machining ductile materials

A Study on Processing Defects and Parameter Optimization in Abrasive Suspension Jet Cutting of Carbon-Fiber-Reinforced Plastics

Factor Analysis of Machining Parameters of Fiber-Reinforced Polymer Composites Based on Finite Element Simulation with Experimental Investigation

Prediction of time-varying dynamics and chatter stability analysis for surface milling of thin-walled curved CFRP workpiece

Modeling of dynamic milling forces considering the interlaminar effect during milling multidirectional CFRP laminate

Modeling Evolution of Cutting Force in Ultrasonically Assisted Drilling of Carbon Fiber Reinforced Plastics

A cutting force prediction model for rotary ultrasonic side grinding of CFRP composites considering coexistence of brittleness and ductility

An experimental and empirical assessment of machining damage of hybrid glass-carbon FRP composite during abrasive water jet machining

Force coefficient characterization in machining of UD-CFRP using numerical-analytical approach

Composite Cutting with Abrasive Water Jet

Theoretical model of instantaneous milling force for CFRP milling with a ball-end milling cutter: Considering spatial dimension and temporal dimension discontinuity effects

Experimental Study on Carbon Fiber-Reinforced Polymer Groove Machining by High-Power Water-Jet-Guided Laser

Erosion model for abrasive water jet machining of composite materials