Abstract:Hydropower has been the leading renewable source and cheapest ways to generate electrical energy in the world. In recent years, there has been a major upsurge in the hydropower development because of the use of pump as turbine (PAT). However, the operational reliability of a PAT is greatly affected by the unsteady flow fields; therefore, it is important to examine the unsteady flow behavior which can be used as a reference to reduce the noise, vibration, and cavitation performance for centrifugal pumps working as turbines. Thus, the objective of this study was to evaluate the unsteady flow fields by analyzing the distribution of the pressure pulsations using both numerical and experimental measurements in a PAT operating in pump mode. Firstly, the three‐dimensional (3D) unsteady flow equations were solved using SST <i>k‐</i>ω turbulence model during the numerical calculations. Secondly, the numerical results of the hydraulic pump performance were validated by the experimental measurements for numerical accuracy. Lastly, pressure transducers are positioned at certain monitoring points to measure the pressure in the PAT investigated. The numerical and experimental results show that the main frequency of the pressure pulsation is equal to the blade frequency, and as it deviates from the design operating condition, the magnitude of pressure pulsation intensifies. Furthermore, the impeller eye marked the lowest pressure coefficients especially at the design condition and makes it highly susceptible to cavitation. High pressure coefficients were obviously seen at the pressure side on the blade surface closer to the trailing edge at all studied operating conditions. Meanwhile, the rotor‐stator interaction generated the highest pressure pulsation distribution at the volute tongue. Thus, modification of the volute tongue is an optimal approach of reducing the pressure pulsation intensity in the volute and pump as a whole.

Effect of splitter blades on turbine mode of low specific speed pump

Analysis of Inter-blade Vortex and Runner Blades Force of Pump Turbine during Load Rejection Period

Effect of blade layout on performance of low specific speed pump operating in turbine mode

Investigation of the impact of splitter blades on a low specific speed pump for fluid-induced vibration

Experimental and numerical investigations on pressure pulsation in a pump mode operation of a pump as turbine

Hydraulic Optimization and Loss Analyses of a Low Specific-Speed Centrifugal Pump with Variable-Thickness Blades

Effect of Guide Vane Openings and Different Flow Rates on Characteristics in Pump Mode of Pump-turbine with Splitter Blades

The Splitter Blade Pump–Turbine in Pump Mode: The Hump Characteristic and Hysteresis Effect Flow Mechanism

Cavitation Performance Improvement of High Specific Speed Mixed-Flow Pump

Numerical and experimental characterization of splitter blade impact on pump as turbine performance

Analysis of Rotor-Stator Interaction of a Pump-Turbine with Splitter Blades in a Pump Mode

Numerical investigation of splitter blades on the performance of a forward-curved impeller used in a pump as turbine

Analysis of the Flow Behavior and Pressure Fluctuation of a Pump Turbine with Splitter Blades in Part-Load Pump Mode

Blade Thickness Redesign to Improve Efficiency and Decrease Unsteady Pressure Pulsation of a Low Specific Speed Centrifugal Pump

A Boundary Vorticity Diagnosis of the Flows in a Model Pump-Turbine in Turbine Mode

Numerical investigation of flow characteristics in the front and rear chambers of centrifugal pump and pump as turbine

Effect of 3D Shape of Pump-Turbine Runner Blade on Flow Characteristics in Turbine Mode

Energy Balance and Local Unsteady Loss Analysis of Flows in a Low Specific Speed Model Pump-Turbine in the Positive Slope Region on the Pump Performance Curve

Numerical analysis on flow in pump-turbine in turbine mode at high flow rates

Numerical Simulation of Flow in Semi-Open Centrifugal Impeller with Long-Short Blade

Hydraulic loss analysis in a pump-turbine with special emphasis on local rigid vortex and shear