The Splitter Blade Pump–Turbine in Pump Mode: The Hump Characteristic and Hysteresis Effect Flow Mechanism

Guanghe Dong,Zhumei Luo,Tao Guo,Xiaoxu Zhang,Rong Shan,Linsheng Dai

DOI: https://doi.org/10.3390/pr12020324

IF: 3.5

2024-02-03

Processes

Abstract:This study focuses on the splitter blade pump–turbine as the research object to analyze the problems of hump characteristics and the hysteresis effect. We simulated the operation of the pump condition with small opening of the guide vane, analyzed the hydraulic loss by using the entropy production theory and entropy wall function, and investigated the study of internal flow transfer characteristics. In this paper, it was first verified that the maximum error of the energy loss calculated by the pressure method and the entropy production method was less than 6% for the working zone. From the quantified energy loss results, a significant instability feature was observed in the 0.65 QBEP–0.9 QBEP operating interval, accompanied by the phenomenon of the non-overlapping of the characteristic curves. The results show that the hump characteristic with hysteresis effect also exists in the splitter blade pump–turbine. The percentage of energy loss in the hump zone is in descending order of runner, guide vanes, spiral casing, and draft tube, but this changes again at low flow rates. By analyzing the high-entropy production region, it was found that the high-hydraulic-loss region is mainly distributed at the trailing edge of the long blade in the vane-less space, which is different from the traditional runner.

engineering, chemical

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to analyze the flow mechanisms of the hump characteristics and hysteresis effects that occur when a pump - turbine with split vanes operates in the pump mode. Specifically, the research focuses on the following points:

1. **Hump Characteristics and Hysteresis Effects**: Through the numerical simulation method, the research explores the operation of the pump - turbine under the condition of small guide vane openings, especially analyzes the generation mechanisms of the hump characteristics and hysteresis effects. These characteristics can cause severe vibration, noise, and large - scale fluctuations in pipeline flow during the start - up, shutdown, and flow regulation processes of the pump, and in severe cases, can even cause the surging phenomenon of the pump.

2. **Energy Loss Analysis**: Using the entropy production theory and the entropy wall function method, the research studies the energy losses in the fluid transfer process inside the pump - turbine. By quantifying the energy losses of different components, the research finds that in the operating range from 0.65 QBEP to 0.9 QBEP, the energy losses increase significantly, and the characteristic curves do not overlap, indicating obvious unstable characteristics.

3. **High - Entropy - Production - Area Analysis**: The research also analyzes the distribution of high - entropy - production areas and finds that in the bladeless space, the high - hydraulic - loss areas at the trailing edges of long vanes are mainly concentrated in high - entropy - production areas, which is different from the situation of traditional runners.

4. **Optimization Suggestions**: Through in - depth analysis of the internal flow characteristics, the research aims to provide references for improving the stable operation performance of the pump - turbine, reducing pressure pulsations, and improving efficiency, especially in the rapidly developing pumped - storage power station field, this problem is particularly important.

In summary, through detailed numerical simulations and theoretical analyses, this paper reveals the flow mechanisms of the hump characteristics and hysteresis effects when the pump - turbine with split vanes operates in the pump mode and proposes relevant optimization suggestions.