Abstract:Stealth technology encompasses various techniques to minimize the detection of acoustic, visual, infrared, and electromagnetic (EM) wave signals. Specifically, to minimize the radar cross section (RCS) of the radar system, radar-absorbing structures (RAS) capable of absorbing EM waves are essential. RAS composed of composites can be damaged, and both their structural and EM performances become important issues in RAS studies. Therefore, in this study, EM wave interactions in damaged specimens were evaluated and visualized using a scanning free-space measurement (SFM) system. First, the change in the EM performance due to damage was analyzed using Al-alloy 6061 and Teflon specimens. When the damage size was less than one-half wavelength (30 mm and 20 mm) in both the X (8.2~12.4 GHz) and Ku (12.4~18 GHz) bands, the return loss of Al-alloy 6061 was close to 0 dB and the real part of the permittivity was between 2 and 2.1. On the other hand, when the damage size was more than one-half wavelength, the EM performance in terms of the return and insertion loss and the EM properties of the material (such as the permittivity) were changed in both Al-alloy 6061 and Teflon specimens. Second, a nickel fiber-based RAS with lightning strike-induced damage was also tested by the SFM system, and a behavior similar to that of non-stealth specimens was observed. The RAS was also tested by a pulse-echo ultrasonic propagation imager (PE-UPI) system to investigate the internal damage induced by the lightning strike. Much larger delaminations than the penetration occurred at different plies of the RAS. Eventually, it was found that not only the penetration damage but also the delaminations predominantly affected the EM performance, which caused the overall stealth degradation.

Investigation of scarf-patch-repaired radar-absorbing composite using circuit-analog absorbers subjected to low-velocity impact loads

Elasto-plastic impact model and experimental study of new absorber for structural collision protection

Influence of Impact on Electromagnetic Response of Three-Dimensional Angle-Interlock Metacomposites

Impact Damage Detection in Patch-Repaired CFRP Laminates Using Nonlinear Lamb Waves

Investigation of the damage effect on electromagnetic performance evaluation of a radar absorbing structure

Study on impact resistance and parameter optimization of patch‐repaired plain woven composite based on multi‐scale analysis

Optimal Design of Broadband Radar Absorbing Sandwich Structure with Circuit Analog Absorber Core

Investigating damage resistance in aerospace radome applications: Experimental analysis of hybrid sandwich composites

Absorbing and Shielding Properties of a Hybrid Patterned Composite Containing CIPs and Carbon Fiber

The Effect of Patch Geometry on the Static and Fatigue Behaviors of Defective Aluminum Panels Repaired with A Composite Patch

Experimental and simulation study on bonded repaired low-velocity impact of carbon fiber reinforced plastic laminates for rail vehicles

Empirical and numerical analysis of damage tolerance in multifunctional hybrid sandwich fiber reinforced polymers composite structures for aerospace applications using compression after impact (CAI) testing

Electromechanical behavior of radar-absorbing thermoplastic composites with nickel-coated glass/polyamide 6 under high humidity conditions

Dynamic Response and Fracture Mechanism of a Novel Structural Radar Absorbing Material

A parametric study on patch repaired quasi‐isotropic laminate in high‐velocity impact environment: Experimental and numerical investigation

Experimental study of energy absorption in 3D-textile reinforced polymer composites under high-velocity impact loading

Design of Patch Sensors for Microwave Nondestructive Evaluation of Aircraft Radomes

Mechanical properties of UV‐curable carbon fiber‐reinforced polymer composite patch: Repair evaluation of damaged aluminum alloy

Preparation of a Flexible X-Band Radar-Wave-Absorbing Composite Material by Using Beta-Silicon Carbide and Polyurethane as Substrates and Multiwalled Carbon Nanotubes as Additives

Failure analysis of the patch repaired E-glass chopped fiber strand mat/epoxy composites

Experimental study on protective performance of ACF sandwich composites with different configurations in high-velocity impact