Abstract:Hydrogen as an important clean energy source with a high energy density has attracted extensive attention in fuel cell vehicles and industrial production. However, considering its flammable and explosive property, gas sensors are desperately desired to efficiently monitor H2 concentration in practical applications. Herein, a facile polymerization-induced aggregation strategy was proposed to synthesize uniform Si-doped mesoporous WO3 (Si-mWO3) microspheres with tunable sizes. The polymerization of the melamine-formaldehyde resin prepolymer (MF prepolymer) in the presence of silicotungstic acid hydrate (abbreviated as H4SiW) leads to uniform MF/H4SiW hybrid microspheres, which can be converted into Si-mWO3 microspheres through a simple thermal decomposition treatment process. In addition, benefiting from the pore confinement effect, monodispersed Pd-decorated Si-mWO3 microspheres (Pd/Si-mWO3) were subsequently synthesized and applied as sensitive materials for the sensing and detection of hydrogen. Owing to the oxygen spillover effect of Pd nanoparticles, Pd/Si-mWO3 enables adsorption of more oxygen anions than pure mWO3. These Pd nanoparticles dispersed on the surface of Si-mWO3 accelerated the dissociation of hydrogen and promoted charge transfer between Pd nanoparticles and WO3 crystal particles, which enhanced the sensing sensitivity toward H2. As a result, the gas sensor based on Pd/Si-mWO3 microspheres exhibited excellent selectivity and sensitivity (Rair/Rgas = 33.5) to 50 ppm H2 at a relatively low operating temperature (210 °C), which was 30 times higher than that of the pure Si-mWO3 sensor. To develop intelligent sensors, a portable sensor module based on Pd/Si-mWO3 in combination with wireless Bluetooth connection was designed, which achieved real-time monitoring of H2 concentration, opening up the possibility for use as intelligent H2 sensors.

Effect of Structural Changes of Pd/WO 3 Thin Films on Response Direction and Rate in Hydrogen Detection

A Reliable and Fast Hydrogen Gas Leakage Detector Based on Irreversible Cracking of Decorated Palladium Nanolayer Upon Aligned Polymer Fibers

Preparation and Hydrogen-Sensitive Property of WO3/Graphene/Pd Ternary Composite

Micro Hydrogen Sensor Based on Pd-Ag Nanofilm

Gasochromic WO 3 /MoO 3 sensors prepared by co-sputtering for hydrogen leak detection with long-lasting visible signal

Surface Plasmon Resonance Hydrogen Sensor by Using a Au-Pd Thin Film Transducing Layer

Sensitization of Pd Loading for Remarkably Enhanced Hydrogen Sensing Performance of 3DOM WO3

Hydrogen detecting characteristics of a palladium nanoparticle/indium gallium oxide based sensor

Substantially Accelerated Response and Recovery in Pd‐Decorated WO3 Nanorods Gasochromic Hydrogen Sensor

An easy-fabricated hydrogen gas sensor based on palladium-decorated polyurethane nanofibers

Highly Durable Chemoresistive Micropatterned PdAu Hydrogen Sensors: Performance and Mechanism

Enhancement of H2 Gas Sensing Using Pd Decoration on ZnO Nanoparticles

Polymerization-Induced Aggregation Approach Toward Uniform Pd Nanoparticle-Decorated Mesoporous SiO2/WO3 Microspheres for Hydrogen Sensing.

Three-Dimensional Porous Carbon/Nitrogen Framework-Decorated Palladium Nanoparticles for Stable and Wide-Concentration-Range Hydrogen Sensing

Pd films on soft substrates: a visual, high-contrast and low-cost optical hydrogen sensor

Enhanced Pd/a‐WO3/VO2 Hydrogen Gas Sensor Based on VO2 Phase Transition Layer

Study of a New Hydrogen Gas Sensor Synthesized With a Sputtered Cerium Oxide Thin Film and Evaporated Palladium Nanoparticles

Paper-Based Hydrogen Sensors Using Ultrathin Palladium Nanowires

Influence of the Pd Oxidation State in PdNi Thin Films on Surface Acoustic Wave Hydrogen Sensing Performance

Study of a palladium nanoparticle/ In-Zn-O thin film-based hydrogen gas sensor

Metal-polymer hybrid chemiresistive sensor for low concentration fast hydrogen detection