Abstract:Abstract An experimental investigation was carried out to evaluate the feasibility of using a liquid rubber‐modified epoxy resin to improve the bonding durability between steel and carbon fiber‐reinforced polymer (CFRP) plates in a freeze–thaw environment. Forty‐eight CFRP‐steel double strap joints were prepared, with a focus on two key factors: the number of freeze–thaw cycles (0, 50, 100, and 200 cycles) and the amount of liquid rubber in the adhesive (0%, 5%, 10%, and 15% by mass). The bond properties encompassing the damage mode, the ultimate capacity, and the bond–slip response of the CFRP‐steel joints were examined, respectively. The study revealed that the ultimate capacity of the joints decreased as the freeze–thaw cycles increased. The ultimate capacity retention rate for unmodified joints, after undergoing 200 freeze–thaw cycles, was approximately 84.9%, while for the modified joints, it ranged from 90.5% to 96.4%. Furthermore, the impact of the freeze–thaw cycles and liquid rubber content on the key bond indicators in terms of the maximum shear stress τ max , initial slip S 1 , maximum slip S f , and fracture energy G f were ascertained, leading to the establishment of the bond–slip degradation relationship of the liquid rubber modified CFRP‐steel interface under freeze–thaw environment. Highlights The effects of the liquid rubber content and freeze–thaw cycles on the mechanical properties of the epoxy resin‐based adhesive were determined. The influences of both the liquid rubber content and freeze–thaw cycles on the CFRP‐steel interface were analyzed. The bond–slip degradation relationships of the liquid rubber‐modified CFRP–steel interface under freeze–thaw cycles were developed.

Failure of the SRC under freeze- thaw cycles by the push-out tests

Development of Internal Moisture Transfer and Cumulative Residual Strain in Concrete under Freeze-Thaw Cycles

Effects of Freeze-Thaw Cycles on the Behavior of the Bond Between CFRP Plates and Concrete Substrates

Stress Analysis for Concrete Materials under Multiple Freeze-Thaw Cycles

Effects of Freeze-Thaw Cycles on Interfacial Shear Transfer Characteristics in Section Steel Reinforced Concrete Composite Structures with Stud Connectors

STUDY OF DURABILITY OF CFRP PLATES-CONCRETE INTERFACE UNDER FREEZE-THAW CYCLES

Flexural behaviour of reinforced concrete members subjected to freeze-thaw cycles

Experimental study on bond performance of recycled coarse aggregates concrete with circular steel tubes after freeze–thaw cycling

Effect of freeze–thaw cycles on the stress–strain curves of unconfined and confined concrete

Flexural Behaviour of Reinforced Concrete Beams under Freeze–thaw Cycles and Sustained Load

Bond Behavior of Steel Bars in Concrete Confined with Stirrups under Freeze-Thaw Cycles

Shear Bond Performance at Interface of Concrete-Filled Steel Tube after Freeze-Thaw Cycles

Stress-strain relationship of concrete in freeze-thaw environment

Evaluation of freeze-thaw damage on concrete material and prestressed concrete specimens

Effects of Freeze-Thaw and Dry-Wet Conditionings on the Mode-I Fracture of FRP-Concrete Interface Bonds

Durability of the liquid rubber‐modified CFRP ‐steel interface under freeze–thaw cycles

Deterioration of interfacial bonding performance between metal mortar and concrete under the coupling effect of freeze-thaw cycle and abrasion

Study on bond properties between near-surface mounted BFRP bars and concrete under freeze-thaw cycles in seawater

The Influence of Freeze–Thaw Cycles and Corrosion on Reinforced Concrete and the Relationship between the Evolutions of the Microstructure and Mechanical Properties

Effect of freeze-thaw cycles on tensile properties of CFRP, bond behavior of CFRP-concrete, and flexural performance of CFRP-strengthened concrete beams

Study on Bonding Property between Steel Rebars and Concrete Caused by Freeze-Thaw Action