Abstract:Synergistic external and internal effects of ZTO coating and Zr doping not only relieve lattice strain by avoiding inhomogeneity of the Li‐ion concentration in the secondary spherical particles, but also anchors the lattice O to stabilize crystal structure for ensuring the smooth transportation of Li‐ion, thus preventing the nucleation of intragranular fractures and following cracking formation. Intergranular cracking of Ni‐rich layered LiNi1‐x‐yCoxMnyO2 (1‐x‐y ≥ 0.8) cathode particles deteriorate the chemo–electro–mechanical stability of high‐energy lithium‐ion batteries (LIBs), thus presenting a challenge to typical modification methods to establish robust structures with highly efficient lithium‐ion storage. Herein, the ZrTiO4 (ZTO) as an epitaxial layer to enhance mechanical stability of ultrahigh‐Ni LiNi0.9Co0.05Mn0.05O2 (NCM90) is reported for the first time. Intensive exploration from structure characterizations (X‐ray absorption spectroscopy and in situ X‐ray diffraction techniques), multi‐physics field analysis, and first‐principles calculations disclose that the conformal ZTO layers and Zr doping effectively suppresses the internal strain and the release of lattice oxygen, which prodigiously restrains the local stress accumulation during whole (de)lithiation processes, thereby maintaining good mechanical stability of the materials. Meanwhile, the protective ZTO layer also prevents electrolyte erosion, thus keeping an intact surface structure of NCM90. Notably, ZTO‐modified NCM90 achieves significantly improved cyclability under high‐voltage (4.5 V) operation, expressing a 17% increase in capacity retention (71% vs 88%) after 100 cycles. Overall, this work reveals the role of internal strain in the original degradation behavior and effectiveness of surface engineering strategy to solve the challenge, emphasizing that the conformal surface protection mitigates the internal stress of Ni‐rich NCM by anchoring the lattice oxygen.

Spontaneous Strain Buffer Enables Superior Cycling Stability in Single-Crystal Nickel-Rich NCM Cathode

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Well-dispersed single-crystalline nickel-rich cathode for long-life high-voltage all-solid-state batteries

Realizing Superior Cycling Stability of Ni-Rich Layered Cathode by Combination of Grain Boundary Engineering and Surface Coating

Unique insights into the design of low-strain single-crystalline Ni-rich cathodes with superior cycling stability

Insights into the Enhanced Cycling Stability of Cobalt-Free Single-Crystal Layered Oxide Cathodes at Elevated Voltage

Surface Atomic Rearrangement with High Cation Ordering for Ultra-Stable Single-Crystal Ni-Rich Co-Less Cathode Materials

Structural Reinforcement through High-Valence Nb Doping to Boost the Cycling Stability of Co-Free and Ni-Rich LiNi 0.9 Mn 0.1 O 2 Cathode Materials

Dual-Element-Modified Single-Crystal LiNi0.6Co0.2Mn0.2O2 As a Highly Stable Cathode for Lithium-Ion Batteries.

Suppressed Internal Intrinsic Stress Engineering in High‐performance Ni‐rich Cathode via Multilayered In‐situ coating Structure

A Comparative Investigation of Single Crystal and Polycrystalline Ni‐Rich NCMs as Cathodes for Lithium‐Ion Batteries

Improving the cycling and air-storage stability of LiNi<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub> through integrated surface/interface/doping engineering

Mechanistic Origin for High Structural Stability of Single Crystalline Nickel‐Rich Cathode Materials Via Al and Sm Co‐Doping

Modifying surface chemistry and stress concentration to enable highly stable ultrahigh-Ni cathodes

Crack-free Single-Crystalline Ni-rich Layered NCM Cathode Enable Superior Cycling Performance of Lithium-Ion Batteries

Electrochemical performances of nickel‐rich single‐crystal LiNi0.83Co0.12Mn0.05O2 cathode material synthesized by tuning Li+/Ni2+ mixing

Excellent cycling performance of high-nickel single-crystal cathode material by a well-tailored binary molten-salt method

Improving the Structure and Cycling Stability of Ni-Rich Layered Cathodes by Dual Modification of Yttrium Doping and Surface Coating

Enabling Superior Cycling Stability of LiNi0.9Co0.05Mn0.05O2 with Controllable Internal Strain

Highly‐Dispersed Submicrometer Single‐Crystal Nickel‐Rich Layered Cathode: Spray Synthesis and Accelerated Lithium‐Ion Transport