Thermo-hydrodynamic analysis of journal bearings operating with non-Newtonian oils

Mateus da Silva Cardoso,Diego Berti Salvaro,Aloisio Nelmo Klein,Álvaro Toubes Prata,Cristiano Binder

DOI: https://doi.org/10.1007/s40430-024-04804-2

IF: 2.361

2024-03-19

Journal of the Brazilian Society of Mechanical Sciences and Engineering

Abstract:In recent years, sustainability has become one of the topics of major concern in technological progress, and reducing energy consumption is one of the biggest challenges. The refrigeration industry is responsible for approximately 20% of the total electricity consumption worldwide. The miniaturization, mass reduction and increased rotation speeds lead to higher shear rates. In turn, at these levels, many oils may exhibit non-Newtonian behaviors. The ability to assess non-Newtonian effects can help in selecting and developing more efficient lubricants, where even a slight increase in efficiency can result in substantial energy savings. Thus, this paper investigates the effects of using different non-Newtonian oils in a standard journal bearing of a household refrigerator compressor. For this purpose, a thermo-hydrodynamic model was proposed where the modified Reynolds equation for fluids obeying a power-law viscosity model coupled with the energy equation is solved using the finite volume method in an iterative process. The cavitation boundary is calculated using the conservation of mass equation and is updated at each iteration. The parameters of the power-law curve fitting were obtained from experimental data fitting. The obtained results show that even for slight deviations from Newtonian behavior, significant variations in load capacity and friction force can be observed. Under the same operating conditions, the load capacity and friction force are 67% and 64%, respectively, lower for the bearing operating with an alkylbenzene oil than compared to a polyolester oil, while the consistency parameter at is 90% lower.

engineering, mechanical