Abstract:An experimental perovskite solar cell (PSC) with the structure Au/Spiro-MeOTAD/CH3NH3PbI3/PEDOT:PSS/ITO was fabricated. The measurements of main photovoltaic characteristics were provided. The current-voltage dependences (I-V curves) were measured conducted in the voltage range from -1V to 1V. During the measurements, the corresponding values were calculated of the short-circuit current density(Jsc) and open-circuit voltage(Uoc) were obtained as 1.23 mA/cm2 and 0.19 V, respectively. Subsequently, an analytical model corresponding to this structure was formulated. For modeling the parameters of the perovskite solar cell, the Comsol Multiphysics environment was used, this environment is based on the finite element method. The relevant computations were provided to obtain the corresponding values of the short-circuit current density and open-circuit voltage as 3.29 mA/cm2 and 0.2 V, respectively, with the maximum theoretically calculated power of this structure being 0.11 W. The experimental outcomes were juxtaposed with the predictions of the analytical computations, and the modeling results were empirically validated. An analytically accomplished model of the same structure was built by adding an electron transport layer (ETL). An organic material BCP (Bathocuproine) was used as an supplementary ETL layer. During the optimization of the PSC, the main datums were mathematically counted. Such values as the short-circuit current density of 10.17 mA/cm2, open-circuit voltage of 1.2 V, and the maximum power value of Au/BCP/Spiro-MeOTAD/CH3NH3PbI3/PEDOT:PSS/ITO structure, which is 3.21 W were rated. A comparison of the volt-ampere characteristics of perovskite cells in dark and light modes was conducted for primary and optimized structures. The main parameters, obtained during the modeling of the experimental sample and subsequent model optimization, were compared. Specifically one of the key parameters of solar cell heterostructures the fill factor was evaluated and found to have increased from 16.52% to 25.00%, respectively. The light-sensitive behavior of the perovskite cell were visibly enhanced.

Simulation in SCAPS-1D and optimization of a perovskite solar cell

Numerical investigation of structural optimization and defect suppression for high-performance perovskite solar cells via SCAPS-1D

Study and Optimization of a New Perovskite Solar Cell Structure Based on the Two Absorber Materials Cs2TiBr6 and MASnBr3 Using SCAPS 1D

Structural optimization of inverted CsPbI2Br perovskite solar cells for enhanced performance via SCAPS-1D simulation

Numerical analysis of high performance perovskite solar cells with stacked ETLs/C60 using SCAPS-1D device simulator

Numerical simulation and performance optimization of a lead-free inorganic perovskite solar cell using SCAPS-1D

Performance Enhancement of an all-inorganic perovskite solar cell by using SCAPS and DFT extracted parameters of CuX (X = I, Cl, Br)

Design and simulation of CsPb.625Zn.375IBr2-based perovskite solar cells with different charge transport layers for efficiency enhancement

SCAPS-1D Simulation for Device Optimization to Improve Efficiency in Lead-Free CsSnI3 Perovskite Solar Cells

Performance optimization of eco-friendly CH3NH3SnI3based perovskite solar cell employing CH3NH3SnBr3as hole transport layer by SCAPS-1D device simulator

Numerical analysis of ultra-thin MASnI3 based perovskite solar cell by SCAPS-1D

Enhancement in MAPbI[math]Clx-based perovskite solar cell performance using numerical simulation

Numerical simulation and optimization of CsPbI3-based perovskite solar cell to enhance the power conversion efficiency

Parametric optimization for the performance analysis of novel hybrid organo-perovskite solar cell via SCAPS-1D simulation

Performance optimisation of n-i-p type CH3NH3PbI3 based perovskite solar cells using SCAPS 1-D device simulation

Design and numerical investigation of efficient (FAPbI3)1−x(CsSnI3)x perovskite solar cell with optimized performances

Enhanced efficiency of bifacial perovskite solar cells using computational study

Defect and doping concentration study with series and shunt resistance influence on graphene modified perovskite solar cell: A numerical investigation in SCAPS-1D framework

OPTIMIZATION OF THE PEROVSKITE SOLAR CELL STRUCTURE

Optimization of an inorganic lead free RbGeI3 based perovskite solar cell by SCAPS-1D simulation

Optimizing the Efficiency and Stability of CsSnCl3-based Perovskite Solar Cells using SCAPS Simulation Tool